Hello everyone! This is my first ever video tutorial. I am learning as I go with this one. There are no instructions as the video is pretty self explanatory. Next one I may or may not talk, have not gotten up the nerve for that yet. Looking for music I can use for them so it is not just plain silence. Any ideas on them for the future, feel free to leave in the comments here or on YouTube. Now, on to the details of what was used.
Kit used is by Wicked Princess Scraps called Mystical Moments. The kit has 71 elements, 7 frames, 10 papers, and 1 word art. You can get it at her store. Wicked Princess Scraps. Tube used is an exclusive at Pics For Design, from the Exclusive Club. Mask used is Mask 41 MB and SW by Moonbeams and Spiderwebs. Font used is Shelley Script at My
These two tags were made using one of Wicked Princess Scraps
Image Based Kits she has at CDO. This kit is called Marika-67-2
With 20 elements, 6 papers, 2 frames, and 1 word art,
There are many possibilities!
You can grab the kit at CDO!
This wonderful kit "Mystical Moments" has a total 71 elements, 10 papers, and 1 word art! Lots of magical pieces!!
This tut was made using PSP 2022 Ultimate.
And knowledge of PSP 2022 Ultimate.
Supplies needed
Tube of choice, I used "21-2-SybileArt" by "Sybile Art" at CDO.
PTU kit "Mystical Moments" by "Wicked Princess Scraps".
Mask "DBD Mask 25" by "Designz by BabyDragon".
Font of choice. I used "Rage Italic"at DaFont.
Most elements used are resized to fit where I needed them to go. Below is the
list of elements used and the percentage I resized them by. If there is no
percentage, the element was not resized. It may help if you go ahead and resize
each element.
WP-MYSTICALMOMENTS_KATHARINE_HEARTS - 75%
21-2-SybileArt tube - 50% resizing will depend on size of tube you use.
WP_MYSTICALMOMENTS_KATHARINE_DECO2
WP_MYSTICALMOMENTS_KATHARINE_FLOWER15 - 75%
WP_MYSTICALMOMENTS_KATHARINE_JAR - 50%
WP_MYSTICALMOMENTS_KATHARINE_CRYSTALBALL - 50%
WP_MYSTICALMOMENTS_KATHARINE_2 (Paper) - 75%
DBD Mask 25
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 Color Black unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600x600.
Copy and paste paper as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
1.Copy and paste WP-MYSTICALMOMENTS_KATHARINE_HEARTS as new layer, add drop shadow
2.Copy and paste tube as new layer**. Add drop shadow.
3.Copy and Paste WP_MYSTICALMOMENTS_KATHARINE_DECO2 as new layer and move to above
mask layer.
4.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_FLOWER15 as new layer. Move to under
tube layer and add drop shadow.
5.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_JAR as new layer. Move to under hearts
layer**. Add drop shadow.
6.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_CRYSTALBALL as new layer**.
7.Add your wording and or name.
Add proper copyright. url and Lic if required.
With just using a kit and this being a Facebook banner you would put
Kit "Mystical Moments" by Wicked Princess Scraps
Add name and your done.
This tutorial "Mystik Dragon" was written by Rebecca Albertson on 02/12/22.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Mystik Dragon" tut in the subject line.
Can't wait to check them out!
It has been awhile .. Like 3 years since I have done a tutorial. I was in online college going for my Bachelors in Science of Sociology with Emphasis in Social Work degree. I have since graduated and also been promoted at my job. I do however have time now to start doing some tuts. I am not on any CT teams at the moment. These are just random tuts of stuff I have.
This tut was made using PSP 2022 Ultimate.
And knowledge of PSP 2022 Ultimate.
With Windows 10.
Supplies needed
Tube of choice, I used "Vinegar 7-1" by "Vinegar". You can get her at CDO.
FTU/PTU kit "The Hunt" by "Wicked Princess Scraps".
Mask "MB and SW Mask 129" by "Moonbeams and Spiderwebs".
Font of choice. I used "HalloWitchZ" from Dafont.
Most elements used are resized to fit where I needed them to go. Below is the
list of elements used and the percentage I resized them by. If there is no
percentage, the element was not resized. It may help if you go ahead and resize
each element.
