Showing posts with label PicsforDesign. Show all posts
Showing posts with label PicsforDesign. Show all posts
Wednesday, June 1, 2022
Hello everyone! This is my first ever video tutorial. I am learning as I go with this one. There are no instructions as the video is pretty self explanatory. Next one I may or may not talk, have not gotten up the nerve for that yet. Looking for music I can use for them so it is not just plain silence. Any ideas on them for the future, feel free to leave in the comments here or on YouTube. Now, on to the details of what was used.
Kit used is by Wicked Princess Scraps called Mystical Moments. The kit has 71 elements, 7 frames, 10 papers, and 1 word art. You can get it at her store. Wicked Princess Scraps. Tube used is an exclusive at Pics For Design, from the Exclusive Club. Mask used is Mask 41 MB and SW by Moonbeams and Spiderwebs. Font used is Shelley Script at My
Sunday, April 10, 2022
These two tags were made using one of Wicked Princess Scraps
Image Based Kits she has at CDO. This kit is called Marika-67-2
With 20 elements, 6 papers, 2 frames, and 1 word art,
There are many possibilities!
You can grab the kit at CDO!
Tuesday, September 18, 2018
This wonderful Autumn kit called Painted Leaves by Freeks Creations has 82 Elements and 14 Papers! So much that you can make a multitude of tags with it. As you can see above, I have these two tags made with her kit. You can get this kit at the following stores!
For more of her products also check out those stores, her other stores, and her blog!
Dances in the Rain Scraps
Freeks Creations
Dances in the Rain Scraps
Freeks Creations
Wednesday, August 1, 2018
This tut was made using PSPx7.
And knowledge of PSPx7.
Supplies needed
PTU kit "Fantasy Forest" by "Freeks Creations". You can get it at the following stores.
And knowledge of PSPx7.
Supplies needed
PTU kit "Fantasy Forest" by "Freeks Creations". You can get it at the following stores.
Mystical Scraps
Scraps and Company
Dance in the Rain Scraps
Tube of choice, I used "Hedgies in Love" by "Laguna".
You can get it at Pics For Design.
Mask "Sparkle Floral Mask 2017 LNL" by "Leather and Lace Ads".
Font of choice. I used "Country Side" by Billy Argel.
This is a personal use only font.
Scraps and Company
Dance in the Rain Scraps
Tube of choice, I used "Hedgies in Love" by "Laguna".
You can get it at Pics For Design.
Mask "Sparkle Floral Mask 2017 LNL" by "Leather and Lace Ads".
Font of choice. I used "Country Side" by Billy Argel.
This is a personal use only font.
Must contact designer for Commercial Use.
You can get font at Font Space.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Paper5- 75%
Splash
Path
Swing
Vines- 60%
Mushroom- 30%
Mushroom2- 20%
Fairy- 50%
Tube- Resize to fit
Light
Glitter
Wordart
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600x600.
Copy and paste Paper5 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group.
Copy and paste Splash as new layer.
Copy and paste Path as new layer. Move down just a tad.**
Copy and paste Swing as new layer. Move to the right just a tad.**
Add a drop shadow.**
Copy and paste Vines as new layer. Image- Flip- Horizontal.
Move to in front of the swing.**
Add a drop shadow.
Copy and paste Mushroom as new layer.
Move to bottom right in front of vines a tad.**
Add a drop shadow.
Copy and paste Mushroom2 as new layer.
Move to bottom right of first mushroom.**
Add a drop shadow.
Copy and paste Fairy as new layer. Move to left of mushrooms a bit.**
Add a drop shadow.
Copy and paste Light as new layer. Move to left of tag.**
Copy and paste Tube as new layer. Move it to the bottom left of tag.**
Copy and paste Glitter as new layer.
Copy and paste Wordart as new layer. Move to bottom of tag.**
Add a drop shadow of 2.2.100.6.
Add proper copyright. url and Lic if required.
Add name and your done. With the name on this one I used a color from the kit with a white outline stroke of 1. and add a drop shadow of 2.2.100.6
This tutorial "Hedge Hog Magik Love" was written by Rebecca Albertson on 8/1/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Hedge Hog Magik Love" tut in the subject line.
Can't wait to check them out!
