This tut was made using PSPx4

And knowledge of PSPx4.

Supplies needed 

PTU Party in the City from Tasha's Playground HERE.

Tube of Choice One with a close up. I am using Four X's Designs. 

You need a lic to use her work. You can get it and her work at her store HERE.

Font Of Choice I used Forte .You can get it HERE.

Mask 258 by Vix you can get it HERE.

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new image 600x600 

Open frame 2 Copy and paste as new layer.

Open cityscape resize by 80% Copy and paste as new layer 

Place under frame layer and just a bit to the bottom.**

Add new rastor laye and move to under cityscape.

Using magic wand click inside frame Selections Modify expand by 2

flood fill on the new layer with black. Selections none

Open sparkle2 resize by 75 copy and paste as new layer.

Open Streamer image flip horizontal copy and paste over frame layer. 

Move to left of frame. **

Copy tube and paste as new layer. May have to resize. I did by 75%.

Place as top layer**

Open stars image flip horizontal copy and paste as new layer.

Move down and to right just a touch. ** Add drop shadow to stars and frame.

Open mask and paper6. Copy and paste paper as new layer move to bottom.

Layers - New mask layer - from Image pick your mask click ok. Merge group.

I added a drop shadow you may if you wish.

Resize all to 575x575

Add proper/clear copyright and Lic.# (If Needed)

Add name and were done.

This tutorial was written by Rebecca Townsley on 5/9/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU City Life Result in the subject line

Can't wait to check them out!

This tut was made using PSPx4

And knowledge of PSPx4.

Supplies needed 

PTU Angel Desires from Inspired Creations HERE.

Tube of Choice One with a close up. I am using Susan Justice. 

You need a lic to use her work. You can get it and her work at *Coming Soon*

Font Of Choice I used on name A Charming font .You can get it HERE.

On Wording I used Adorable you can get it HERE.

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open New Image 600x200

Open paper 5 and click on flood fill tool. Make Paper 5 your pattern

flood fill image with paper.

Copy Close up may have to resize bigger. Place to left of Signature.**

Blend Luminance(L) Duplicate Blend Hardlight.

Open Sparkles 2 Copy and paste as new layer.

Open Clouds Copy and paste as new layer.

Copy tube paste as new layer place to right of Signature.**

Image flip Horizontal. Duplicate Blend Hardlight.

Open Candle 2 resize by 40% copy and paste as new layer. Place to left of

signature just under the eyes of close up.

On background layer Selections - Select all - Modify - Contract by 4

Add new raster layer move to top layer flood fill Black. 

Adjust - Add/remove noise - add noise 100% Add Drop Shadow. 2, 4, 100, 9

Add proper/clear copyright and Lic.# (If Needed)

I added a saying you can if you wish to add or not.

Add name and then a drop shadow to name if you wish.

For the Avatar...

Duplicate Signature Click on your crop tool Width 150 height 175

delete all layers but the Cloud, sparkles, smaller tube, and background.

On Background layer Seletions all - Modify - Contract by 4 Selections Invert

Adjust Add new raster Move to top Flood Fill Black

Add/remove noise - add noise 100% Add Drop Shadow.

Don't forget the proper Copyright and Lic infor for your Avatar

Using same font as did for name in Signature add name or Intials.

Add drop shadow same drop shadow.

This tutorial was written by Rebecca Townsley on 5/9/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Woman are Angels Result in the subject line

Can't wait to check them out!

This tut was made using PSPx4

And knowledge of PSPx4.

Supplies needed 

PTU Lucky Bunny from Disenando Scaps HERE.

Tube of Choice One . I am using Barbara Jensen. 

You need a lic to use her work. You can get her work HERE.

Mask 37 from Moonbeams and Spiderwebs HERE.

Font Of Choice I used PetraScriptEF-Alternate .You can get it HERE.

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with new Image 600x600.

Open LuckybunnyGarden Copy and paste as new layer

Resize by 85%. 

Open LuckyBunnymagic4 Copy and paste as new layer.

Resize by 50% and place to right and 

just behind the LuckybunnyGarden.** 

Open Luckybunnybottle3 copy and paste as new layer.

Resizze by 25% place to bottom left.**

Open Luckybunnyqueenofhearts copy and paste as new layer.

Resize by 15% and place just to right of bottle.**

Open Luckybunnyballons4 Copy and paste as new layer.

Resize by 50% and move to right of tag.**

Open Luckybunnydnpaper12 copy and paste as new layer.

