Archive

Saturday, November 22, 2014


This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use her work. You can get it 
and her work here at Tubes 4 Taggers.
PTU kit Sparkles N Spikes by Amy Marie.
Mask of choice. I used MB and SW Mask 39 by Moonbeans and Spiderwebs.
Font of choice. I used Times New Romance.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

pp4 - 75%
MB and SW Mask 39
93 - 95%
64
97
106
119 - 50%
33
tube - 65% or to fit
drop shadow -10, 8, 50, 10
98
34


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste pp4 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste 93 as new layer. Add drop shadow.

Copy and paste 64 as new layer. Add drop shadow.

Copy and paste 97 as new layer. Add drop shadow.

Copy and paste 106 as new layer. Add drop shadow.

Copy and paste 119 as new layer. Move to top left of the heart.**
Add drop shadow.

Copy and paste 33 as new layer. Move to top right.**
Add drop shadow.

Copy and paste tube as new layer. Add drop shadow with
following settings... -10, 8, 50, 10.

Copy and paste 98 as new layer. Move to bottom of tag.**
Add drop shadow.

Copy and paste 34 as new layer.

Add proper copyright. url and Lic if required.
Add name ( on name I used background white foreground black with 
a stroke of 2.)and your done.

This tutorial was written by Rebecca Townsley on 11/22/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Sexy Sparkles in the subject line
Can't wait to check them out!

Saturday, October 25, 2014

This tut was made using PSPx5.
And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use her work. You can get it 
and her work here at Mystical Scraps
She also has her own store called Tubes 4 Taggers.
FTU kit Evil Ann and Andy by Wicked Princess Scraps.
Mask of choice. I used Mask 56 MB and SW by Moonbeams and Spiderwebs.
Font of choice. I used Angry Blue.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Mask 56 MB and SW
WP_EAA_PP10 - 75%
WP_EAA_BARBEDWIREFRAME - 65%
WP_EAA_CHAINEDBLEADINGHEARTS - 50%
Tube - 15% or resize to fit
WP_EAA_CORNER - 65%
WP_EAA_DISTURBEDWORDART - 50%
WP_EAA_SKELOTONHANDSINCAN - 35%
WP_EAA_BOTTLES - 35%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste WP_EAA_PP10 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group. Dupicate, Merge 
down.

Copy and paste WP_EAA_BARBEDWIREFRAME as new layer. Add drop shadow.

Copy and paste WP_EAA_CHAINEDBLEADINGHEARTS as new layer. Move to top
left of frame.** Add drop shadow.

Copy and paste Tube as new layer. Add drop shadow.

Copy and paste WP_EAA_CORNER as new layer. Move to bottom
right of tag.** Add drop shadow.

Copy and paste WP_EAA_DISTURBEDWORDART as new layer. Move to
top of tag.** Add drop shadow.**

Copy and paste WP_EAA_SKELOTONHANDSINCAN as new layer. Move to
bottom right of tag.** Add drop shadow.

Copy and paste WP_EAA_BOTTLES as new layer. Move to bottom
left of tag.** Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 10/25/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Disturbed in the subject line
Can't wait to check them out!
Friday, October 24, 2014


This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Barbara Jensen.
You need a license to use her work. You can get it 
and her work here at Barbara Jensen Tubes.
PTU kit Cheeky Trixster by Toxic Desires.
You can get it Scrap Candy Store.
Font of choice. I used Brush Script STD.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Moon
Frame 2 - 75%
tube - 75% or resize to fit
Splatter
Spider - 50%
Bat - 40%
Bat in a Box - 40%
Wordart - 50%
Sparkles


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste Moon as new layer. Add drop shadow.

Copy and paste Frame as new layer. Add drop shadow.

Copy and paste Tube as new layer. Move to right of tag.**
Add drop shadow.

Copy and paste splatter and move to upper left. Duplicate
Move to right of tag. Merge down, Duplicate Move down to 
bottom of tag.**

Copy and paste Spider as new layer. Move to top left.**
Add drop shadow.

Copy and paste Bat as new layer. Move to bottom left of tag.**
Add drop shadow.

Copy and paste Bat in a Box as new layer. Move to bottom
right of tag.** Add drop shadow.

Copy and paste Wordart as new layer. Move to bottom of tag.**
Add drop shadow.

Copy and paste Sparkles as new layer.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 10/24/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Boo Halloween in the subject line
Can't wait to check them out!

Thursday, October 23, 2014




This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used Zombie Birthday by Joahannah von Frankenstein.
You need a license to use her work. You can get it 
and her work here at The PSP Project.
Also Using the matching PTU kit Zombie Birthday by Wicked Princess Scraps.
Also available at The PSP Project.
Template of Choice. I used by Timeline Banner #2 made by ME Designz by BabyDragon.
Font of choice. I used ZOMBIFIED.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Timeline Banner Template #2
tube - 75%
WP_ZB_PP6
WP_ZB_PP5
WP_ZB_PP9 - 50%
WP_ZB_PP1
WP_ZB_CANDY3 - 30%
WP_ZB_HANDS1 
WP_ZB_GIFT1 - 20%
WP_ZB_GIFT2 - 20%
WP_ZB_BEAR - 40%
WP_ZB_CUPCAKE1 - 40%
WP_ZB_BOW - 75%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open the template and hit shift+d to duplicate.
Close original. Delete the Info layer and on the Avitar
spot change opacity to 25 for now so you can still see it
but under it as well. This will be deleted when done. 
Delete word layer.