You can get font at Font Space.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Paper5- 75%
Splash
Path
Swing
Vines- 60%
Mushroom- 30%
Mushroom2- 20%
Fairy- 50%
Tube- Resize to fit
Light
Glitter
Wordart
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600x600.
Copy and paste Paper5 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group.
Copy and paste Splash as new layer.
Copy and paste Path as new layer. Move down just a tad.**
Copy and paste Swing as new layer. Move to the right just a tad.**
Add a drop shadow.**
Copy and paste Vines as new layer. Image- Flip- Horizontal.
Move to in front of the swing.**
Add a drop shadow.
Copy and paste Mushroom as new layer.
Move to bottom right in front of vines a tad.**
Add a drop shadow.
Copy and paste Mushroom2 as new layer.
Move to bottom right of first mushroom.**
Add a drop shadow.
Copy and paste Fairy as new layer. Move to left of mushrooms a bit.**
Add a drop shadow.
Copy and paste Light as new layer. Move to left of tag.**
Copy and paste Tube as new layer. Move it to the bottom left of tag.**
Copy and paste Glitter as new layer.
Copy and paste Wordart as new layer. Move to bottom of tag.**
Add a drop shadow of 2.2.100.6.
Add proper copyright. url and Lic if required.
Add name and your done. With the name on this one I used a color from the kit with a white outline stroke of 1. and add a drop shadow of 2.2.100.6
This tutorial "Hedge Hog Magik Love" was written by Rebecca Albertson on 8/1/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Hedge Hog Magik Love" tut in the subject line.
Can't wait to check them out!
Thursday, January 15, 2015
Using Winter Woods by
Tasha's Playground
You can see where to get her kit
from on her blog HERE.
Snags are below.
Saturday, October 4, 2014
Monday, August 18, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Zebrush.
This particular one is an Exclusive.
You need a license to use his work. You can get it
and his work here at Pics For Design.
PTU kit Birthstone Series Peridot by Tasha's Playground.
Mask of choice. I used MB and SW Mask 5 by Moonbeams and Spiderwebs.
Font of choice. I used SF Burlington Script.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
MB and SW Mask 05
TP_BP_paper05 - 75%
TP_BP_frame02
tube - resize to fit
TP_BP_e23 - 80%
TP_BP_e27
TP_BP_e13
TP_BP_e30 - 70%
TP_BP_e01 - 70%
TP_BP_e10
TP_BP_e20
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste TP_BP_paper05 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste TP_BP_frame02 as new layer. Add drop shadow.
Copy and paste TP_BP_e23 as new layer. Move to right of tag.**
Add drop shadow.
Copy and paste TP_BP_e27 as new layer. Images Flip Horizontal.
Move to left of tag.** Add drop shadow.
Copy and paste TP_BP_e13 as new layer. Move to bottom of tag.**
Add drop shadow.
Copy and paste TP_BP_e30 as new layer. Move to bottom left of tag.**
Add drop shadow.
Copy and paste TP_BP_e01 as new layer. Move to top left of tag.**
Add drop shadow.
Copy and paste TP_BP_e10 as new layer. Add drop shadow.
Copy and paste TP_BP_e20 as new layer.
Copy and paste tube as new layer. Move to bottom layer. Add drop shadow.
Selections, all, float, defloat. Use eraser tools on frame, and bow layers.
Selections none, erase any overhang from bottom.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 8/18/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Fresh Peridot in the subject line
Can't wait to check them out!
Tuesday, July 29, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Zlata M.
You need a license to use his work. You can get it
and his work here at Pics for Design.
PTU kit Dragon Magick by Rissa's Designs.
Mask of choice. I used BD Mask_15 by Designz by BabyDragon.
Font of choice. I used French Script MT.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
RD_DM_Paper06 - 75%
DBD Mask_15
TUbe resize to Fit
RD_DM_Grass
RD_DM_Tree
RD_DM_Rocks - 50%
RD_DM_Dragon02 - 40%
RD_DM_Castle
RD_DM_MagickDust
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste RD_DM_Paper06 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste tube as new layer. Move to left a bit.**
Add drop shadow.
Copy and paste RD_DM_Grass as new layer.
