Showing posts with label Wicked Princess Scraps. Show all posts
Showing posts with label Wicked Princess Scraps. Show all posts
Saturday, February 12, 2022

CT Tutorial *Mystik Dragon*

7:51 PM | By | Edit Post

 


This wonderful kit "Mystical Moments" has a total 71 elements, 10 papers, and 1 word art! Lots of magical pieces!!

This tut was made using PSP 2022 Ultimate.
And knowledge of PSP 2022 Ultimate.

Supplies needed

Tube of choice, I used "21-2-SybileArt" by "Sybile Art" at CDO.
PTU kit "Mystical Moments" by "Wicked Princess Scraps".
Mask "DBD Mask 25" by "Designz by BabyDragon".
Font of choice. I used "Rage Italic"at DaFont.

Most elements used are resized to fit where I needed them to go. Below is the
list of elements used and the percentage I resized them by. If there is no
percentage, the element was not resized. It may help if you go ahead and resize
each element.

WP-MYSTICALMOMENTS_KATHARINE_HEARTS - 75%
21-2-SybileArt tube - 50% resizing will depend on size of tube you use.
WP_MYSTICALMOMENTS_KATHARINE_DECO2
WP_MYSTICALMOMENTS_KATHARINE_FLOWER15 - 75%
WP_MYSTICALMOMENTS_KATHARINE_JAR - 50%
WP_MYSTICALMOMENTS_KATHARINE_CRYSTALBALL - 50%
WP_MYSTICALMOMENTS_KATHARINE_2 (Paper) - 75%
DBD Mask 25

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 Color Black unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600x600.

Copy and paste paper as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group

1.Copy and paste WP-MYSTICALMOMENTS_KATHARINE_HEARTS as new layer, add drop shadow
2.Copy and paste tube as new layer**. Add drop shadow.
3.Copy and Paste WP_MYSTICALMOMENTS_KATHARINE_DECO2 as new layer and move to above
mask layer.
4.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_FLOWER15 as new layer. Move to under
tube layer and add drop shadow.
5.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_JAR as new layer. Move to under hearts
layer**. Add drop shadow.
6.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_CRYSTALBALL as new layer**.
7.Add your wording and or name.

Add proper copyright. url and Lic if required.
With just using a kit and this being a Facebook banner you would put
Kit "Mystical Moments" by Wicked Princess Scraps
Add name and your done.

This tutorial "Mystik Dragon" was written by Rebecca Albertson on 02/12/22.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Mystik Dragon" tut in the subject line.
Can't wait to check them out!

Friday, October 8, 2021

"Get Out" tutorial using PSP 2022 Ultimate

3:28 PM | By | Edit Post

 

It has been awhile .. Like 3 years since I have done a tutorial. I was in online college going for my Bachelors in Science of Sociology with Emphasis in Social Work degree. I have since graduated and also been promoted at my job. I do however have time now to start doing some tuts. I am not on any CT teams at the moment. These are just random tuts of stuff I have. 

This tut was made using PSP 2022 Ultimate.
And knowledge of PSP 2022 Ultimate.
With Windows 10.

Supplies needed

Tube of choice, I used "Vinegar 7-1" by "Vinegar". You can get her at CDO.
FTU/PTU kit "The Hunt" by "Wicked Princess Scraps".
Mask "MB and SW Mask 129" by "Moonbeams and Spiderwebs".
Font of choice. I used "HalloWitchZ" from Dafont.

Most elements used are resized to fit where I needed them to go. Below is the
list of elements used and the percentage I resized them by. If there is no
percentage, the element was not resized. It may help if you go ahead and resize
each element.

Tube of Choice
WP_THT_FRAME8 - 60%
WP_THT_MESH - 60%
WP_THT_BLOODSPATTERS - 85%
WP_THT_TREE3 - 65%
WP_THT_WORDART2 - 45%
WP_THT_SKULL - 20%
WP_THT_PP6 - 76%

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 Color Black unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600  .

