This tut was made using PSPx7.
And knowledge of PSPx7.

Supplies needed

PTU kit "Amok Amok Amok" by "Creative Scraps by Crys".
Sold at the following Stores.

Mystical Scraps

Scraps and Company

Mask "MB and SW Mask 84" by "Moonbeams and Spiderwebs".
Font of choice. I used "Vladimir Script".

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

AAA_Paper_2 = 75%
MB and SW Mask 84
AAA_Element_28 (tree) = 90%
AAA_Element_3 (black hair sister) = 50%
AAA_Element_2 (blonde hair sister) = 50%
AAA_Element_1 (red hair sister) = 50%
AAA_Element_12 (cauldron) = 75%
AAA_Element_40 (sparkles)


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600x600.

Copy and paste AAA_Paper_2 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group.

Copy and paste AAA_Element_28 (tree)as new layer.

Copy and paste AAA_Element_3 (black hair sister) as new layer and move to left.** Add drop shadow.

Copy and paste AAA_Element_2 (blonde hair sister) as new layer and move to right.** Add drop shadow.

Copy and paste AAA_Element_1 (red hair sister) as new layer. Make sure she is center of the other two.** Add drop shadow. 

Copy and paste AAA_Element_12 (cauldron) as new layer. Move down a bit.**

Copy and paste AAA_Element_40 (sparkles) as new layer.

Shadow I used on words is as follows 2.2.100.3

Add proper copyright. url and Lic if required.
With just using a kit like I did with this one, you would put
Kit "Amok Amok Amok" by Creative Scraps by Crys www.sinfullycreativescraps.blogspot.com
Add name and your done.

This tutorial "I put a Spell on you" was written by Rebecca Albertson on 10/24/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"I put a Spell on you" tut in the subject line.
Can't wait to check them out!

These tags were made using the Awesome kit "My Happy Ending" made by Creative Scraps by Crys. This kit has 77 Elements and 14 Papers. You can get this kit at the following stores...

Scraps & Company

Dance in the Rain

You can also get many more of her wonderful creations there and at Mystical Scraps.

For more information on all her products just go check out her Blog!

Creative Scraps By Crys Blog.

This tut was made using PSPx9.
And knowledge of PSPx9.

Please bare with me as I have not written a tut in almost a year,

if not in over a year.

Supplies needed

PTU kit Attitude Adjustment by Creative Scraps by Crys. 

You can get it at these stores.
Mystical Scraps 

Scraps and Company 

Dance in the Rain Scraps 

Font of choice. I used Unicorns are Awesome which is PU only unless you contact the designer.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

AA_Paper_3
AA_Element_28 (Colored Swirl Clouds)
AA_Paper_2
AA_Element_18
AA_Frame_2
AA_Element_28
AA_Element_2 - 75%
AA_Element_57 - 50%

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 851 x 315 as we are doing a Facebook timeline banner.

 Using the AA_Paper_3, go to your image you are working on. Click on your flood tool. In materials section, change it from color to pattern, right click on the pattern box and click other, than find the paper in the choices and click on it, then click ok. Now using your flood tool, just click inside the image and it will fill the image with the paper.  

 

Copy and paste, AA_Element_28(Colored swirl clouds), as a new layer and then move to the bottom left.** Add drop shadow.

 

Copy and paste AA_Paper_2 as a new layer.

Copy and paste AA_Element_18(Colorful see through stars) as a new layer.

Copy and paste AA_Frame_2(3 joined circles) as a new layer. Move up just a tad.** Using your magic wand, (Mode- Add(shift); Match Mode- Color; tolerance- 20) and click inside each circle. Now go to selections- modify- expand by 3; Selections- invert and on the AA_Paper_2 layer, hit delete on your keyboard. Selections- none. All that should be left of the paper is what you see inside each circle. Now add a drop shadow to the frame.

 

Copy and paste AA_Element_28(Colored swirl clouds) as a new layer and move to bottom right corner.** Add drop shadow.

Copy and paste AA_Element_2(Black Unicorn) as a new layer. click on Image- flip horizontal, and move to the right to look like it is standing on cloud some.** Add drop shadow.

Copy and paste AA_Element_57(The unicorns made me do it word art) as a new layer and add drop shadow.

