Showing posts with label Tony T. Show all posts
Showing posts with label Tony T. Show all posts
Tuesday, March 26, 2013
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice is an Exclusive tube Aphrodite by Tony T.
You will need TPP Lic to use this tube.
Only at The PSP Project.
PTU kit Greek Goddess by Tasha's Playground.
Made to compliment the Tony Tube Aphrodite.
Exclusively to The PSP Project
Font of choice I used Amaze.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 75% depending on tube used
heart swirl
gold dust
columns
lyre - 50%
mist
strand
path - 85%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste gold dust as new layer. Make bottom layer.
Move up to top of tag.** Duplicate and move that one to bottom
of tag.**
Copy and paste Heart Swirls as new layer. Add drop shadow.
Copy and paste columns as new layer. Move to behind the tube.**
Add drop shadow.
Copy and paste tube as new layer. Add drop shadow.
Copy and paste lyre as new layer. Move to bottom judt by the
tube and columns. Using pick tool rotate slightly to left.**
Add drop shadow.
Copy and paste mist as new layer. Move to bottom of tag.**
Copy and paste strand as new layer. Move to bottom of tag.**
Add drop shadow.
Copy and paste path as new layer. Move to bottom.** To look
like she and the columns are standing on it. Add drop shadow.
Add proper copyright. url and Lic if required.
Add name drop shadow and your done.
This tutorial was written by Rebecca Townsley on 3/27/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Goddess of Love in the subject line.
Can't wait to check them out!
Tuesday, October 23, 2012
This tut was made using PSPx
And knowledge of PSPx5.
Supplies needed
PTU Kit Tropical Peach by Scrappin Krazy Designs HERE.
Tube of Choice one with a close up. I am using Tony Tzanoukakis.
You need a lic to use his work. You can get it and his work HERE.
Mask used Mask 43 MB and SW from MoonBeams and Spiderwebs.
You can get it HERE.
Font of choice I used Sloop . You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Startoff with a new image 600x600
Open ele19 copy and paste as new layer.
Open p14 resize by 75% Using magic wand click inside the frame.
Selections - Expand by 4 Selections invert.
On the paper layer Delete. Selections none.
Open ele23 copy and paste as new layer. Move to bottom right
of frame** add drop shadow.
Open ele37 copy and paste as new layer. Move to bottom right
of frame** add drop shadow.
Open ele44 copy and paste as new layer. Place under the frame layer
and to the bottom of tag.** Add drop shadow.
Open ele51 resize by 50% copy and paste as new layer on top move to
right of tag over the flowers.** Add drop shadow.
Open ele56 resize by 75% copy and paste as new layer. Image -
Flip horizontal move to top left of frame.** Add drop shadow.
Open ele16 copy and paste as new layer. Move to above paper layer.
Add a drop shadow to the frame. Open tube the one I used did not
need to resize it. It was the perfect size for how was used.
Copy and paste the tube as new layer. I moved it to where the face
was main veiw of frame and placed under the frame layer.Duplicate
Blend hard light. Merge down. Add droop shadow. Using eraser tool
erase any over hang from under the frame.
Open p04 copy and paste as new layer move to bottomlayer.
Open mask - layers, new mask layer from image Find the mask
in the kist click ok merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
This tutorial was written by Rebecca Townsley on 10/23/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Pretty In Peach Result in the subject line
Can't wait to check them out!
Friday, October 5, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU Kit Fall Time by Disenando Scraps HERE.
Tube of Choice. I am using Tony Tzanoukakis.
You need a lic to use his work. You can get his work HERE.
Font of choice I used Amazone BT.You can get it HERE.
Mask used Mask 42 from Moonbeams and spiderwebs. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new rastor layer 600x600
Open falltimeframeribbon4 resize by 70%
copy and paste as new layer.
Add drop shadow.
Open falltimefantscroll resize by 75% Copy and paste
as new layer and move behind the frame and to the left a bit.**
Add drop shadow.
Open tube copy and paste as new layer.
Add drop shadow. Should not have to move it any
but if so it should be center of tag.
Open falltimebutterfly resize by 20% copy and paste
as new layer. Place over the hand of tube. **
add drop shadow.
Open falltimeflowerss resize by 65% copy and paste
as new layer. Move to bottom of tag.**
Add drop shadow.
Open falltimesunflower resize by 15% copy and paste
as new layer. Move to bottom and to left of the flowers a bit.**
Add drop shadow. Duplicate move over to right and down a bit.**
Open falltimehallo copy and paste as new layer.
Open falltimessleaves resize by 10% copy and paste as new layer.
Using pick tool rotate it a bit and place anywhere in the hallo
to look like it is flying in the wind. Add drop shadow.
Duplicate rotate a bit more and move to another spot.
Repeat above steps with falltimesleaves2 and falltimesleaves3.
Move the hallo to above the leaves.
Open falltimepaper resize by 75% copy and paste
as new layer and move to bottom layer.
Open mask - layers - new mask layer - from image.
Find the mask in the list click ok merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
This tutorial was written by Rebecca Townsley on 10/5/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Autumn Winds Result in the subject line
Can't wait to check them out!
Saturday, January 21, 2012
This tut was made using PSPx2
And knowledge of PSPx2.
Supplies needed
PTU Sorrowful You from Tasha's Playground HERE.
Tube of Choice. I used Tony Tzanoukakis.
You need a lic to use his work. You can get it and his work at
his store HERE.
Template 43 from Blissfully Beth. You can get it HERE.
Font Of Choice I used Jellyka Waterways Seafaers. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open the template and duplicate it by hitting Shift+D
Close original. Delete the url info layer.
CLick on O Frame background - selections - select all -
float - deflaot - invert
Open paper7 resize by 85% copy and paste as new layer. Delete. Selections None.
Delete original layer.
Merge Stripe layer 1, 2, and 3 together.
Using magic wand Mode - Add(shift) MAtch mode RGB Value
Click inside each of the Stripes you just merged.
Open paper2 Resize by 85% Copy and paste as new layer
Selections - Invert - Delete Selections None
On Original Stripe layer Selections - All - Float -
Defloat Selections none. Flood fill with color from tube.
Add drop shadow I used white in this one.
Adjust Add/Remove Noise - Add noise - Uniform 50% Monochrome Checked
Add Drop shadow
Click on O frame Selections - All - float - defloat -
Flood fill with a light color from tube
Adjust Add/Remove Noise - Add noise - Uniform 50% Monochrome Checked
Add Drop shadow
Click on Black Stripes layer
Adjust Add/Remove Noise - Add noise - Uniform 50% Monochrome Checked
Add Drop shadow
Copy and paste tube under your O background layer. Place to where it
looks like its coming out of the O.** Selections All - float - defloat.
Use eraser and erase the part of the O Background and O frame
where tube is coming out of. Add Drop shadow to tube.
Open wings copy and paste as new layer move to under black stripes and slighty to top
of template.** Add drop shadow.
Open sparkles copy and paste as new layer on top. Move slightly to bottom left.
Duplicate - image - mirror. Merge down. Duplicate - Image - flip Merge down.
Open spider copy and paste as new layer move to bottom left of tag **
and then move to below the sparkle layer.
Resize all layers by 96%
Add proper/clear copyright and Lic.# (If Needed)
Add name and drop shadow.
(fell free to play around with the name to make it how you would like it.)
This tutorial was written by Rebecca Townsley on 1/21/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Black Widow Tut Result in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)