Copy and paste WP_THT_PP6 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group

1. Copy and paste WP_THT_FRAME8 as a new layer. Add drop shadow. 


2. Copy and paste tube as new layer. Move down to below the WP_THT_FRAME8
layer. Add drop shadow. 


3. On the tube, selections, select all, select float, select defloat. Now
click on thge frame layer and using the eraser tool to erase just the part
of the layer infront of the tube. Selections - Select none. Gives the tube
the look of coming out of the frame. 


4. Copy and paste WP_THT_MESH as new layer and move to below the tube layer.


5. Copy and paste the WP_THT_BLOODSPLATTEERS as a new layer. Change the
opacity to 59 and move to above the WP_THT_MESH layer.


6. Copy and paste WP_THT_TREE3 as new layer. Move to top layer above frame.**
Add drop shadow.


7. Copy and paste WP_THT_WORDART2 as new layer. Add drop shadow, change
color of shadow to white.** Once moved to top corner, duplicate layer,
then merge down.


8. Copy and paste WP_THT_SKULL as new layer. ** Add drop shadow.


9. Copy and paste WP_THT_PP6 as new layer. Move to bottom layer.
Layers, New Mask layer. Find the mask in the list Click ok. Merge group

Add proper copyright. url and Lic if required.
With just using a kit you would put Kit "The Hunt" by Wicked Princess Scraps
Add name and your done.

This tutorial "Get Out" was written by Rebecca Albertson on 10/8/21.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied but a link can be shared in groups
for challenges and what not.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Get Out" tut in the subject line.
Can't wait to check them out!

Thursday, October 23, 2014

CT Tut for The PSP Project *Zombie Birthday*

3:29 PM | By | Edit Post




This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used Zombie Birthday by Joahannah von Frankenstein.
You need a license to use her work. You can get it 
and her work here at The PSP Project.
Also Using the matching PTU kit Zombie Birthday by Wicked Princess Scraps.
Also available at The PSP Project.
Template of Choice. I used by Timeline Banner #2 made by ME Designz by BabyDragon.
Font of choice. I used ZOMBIFIED.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Timeline Banner Template #2
tube - 75%
WP_ZB_PP6
WP_ZB_PP5
WP_ZB_PP9 - 50%
WP_ZB_PP1
WP_ZB_CANDY3 - 30%
WP_ZB_HANDS1 
WP_ZB_GIFT1 - 20%
WP_ZB_GIFT2 - 20%
WP_ZB_BEAR - 40%
WP_ZB_CUPCAKE1 - 40%
WP_ZB_BOW - 75%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open the template and hit shift+d to duplicate.
Close original. Delete the Info layer and on the Avitar
spot change opacity to 25 for now so you can still see it
but under it as well. This will be deleted when done. 
Delete word layer.

Change forground to pattern using WP_ZB_PP6 and flood fill
Background layer.

Now chsnge pattern to WP_B_PP5 and flood fill layer 1.
Add drop shadow.

Merge Layer 5 down to 4 and merge that layer down as well 
so all three circles are on same layer. Selections all - Float 
defloat - invert.

Copy and paste WP_ZB_PP9 as new layer. Move to ovet the circles.
Delete, Selections none. Add drop shadow.

Change forground to pattern using WP_ZB_PP1 and flood fill
Layers 6 and 7. Add drop shadow.

Copy and paste Tube as new layer. Move to the right of template
and place as top layer. Add drop shadow.

On the balloon layers using Manual Color Correction change color 
of ballons to a color from the tube. Duplicate, Effects 3D, Cut out
Settings Offset Vertical 0 Horizontal 0 Opacity 100 Blur 36
Color a darker color then what the balloon is. Hit ok Merge down.
Add drop shadow to both.

Copy and paste WP_ZB_HANDS1 as new layer over the stripes layer.
Add drop shadow.

Copy and paste WP_ZB_BOW as new layer over the hands. Move down
a bit.** Add drop shadow.

Copy and paste WP_ZB_BEAR as new layer over the tube layer. Move
to the right of tag.** Add drop shadow.

Copy and paste WP_ZB_GIFT2 as new layer. Move to left of bear.**
Add drop shadow.

Copy and  WP_ZB_CUPCAKE1 as new layer and move just to the right of
the grey avi square.** Add drop shadow.

Copy and paste WP_ZB_GIFT1 as new layer and move to the right
of the cupcake.** Add drop shadow.