Copy and paste RD_DM_Tree as new layer. Move to right of grass.**
Copy and paste RD_DM_Rocks as new layer. Move to bottom and left a bit.**
Add drop shadow. Duplicate Images Flip Horizontalm, resize by 75%
Move to right and behind the first rocks.
Copy and paste RD_DM_Dragon02 as new layer. Move him to over the
bigger rocks.** Add drop shadow.
Copy and paste RD_DM_Castle as new layer, Move to left of tag
and place behind tube layer.** Add drop shadow.
Copy and paste RD_DM_MagickDust as new layer. Images Flip Horizontal.**
Make top layer.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/29/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Dragons Magick in the subject line
Can't wait to check them out!
Wednesday, July 16, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Alex Prihodko.
You need a license to use his work. You can get it
and his work here at Pics for Design.
PTU kit Lemon Verbina by Irish Princess Designs.
Mask of choice. I used MB and SW Mask 5 by Moonbeans and Spiderwebs.
Font of choice. I used LaDanse.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
MB and SW Mask 5
IPD_LV_Paper8 - 60%
IPD_LV_Sparkles
IPD_LV_Frame
tube - 40% or resize to fit
IPD_LV_Lanturn1 - 85%
IPD_LV_Mushroom
IPD_LV_TallFlower - 85%
IPD_LV_Leaves
IPD_LV_LongBranch - 85%
IPD_LV_FlowerTrio - 40%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste IPD_LV_Paper8 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste IPD_LV_Sparkles as new layer.
Copy and paste IPD_LV_Frame as new layer.
Add drop Shadow.
Copy and paste tube as new layer. Add drop shadow. Move to behind
frame layer. Selections all, float, defloat. On frame layer erase
where the tube head is to look like it is coming out f the frame.
Selections none. Erase bottom of tube over hang.
Copy and paste IPD_LV_Lanturn1 as new layer. Move to right side
of the tag.** Add drop Shadow.
Copy and paste IPD_LV_Mushroom as new layer. Move to in front of
the lanturn.** Add rop shadow.
Copy and paste IPD_LV_TallFlower as new layer. Move to left of
tag.** Add drop shadow.
Copy and paste IPD_LV_Leaves. Move to bottom of tag.**
Add drop shadow.
Copy and paste IPD_LV_LongBranch as new layer. Move to bottom of
tag. Images, flip horizontal.** Add drop shadow.
Copy and paste IPD_LV_FlowerTrio as new layer. Move to bottom left
of tag.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/16/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Lemon Verbina in the subject line
Can't wait to check them out!
Tuesday, June 3, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Alex Prihodko.
You need a license to use his work. You can get it
and his work here at Pics For Design.
PTU kit Peppermint Twist by Rissa's Designs.
Font of choice. I used AdineKirnberg.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
RD_PT_Paper10
RD_PT_Paper02
RD_PT_Swirl
RD_PT_ChristmasGnome - 50%
RD_PT_Cupcake
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 854 x 319.
Copy and paste RD_PT_Paper10 as new layer. Move to the right
Duplicate Move to left to look like it is joined. Adjust Gaussian blur
radius 15.
Copy and paste RD_PT_Paper02 as new layer. Move to the right
Duplicate Move to left to look like it is joined. Blend Lighten.
Copy and paste RD_PT_Swirl as new layer. Images Flip horizontal.
Move to the left of banner.** Add drop shadow.
Copy and paste tube as new layer and move to right of banner.** Blend luminance.
Duplicate blend hardlight. Add drop shadow. Duplicate adjust gaussian
blur radius 15.
Copy and paste RD_PT_ChristmasGnome as new layer. Move to bottom left of tube.**
Add drop shadow.
Copy and paste RD_PT_Cupcake as new layer. Move to bottom left of banner.**
Add drop shadow.
Layers - New raster layer, Selections all, modify, contract by 3, invert.
Flood fill color of choice. Duplicate Adjust Gaussian blur radius 15.
Add proper copyright. url and Lic if required.
Since this was done for facebook URL has been left off per Facebook rules.
Add name and your done.
For Avitar I hit shift+D to duplicate it, using crop tool set to 180x180 pixals
and croped what part of the banner I wanted as avitar.
Layers - New raster layer, Selections all, modify, contract by 3, invert.