On top layer - Layers - New raster layer; selections, select all; selections, modify, contract by 6; selections, invert. Using flood tool pick a color from your banner. I chose a yellow (#fff6ac) Selections- none. Add drop shadow

Add proper copyright. url and Lic if required.
With just using a kit and this being a Facebook banner you would put
Kit "Attitude Adjustment" by Creative Scraps by Crys
Add name and your done.

This tutorial "The Unicorns Made Me Do It" was written by
Rebecca Albertson on 6/28/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"The Unicorns Made Me Do It" tut in the subject line.
Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

PTU kit Queen Beeatricw by Wicked Princess Scraps.  

Font of choice I used TheNauti Gal. 

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

WP_QB_FLOWERVINE8

WP_QB_BEECOUPLE - 50%

WP_QB_FLOWERSPRAY

WP_QB_FLOWER2

WP_QB_RIBBON 75%

WP_QB_CIRCLESFRAME

WP_QB_PP4

WP_QB_PP8

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start with New rastor image of 800x300

Use paper WP_QB_PP4 as a pattern and floodfill the layer.

Copy WP_QB_FLOWERSPRAY paste as new layer.

Add drop shadow. Move to top of tag.**

Duplicate image flip vertical move 

to bottom of banner.**

Copy WP_QB_FLOWERVINE8 paste as new layer.

Move to left and up a bit.** Add drop shadow.

Copy WP_QB_CIRCLESFRAME paste as new layer.

move to left of banner.** Add drop shadow.

Copy WP_QB_FLOWER2 paste as new layer.

move to bottom right** Add drop shadow

Copy WP_QB_RIBBON paste as new layer.

Move to bottom right over flowers.**

Add drop shadow. On Banner Selections 

all float defloat. 

Erase part of the vine and flower to left

of ribbon. 

Copy WP_QB_BEECOUPLE paste as new layer.

Move to left of banner. ** Add drop shadow.

Selections, all, float, defloat, modify,  

contract by 5, invert.

New layer use WP_QB_PP8 as pattern

floodfill, selections none.

Add drop shadow of 3, 3, 100, 11

Add another drop shadow of -3, -3, 100, 11.

Add proper copyright. url and Lic if required.

In this case I just used a kit. So the proper

copyright would be whatever the Designer has in their

TOU. ALWAYS read the TOU of a designers products.

Add name and your done.

Remember with Facebook Timelines you are no longer allowed to use the URL of the Artist.
AND also no long allowed to use the URL of the Designer if just using a kit.
Just give the proper credit for a facebook timeline banner.

This tutorial was written by Rebecca Townsley on 1/10/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Bee My Honey in the subject line

Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

PTU kit Ice Princess by Xoiya Creations. 

You can get it HERE. 

Font of choice I used Some Weatz Swashes. 

You can get it HERE.

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

Paper1

Lace

BowBorder

Bird2 - 40%

Cat* - 30%

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start with New rastor image of 600x250

Flood fill with any color and copy. 

Add proper/clear copyright and Lic.# (If Needed) 

Add your name and your done and copy.

Open Paper1 Paste the color image selections all 

float, defloat. Select the paper layer. copy and paste

on Signature as new layer.

Copy and paste Lace as new layer. Put at top of Sig.**

Copy and paste BowBorder as new layer. Place it at the bottom

of the lace just a bit.** Add drop shadow.

Copy and paste Bird2 as new layer. Move to the right 

of Sig and up. Almost like in the corner.** 

Add drop shadow.

Copy and paste the Cat* as new layer. and place it at bottom

left of the Sig.** Add drop shadow.

On background selections all float defloat, Contract by 7 

invert add new raster layer. Move to top. Flood fill with 

color from kit. Adjust Add/remove noise Add noise 100% 

Monochrome checked. Click ok add drop shadow.

Add proper copyright. url and Lic if required.

In this case I just used a kit. So the proper

copyright would be whatever the Designer has in their

TOU. ALWAYS read the TOU of a designers products.

Add name and your done.

For the Avitar. Using crop tool settings width 150 hight 150 

or if for facebook w 180 h 180. Gut it over the area 

of the sig you want as your avitar. Delete frame layer

url/cr/lic layer, Shorten name to the first letter.

on background selections all float defloat, Contract by 7 

invert add new raster layer. Move to top. Flood fill with 

color from kit. Adjust Add/remove noise Add noise 100% 

Monochrome checked. Click ok add drop shadow.

This tutorial was written by Rebecca Townsley on 12/28/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Natures Friends in the subject line

Can't wait to check them out!