Copy and paste WP_ZB_CANDY3 as new layer. Move to just over the grey
avi square to look like it it sitting on top of it.** Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 10/23/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Zombie Birthday in the subject line
Can't wait to check them out!

Thursday, September 11, 2014

CT Tutorial for Wendy Gerber *Dia Delos Muertos*

8:32 AM | By | Edit Post



This tut was made using PSPx5.
And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use hers work. You can get it 
and her work here at Tubes 4 Taggers.
PTU kit The Vampire Seduction by Wicked Princess Designs.
You can get it at The PSP Project.
Mask of choice. I used Mask 43 MB and SW by Moonbeams and Spiderwebs.
Font of choice. I used Day of the Tentacle.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Mask 43 MB and SW
WP_VS_PP20 - 75%
WP_VS_CASTLE - 65%
WP_VS_TREE4 - 85%
WP_VS_FOILAGE - 85%
Tube - 65% or resize to fit
WP_VS_GRASS2 - 55%
WP_VS_CLOUD
WP_VS_CLOUD2 - 95%
WP_VS_WINGEDSKULL - 65%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste WP_VS_PP20 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste WP_VS_CASTLE as new layer. Move up and to the right
a bit.**

Copy and paste WP_VS_TREE4 as new layer. Move to the right.**

Copy and paste WP_VS_FOILAGE as new layer. Move to the left.**

Copy and paste tube as new layer. Move down or up a bit.**
Add drop shadow.

Copy and paste WP_VS_GRASS2 as new layer. Move down to bottom of
the tube.**

Copy and paste WP_VS_CLOUD as new layer. Move to over Grass layer.**

Copy and paste WP_VS_CLOUD2 as new layer. Move to over other cloud layer.**

Copy and paste WP_VS_WINGEDSKULL as new layer. Move to bottom of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 9/11/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Dia Delos Muertos in the subject line
Can't wait to check them out!

Sunday, August 10, 2014

CT Tut for Wendy Gerber *A Midnight Kiss*

7:13 PM | By | Edit Post



This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use her work. You can get it 
and her work here at Mystical Scraps.
PTU kit A Midnight Kiss by Wicked Princess Scraps.
Mask of choice. I used MB and SW Mask 23 by Moonbeams and Spiderwebs.
Font of choice. I used Motion Picture.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.


MB and SW Mask 23
WP_AMK_PP9 - 75%
WP_AMK_GLITTERYSPLAT
tube close up - 50%
WP_AMK_RECTANGLEFRAME - 75%
WP_AMK_ROSEBRANCH - 75%
WP_AMK_ROSENOTE - 40%
WP_AMK_HEARTDANGLE - 60%
WP_AMK_FAN - 40% 
WP_AMK_ROSESHOE - 30%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste WP_AMK_PP9 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste WP_AMK_GLITTERYSPLAT as new layer. Move to bottom right.**
Duplicate, Image, FLip Horizontal and move to top left.** Merge down.

Copy and paste tube close up as new layer. Add drop shadow.

Copy and paste WP_AMK_RECTANGLEFRAME as new layer. Erase any over hang
from tube.

Copy and paste WP_AMK_ROSEBRANCH as new layer. Move to left of frame.** 

Copy and paste WP_AMK_ROSENOTE as new layer. Move to bottom left of tag.**
Add drop shadow.

Copy and paste WP_AMK_HEARTDANGLE as new layer. Move to top right of tag.**
Add drop shadow.

Copy and paste WP_AMK_FAN as newlayer. Image Free rotate 25 to the right.
Move to top right of frame.** Add drop shadow.

Copy and paste WP_AMK_ROSESHOE as new layer. Move to bottom right of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 8/10/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
A Midnight Kiss in the subject line
Can't wait to check them out!

Thursday, July 24, 2014

CT Tut Devine Animation

1:31 PM | By | Edit Post


This tut was made using PSPx4 and Animation shop.
And knowledge of PSPx4 and Animation Shop.