Flood fill color of choice. Duplicate Adjust Gaussian blur radius 15.
This tutorial was written by Rebecca Townsley on 6/03/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Wonderfully Sexy in the subject line
Can't wait to check them out!
Friday, January 17, 2014
I would like to thank Julie aka Bits N Bobs for letting me work
with her wonderful new tube Cupid's Bow!
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Bits N Bobs.
You need a license to use her work. You can get it
and her work here at Pics for Design.
FTU kit Love by Kittz (9th one down)and can be gotten at the Creative Misfits Blog.
Mask of choice. I used Forum Mask 14 MB and SW by Moonbeams and Spiderwebs.
Font of choice. I used Times New Romance.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
LP24
Forum Mask 14 MB and SW
Love Corner Border
Love Cluster Flower
Tube
Love Birds - 30%
Love Dragonfly - 20%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 250 for the Banner
Copy and paste LP24 as new layer. New layer Flood fill color from tube.
Layers, New Mask layer. Find the mask in the list Click ok. Merge group
Copy and paste Love Corner Border as new layer. Move down a bit.**
Add Drop shadow.
Copy and paste Love Cluster Flower as new layer. Move to bottom right.**
Add drop shadow.
Were gonna make a shadow box. :)
Using Selection Tools Rectangle Make a rectangle. You can look at tag above
to get a good idea on the size. Copy and paste tube as new layer. Resize by
85%. Move to where you see her head in the rectangle. Selections invert, Delete.
invert again. Add new layer move to under the tube layer add drop shadow of
0,0,100,15 Selections none. Add drop the usual drop shadow to tube. Merge the
tube and the shadow box together. Images, Flip Horizontal move to top right of banner.**
Duplicate resize by 75% Images, Flip Horizontal move to bottom left of banner.**
Copy and paste tube as new layer. Resize by 50%.
I have her placed in the center of the banner.**
Add drop shadow.
Copy and paste Love Birds as new layer. Move to bottom right of banner.**
Add Drop shadow.
Copy and paste Love Dragonfly as new layer. Move to top left of banner.**
Add drop shadow. Duplicate, resize by 85% Images, Flip Horizontal move down
and to the right a bit.**
New Layer Selections all Modify Contract by 3 Invert floodfill with color of choice.
I used black. Selections none. Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
For the Avatar
Shift + D to duplicate the Banner you just made.
On the Duplicate...I used crop tool settings 150 x 150
Set it to the upper left of the banner. Deleted the Frame, copyright info, and
shadow box tube layers. Merged Visable, new layer Selections all modify Contract
by 3 Invert Flood fill with same color as Banner frame. Selections none. Add Name
or Initial.
This tutorial was written by Rebecca Townsley on 1/17/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Cupids Bow in the subject line
Can't wait to check them out!
Thursday, May 16, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Alex Prihodko.
You need a license to use his work. You can get it
and his work at Pics For Design.
PTU kit Daisies and Daffies by Scrappin Krazy Designs.
Mask MB and SW Mask 40 from Moonbeams and Spiderwebs.
Font of choice I used AdineKirnberg.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 35%
ele08
ele11
ele44
ele07
ele60
ele09 - 60%
ele12 - 40%
p11
MB and SW Mask 40
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste ele08 as new layer.
Add drop shadow.
Copy and paste ele11 as new layer
Copy and paste ele44 as new layer.
May have to move down just a tad.**
Add drop shadow.
Copy and paste tube as new layer.
Move down a tad.** Add drop shadow.
Copy and paste ele07 as new layer.
Move to just over bottom of tube.**
Duplicte, merge down, duplicate, merge down.
Copy and paste ele60 as new layer.
Add drop shadow.
Copy and paste ele12 as new layer. Move to
upper left of tag, duplicate, image, flip
horizontal, move over to right of tag and down
a tad.** Add drop shadows to both.
Copy and paste p11 as new layer.
Move to bottom layer. Layers, new mask layer,
from image, find mask in the list, click ok
merge group.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 5/16/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spring Hunk in the subject line.
Can't wait to check them out!
Tuesday, April 23, 2013
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Alex Prihodko.
You need a license to use his work.
You can get it and his work at Pics For Design.