Change forground to pattern using WP_ZB_PP6 and flood fill
Background layer.

Now chsnge pattern to WP_B_PP5 and flood fill layer 1.
Add drop shadow.

Merge Layer 5 down to 4 and merge that layer down as well 
so all three circles are on same layer. Selections all - Float 
defloat - invert.

Copy and paste WP_ZB_PP9 as new layer. Move to ovet the circles.
Delete, Selections none. Add drop shadow.

Change forground to pattern using WP_ZB_PP1 and flood fill
Layers 6 and 7. Add drop shadow.

Copy and paste Tube as new layer. Move to the right of template
and place as top layer. Add drop shadow.

On the balloon layers using Manual Color Correction change color 
of ballons to a color from the tube. Duplicate, Effects 3D, Cut out
Settings Offset Vertical 0 Horizontal 0 Opacity 100 Blur 36
Color a darker color then what the balloon is. Hit ok Merge down.
Add drop shadow to both.

Copy and paste WP_ZB_HANDS1 as new layer over the stripes layer.
Add drop shadow.

Copy and paste WP_ZB_BOW as new layer over the hands. Move down
a bit.** Add drop shadow.

Copy and paste WP_ZB_BEAR as new layer over the tube layer. Move
to the right of tag.** Add drop shadow.

Copy and paste WP_ZB_GIFT2 as new layer. Move to left of bear.**
Add drop shadow.

Copy and  WP_ZB_CUPCAKE1 as new layer and move just to the right of
the grey avi square.** Add drop shadow.

Copy and paste WP_ZB_GIFT1 as new layer and move to the right
of the cupcake.** Add drop shadow.

Copy and paste WP_ZB_CANDY3 as new layer. Move to just over the grey
avi square to look like it it sitting on top of it.** Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 10/23/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Zombie Birthday in the subject line
Can't wait to check them out!

Thursday, September 11, 2014



This tut was made using PSPx5.
And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used one by Arthur Crowe.
You need a license to use his work. You can get it 
and his work here at Arthur Crowe Factory.
PTU kit Fall Down Home by Amy Marie.
You can get it at The PSP Project.
Mask of choice. I used MB and SW Mask 14 by Moonbeams and Spiderwebs.
Font of choice. I used Adine Kirnberg.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

MB and SW Mask 14
pp11
91 (plant)
tube - 60% or resize to fit
43 (frame)
57 (grass)
42 (scarebear) - 60%
19 (turkey on log) - 40%
20 (free pumpkins) - 40%
21 (pumpkin patch sign) - 90%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste pp11 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste 91 (plant) as new layer. Move to right a bit.**
Duplicate move to left.**

Copy and paste tube as new layer. Add drop shadow.

Copy and paste 43 (frame) as new layer. Add drop shadow.
On tube layer selections, all, float, defloat. Erase on 
the frame layer over head.** Selections none.

Copy and paste 57 (grass) as new layer. Move to bottom left.**
Duplicate move to right.**

Copy and paste 42 (scarebear) as new layer. Move to bottom 
of tag.** Add drop shadow.

Copy and paste 19 (turkey on a log) as new layer. Move to 
right of tag and down a tad.** Add drop shadow.

Copy and paste 20 (free pumpkins) as new layer. Move under the
turkey.** Add drop shadow.

Copy and paste 21 (pumpkin patch sign) as new layer. Move to
bottom left of the tag.** Add drop shadow.


Add proper copyright. url and Lic if required.
Add name and your done. For more shadow effect duplicare name after
adding the drop shadow.

This tutorial was written by Rebecca Townsley on 9/11/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Pumpkin Patch in the subject line
Can't wait to check them out!




This tut was made using PSPx5.
And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use hers work. You can get it 
and her work here at Tubes 4 Taggers.
PTU kit The Vampire Seduction by Wicked Princess Designs.
You can get it at The PSP Project.
Mask of choice. I used Mask 43 MB and SW by Moonbeams and Spiderwebs.
Font of choice. I used Day of the Tentacle.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Mask 43 MB and SW
WP_VS_PP20 - 75%
WP_VS_CASTLE - 65%
WP_VS_TREE4 - 85%
WP_VS_FOILAGE - 85%
Tube - 65% or resize to fit
WP_VS_GRASS2 - 55%
WP_VS_CLOUD
WP_VS_CLOUD2 - 95%
WP_VS_WINGEDSKULL - 65%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste WP_VS_PP20 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste WP_VS_CASTLE as new layer. Move up and to the right
a bit.**

Copy and paste WP_VS_TREE4 as new layer. Move to the right.**

Copy and paste WP_VS_FOILAGE as new layer. Move to the left.**

Copy and paste tube as new layer. Move down or up a bit.**
Add drop shadow.

Copy and paste WP_VS_GRASS2 as new layer. Move down to bottom of
the tube.**

Copy and paste WP_VS_CLOUD as new layer. Move to over Grass layer.**

Copy and paste WP_VS_CLOUD2 as new layer. Move to over other cloud layer.**

Copy and paste WP_VS_WINGEDSKULL as new layer. Move to bottom of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 9/11/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Dia Delos Muertos in the subject line
Can't wait to check them out!