Supplies needed 

Tube of choice. I used one by Elias Chatzoudis.
You need a license to use his work. You can get it 
and hhis work here at Elias Art Shop.
PTU kit I am Devine by Wicked Princess Scraps.
Can get it at The PSP Project.
Animation used Candle Flames by Scrappy Bit of Fun.
Mask of choice. I used DBV Mask 15 by Designs b Vaybs.
Font of choice. I used Motion Picture.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.


DBV Mask 15
WP_IAD_PP7
WP_IAD_FLOWER1 - 90% 
WP_IAD_FRAME1 - 75%
Tube Close up Resized to fit
WP_IAD_VIOLIN - 65%
WP_IAD_BIRD - 25%
WP_IAD_FLOWER4 - 75%
WP_IAD_CANDLES


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. Flood fill white.

Copy and paste WP_IAD_PP7 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste WP_IAD_FLOWER1 as new layer. Images Flip Horizontal.
Add drop Shadow.

Copy and paste WP_IAD_FRAME1 as new layer. Add drop shadow.

Copy and paste. tube as new layer. Move behind frame layer.
Add drop shadow. On tube layer selections all float defloat. 
On frame layer erase parts of frame so it looks like the tube
is coming out of the frame. Selections none. Erase any tube 
overhang.

Copy and paste WP_IAD_VIOLIN as new layer. Move to bottom right
of tag.** Add drop shadow.

Copy and paste WP_IAD_BIRD as new layer. Move to top left of the
tag.** Add drop shadow.

Copy and paste WP_IAD_FLOWER4 as new layer. Move to left of tag.**
Add drop shadow.

Copy and paste WP_IAD_CANDLES as new layers. Using pick tool resize
to a smaller size. Move to bottom right of tag.** Duplcate using pick
tool resize it to a different size. Repeat. Place them kinda of infront 
of each other kinda zig zag.** Add drop shadow. 

Add copyright info. Merge layers.Now for the Animation. 

Open animation shop. 

File Open new find the candle flames and open them.
Edit Select All. 

In PSP copy the layers and then paste as new
animation in AS. Edit Duplicate selected till you 
have same amount of frames as the candle flame.
Edit Select all. 

Now take the flame from frame 1 amd move to over the flame
on frame one on one of the candles. Go back to candle frames and 
hit undo you will see them reapear. Repeat for the other two falmes.

Back in PSP put your name on the tag add drop shadow. Copy and paste 
as new layer. Copy that and past as new layer in AS. Edit Duplicate 
selected till you have same amount of frames as your tag. Repeat same
process for your name as you did for the flames. 

Save it and you are done.

This tutorial was written by Rebecca Townsley on 7/24/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Devine in the subject line.
Can't wait to check them out!



Tuesday, July 22, 2014

CT USA

7:31 AM | By | Edit Post


This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Kiwi Fire Storm.
You need a license to use his work. You can get it 
and his work here at The PSP Project.
FTU kit Fourth of July by Wicked Princess Scraps.
Template of Choice. I used by .
Mask of choice. I used Mask 62 by Millies PSP Madness.
Font of choice. I used Ravie. 

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.


Mask 62
WP_FOJ_PP2 - 75%
WP_FOJ_FLAG1 
WP_FOJ_BURST - 95%
WP_FOJ_STAR2 - 95%
Tube - 65% or resize to fit
WP_FOJ_WORDART - 75%
WP_FOJ_BIRD - 30%
WP_FOJ_CHAIN - 75%
WP_FOJ_FIRECRACKER - 50%
WP_FOJ_FLAGS - 60%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste WP_FOJ_PP2 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste WP_FOJ_FLAG1 as new layer. Move up a bit.**
Add drop shadow.

Copy and paste WP_FOJ_BURST as new layer. Add drop shadow.

Copy and paste WP_FOJ_STAR2 as new layer.

Copy and paste tube as new layer. Add drop Shadow.

Copy and paste WP_FOJ_WORDART as new layer. Move down to
bottom of tag.** Add drop shadow.

Copy and paste WP_FOJ_BIRD as new layer. Move to the top 
left of the USA.** Add drop shadow.

Copy and paste WP_FOJ_CHAIN as new layer. Move to the 
top right of the USA.** Add drop shadow.