PTU kit Faery Lights by Irish Princess Designs.
Font of choice I used Bu Glenda.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Tube resize to fit
IBD_FL_Paper7
IBD_FL_Swirly
IBD_FL_PinkFaeryLights
IBD_FL_FlowerScatter
IBD_FL_Faery 25%
IBD_FL_FaeryLights
IBD_FL_Vines1
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x250.
Copy and paste IBD_FL_Paper7 as new layer.
Copy and paste IBD_FL_Swirly as new layer.
Move a bit to the right and down.**
Add drop shadow 0.0.75.8
Copy and paste IBD_FL_PinkFaeryLights as new layer.
Copy and paste IBD_FL_FlowerScatter as new layer.
Copy and paste IBD_FL_Faery as new layer.
Move he to right. And place her to look like she
is sitting on the swirly. Add drop shadow 1.1.75.8
Copy and paste IBD_FL_FaeryLights as new layer.
Copy and paste tube as new layer. Image, Flip Horizontal.
Move to left of Sig.** Add drop shadow.
Copy and paste IBD_FL_Vines1 as new layer.
Move to the top left. You will see some of it
on side and top hanging over.** Add drop shadow. 0.0.75.8
On bottom layer Selections all, Add new layer move layer
to the top layer. Selections contract by 5, Invert.
Flood fill with color from tube. Adjust, Add remove noise,
Gaussian, 41% Monochrome checked. click ok.
Add drop shadow. 0.0.75.8
Add proper copyright. url and Lic if required.
Add name Inner Bevel, Bevel 2, width 8
Smoothness 100, Depth 16, Ambience 15, Shineness 35
color (grey), Angle 195, Intensity 40,
Elevations 44. Add drop shadow settings 2.2.100.7
Save your tag before moving onto the Avitar!
For the Avitar. Delete the frame and name.
I used crop tool. Put settings at 150x150.
Moved the square over to what I wanted to show in the avi.
Click the check or hit enter. Merge layers.
Add new layer move layer to the top layer.
Selections all, Selections contract by 5, Invert.
Flood fill with color from tube. Adjust, Add remove noise,
Gaussian, 41% Monochrome checked. click ok.
Add drop shadow. 0.0.75.8
Add proper copyright and Lic info and your initals or name.
Inner bevel same settings as before. Add drop shadow. 2.2.100.7
This tutorial was written by Rebecca Townsley on 4/23/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Faery Lights in the subject line
Can't wait to check them out!
Monday, March 25, 2013
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Verymany.
You need a license to use her work. You can get it
and her work at Pics For Design.
PTU kit Midnight Dream by Scrapping from the Heart.
UF Mask42 from Urban Fairytales .
Font of choice I used Bambino.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
SFTH_MidnightDream_stars - 75%
SFTH_MidnightDream_cloud - 75%
SFTH_MidnightDream_bench - 65%
Tube PFD - 39% or resize to fit
SFTH_MidnightDream_teddybear - 20%
SFTH_MidnightDream_Cherub - 35%
DS-2,2,50,10
SFTH_MidnightDream_Paper6
Urban Fairytales UF Mask42
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste SFTH_MidnightDream_stars as new layer.
Copy and paste SFTH_MidnightDream_cloud as new layer.
Move down close to bottom.**
Copy and paste SFTH_MidnightDream_bench as new layer.
Move to bottom a bit to look like it is on the cloud.
Add drop shadow.
Copy and paste Tube as new layer. Move to where it looks
it is infront of bench on the cloud.** Add drop shadow.
Copy and paste SFTH_MidnightDream_teddybear as new layer.
Move to foot of tube.** Add drop shadow.
Copy and paste SFTH_MidnightDream_Cherub as new layer.
Image, free rotate, 45 to the left. Place in upper left
of tag to look like it is flying.**
Add drop shadow of -2,2,50,10.
Copy and paste SFTH_MidnightDream_Paper6 as new layer.
Move to botom layer. Layers, new mask layer, from image.
Find the mask in the list clock ok Merge group.
Add what ever wording you wish if any.
Add proper copyright. url and Lic if required.
Add name drop shadow and your done.
This tutorial was written by Rebecca Townsley on 3/25/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Waiting for You in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)