Tube of Choice
WP_THT_FRAME8 - 60%
WP_THT_MESH - 60%
WP_THT_BLOODSPATTERS - 85%
WP_THT_TREE3 - 65%
WP_THT_WORDART2 - 45%
WP_THT_SKULL - 20%
WP_THT_PP6 - 76%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 Color Black unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600 .
Copy and paste WP_THT_PP6 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
1. Copy and paste WP_THT_FRAME8 as a new layer. Add drop shadow.
2. Copy and paste tube as new layer. Move down to below the WP_THT_FRAME8
layer. Add drop shadow.
3. On the tube, selections, select all, select float, select defloat. Now
click on thge frame layer and using the eraser tool to erase just the part
of the layer infront of the tube. Selections - Select none. Gives the tube
the look of coming out of the frame.
4. Copy and paste WP_THT_MESH as new layer and move to below the tube layer.
5. Copy and paste the WP_THT_BLOODSPLATTEERS as a new layer. Change the
opacity to 59 and move to above the WP_THT_MESH layer.
6. Copy and paste WP_THT_TREE3 as new layer. Move to top layer above frame.**
Add drop shadow.
7. Copy and paste WP_THT_WORDART2 as new layer. Add drop shadow, change
color of shadow to white.** Once moved to top corner, duplicate layer,
then merge down.
8. Copy and paste WP_THT_SKULL as new layer. ** Add drop shadow.
9. Copy and paste WP_THT_PP6 as new layer. Move to bottom layer.
Layers, New Mask layer. Find the mask in the list Click ok. Merge group
Add proper copyright. url and Lic if required.
With just using a kit you would put Kit "The Hunt" by Wicked Princess Scraps
Add name and your done.
This tutorial "Get Out" was written by Rebecca Albertson on 10/8/21.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied but a link can be shared in groups
for challenges and what not.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Get Out" tut in the subject line.
Can't wait to check them out!
Blogroll
Categories
- *Coming Soon*
- 4th of July
- American
- Animals
- Animation
- Arthur Crowe
- Barbara Jensen
- BCA
- Blabs
- CDO
- Charles Bristow
- Christmas
- Clustor Frames for CT
- Creative Design Outlet
- Creative Scraps CT
- CT Facebook Banner
- CT Snags
- CT Tags
- DBV Masks
- Dragons
- DreamScape Imaging
- Elegant Inspirations
- Elias Chatzoudis
- Elizabeth Austin
- FaceBook Timeline
- Fairytale
- Fall
- Fantasy
- Forum Set
- FourXDesigns
- Foxys Designz
- Freeks Creations CT
- FTU
- Goth
- GraphFreaks
- Halloween
- Irish Princess Designs CT
- Joel Adams
- Jose Cano
- June 2018
- Justice Howard
- Keith Garvey
- Mellows Graphics
- Millies PSP Madness
- Moonbeams and Spiderwebs masks
- Mystical Scraps
- Mystical Scraps CT
- New Years
- No Flutter
- No Kit
- No Tube
- PFD Kit
- PicsforDesign
- Pink Kit CT
- Pinup Toons
- PSP 2022 Ultimate
- PTU
- PTU now FTU
- PTU tutorial
- PU Only
- Rabid Designs CT
- Rachael Tallamy
- Red White and Blue
- Rissa's Designs
- Rissa's Designs CT
- Scrap Candy CT
- Scrappin Krazy Designs CT
- Scrapping With Friends
- Selina Fench
- Simple Blog Tuts
- Snag Set
- SoulDesigner CT
- Spring
- St. Patricks Day
- Summer
- Sunny Rose
- Sybile Art
- Tashas Playground CT
- The Hunter
- The PSP Project
- The PSP Project CT
- Tony T
- Tubes 4 Taggers
- Twyzted T's Playroom
- Valentines
- Veterans Day
- Video Tutorial
- Vineger
- Wendy Gerber
- Wendy Gerber CT
- Wicked Princess Scraps
- Wicked Princess Scraps CT
- Winter
- XeracX
- Zindy Nielson