Copy and paste WP_FOJ_FIRECRACKER as new layer. Move to bottom
right of the USA.** Add drop shadow.

Copy and paste WP_FOJ_FLAGS and move to top of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 7/22/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
USA in the subject line
Can't wait to check them out!

Tuesday, August 20, 2013

FTU Melancholy Love

8:33 PM | By | Edit Post

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by ZlataM.
You need a license to use his work. You can get it 
and his work at The PSP Project.
http://www.thepspproject.com/
FTU kit Melancholy Love by Wicked Princess Scraps.
http://wickedprincessscraps.blogspot.com/2011/10/freebie-alert-5-former-ptu-now-ftu.html
Mask of Choice I used Mask 418 by Insatiable Dreams.
You can get it Here.
http://insatiabledreams.net/Cat_s_Masks_too.html
Font of choice I used Riesling.
http://www.dafont.com/riesling.font

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

WP_ML_PP1 - 75%
Mask 418 Insatiable Dreams 
WP_ML_Flower 
WP_ML_BARBEDWIREHEART - 80%
WP_ML_GLITTERSWIRL MBH HEART
Tube - 60% or resize to fit
WP_ML_LEIFLOWER - 35% 
WP_ML_POCKETWATCH - 85% 
WP_ML_DOODLEFLOWER - 50%
WP_ML_PANSYVINE - 50%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste WP_ML_PP1 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste WP_ML_BARBEDWIREHEART as new layer.
Add drop shadow.

Copy and paste WP_ML_Flower as new layer. Move to the left
a bit.** Aff drop shadow. 

Copy and paste WP_ML_GLITTERSWIRL as new layer. Move behind
the Barbed wire heart up and to left a bit.**
Add drop shadow.

Copy and paste tube as new layer. Move to the left
of the heart a bit.** Add drop shadow.

Copy and paste WP_ML_LEIFLOWER as new layer. Move to left and down.
Add drop shadow. Duplicate, Image, flip Horizontal, move to the
Right.** Then make it the layer above the first one.

Copy and paste WP_ML_POCKETWATCH as new layer. Flip Horizontal Move 
down and place it between the two Leiflowers.** Add drop shadow.

Copy and paste WP_ML_DOODLEFLOWER as new layer. Move to where it is
center and up a bit of the Leiflowers.** Add drop shadow.

Copy and paste WP_ML_PANSYVINE as new layer. Move to bottom of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/20/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Melancholy Love in the subject line.
Can't wait to check them out!


Sunday, July 7, 2013

Dark Angel Fae

7:27 PM | By | Edit Post


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Scott Koznar.
You need a license to use his work. You can get it 
and his work at The PSP Project.
FTU kit Dark Angel by Wicked Princess Scraps.
Mask of Choice I used Mask 42 MB and SW from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used TheNautiGal.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

WP_DA_PP3
Mask 42 MB and SW
WP_DA_DRAPERY
WP_DA_SMOKE - 75%
WP_DA_WRAPFRAME
WP_DA_GLITTERHEARTSPALTTER
WP_DA_BUGGLOBE - 50%
WP_DA_BARBEDHEARTWING - 50%
WP_DA_CROSS2 - 50%
Tube - 75%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste WP_DA_PP3 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste WP_DA_DRAPERY as new layer.
Add drop shadow.

Copy and paste WP_DA_SMOKE as new layer. May have to move
down some. 

Copy and paste WP_DA_WRAPFRAME as new layer. 
Add drop shadow.

Copy and paste WP_DA_GLITTERHEARTSPALTTER as new layer.
Add drop shadow.

Copy and paste WP_DA_BUGGLOBE as new layer. Move to the
top right to look like it is hanging fromt he curtain rod.**
Add drop shadow.

Copy and paste WP_DA_BARBEDHEARTWING as new layer. Move to 
bottom right of tag.** Add drop shadow

Copy and paste WP_DA_CROSS2 as new layer. Move to bottom
right and behind the heart.** Add drop shadow.

Copy and paste tube as new layer. Move to the left of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 7/07/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Dark Angel Fae in the subject line.
Can't wait to check them out!

Subscribe to: Posts (Atom)

Blogger Template created with Artisteer by .