Resize by 75% move to bottome layer.

Add drop shadow to all elements but the LuckybunnyGarden.

Open mask...Layers new mask layer from image. 

Find the mask in the list click ok.

Merge group.

Add proper/clear copyright and Lic.# (If Needed)

Add name and your done!

This tutorial was written by Rebecca Townsley on 4/25/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Wonderland Result in the subject line

Can't wait to check them out!

This tut was made using PSPx4

And knowledge of PSPx4.

Supplies needed

FTU Melancholy Love from Wicked Princess Scraps HERE.

Tube of Choice One . I am using a Camilla Drakenborg Exclusive.

You need a lic to use her work. You can get her work HERE.

Font Of Choice I used MeaCulpa which is a PTU font.

When you see ** look at tag to see placement for Elements.

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.

I have made a tag or to and not check and when I got done

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new 600x600

Open WP_ML_FRAME copy and paste as new layer.

Open WP_ML_ROSECLUSTER resize by 50% copy and paste as new layer

over the frame in top left corner**

Using Magic wand click inside frame Selections - Expand by 2

Open WP_ML_PP1 Resize by 62% Copy and paste as new layer - Delete

Move to below frame layer. Duplicate Blend Hard Light

Copy and paste tube as new layer** - Erase bottom of tube.

Selections None add drop shadow to Tube(Duplicate Blend Hard Light tube only),

Frame, and Rose Cluster Layer.

Open WP_ML_GLITTERSWIRL copy and paste as new layer as bottom layer.

Move to Left just a bit.** Add drop shadow.

Open WP_ML_SWIRLEDSTAIRCASE resize by 75% Copy and paste as new layer on top.

On the frame Selection all - Float - defloat Erase the top part of staircase

in frame. Selections - none erase the rest of the staircase at top.

Open WP_ML_BOTTLE resize by 50% copy and paste as new layer.

Place at bottom left of frame. Add drop shadow.

Add proper/clear copyright and Lic.# (If Needed)

Add Name and your done!

This tutorial was written by Rebecca Townsley on 4/17/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

FTU Melancholy Result in the subject line

Can't wait to check them out!

This tut was made using PSPx4

And knowledge of PSPx4.

Supplies needed

PTU Totally Rad from Tasha's Playground HERE.

Tube of Choice One . I am using a Verymany Exclusive.

You need a lic to use her work. You can get her work at PFD HERE.

Template 19 from Toxic Desires HERE.

Mask 306 from Insatiable Dreams HERE.

Font Of Choice I used Snaggle Puss .You can get it HERE.

When you see ** look at tag to see placement for Elements.

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.

I have made a tag or to and not check and when I got done

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open template Shift+D to duplicate it Delete Original.

Click on Lrg White Circle Selections All - Float - Defloat - Invert

Open paper16 resize by 62% Copy and paste as new layer - delete

Open Tube resize by 75% Copy and paste as new layer

Erase bottom part of tube. Selections None. Add Drop Shadow.

Click on the bottom Square 1 Selections - Float - Defloat - Invert

Open paper20 resize by 62% Copy and paste as new layer.

Move to over square** Delete. Selections None Add Drop Shadow.

Repeat above for Top Square 1

Pick a color from the tube, using your Change to Target Brush go over

and then add drop shadow to each of these items...

Wordart layer

Green glittered Heart

Glittered Circle

Pixel wordart

Black Circle

Add drop shadow to Pink Glittered Heart

Open Bear resize by 75% Copy and paste as new layer.

Place to bottom left of tag** Add Drop Shadow.

Open stars copy and paste as new layer and move to

bottom above the background layer.

Open paper4 copy and paste as new layer over background layer.

hide the background layer.

Open Mask On Tag Layers New Mask Layer from Image Select the Mask in the list

Invert mask Data Unchecked.

Add proper/clear copyright and Lic.# (If Needed)

Add name and your done!

This tutorial was written by Rebecca Townsley on 4/17/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Girly Girl Result in the subject line

Can't wait to check them out!

This tut was made using PSPx4

And knowledge of PSPx4.

Supplies needed 

PTU Party Rock from Tasha's Playground HERE.

Tube of Choice One with a close up. I am using Verymany. 

You need a lic to use her work. You can get it and her work at PFD HERE.

Font Of Choice I used AlexBrush.You can get it HERE. 

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new image 600x600

Open frame5 copy and paste as new layer. 

Move to bottom right just a bit**

Copy and paste tube as new layer.**

Resize by 75% plce over frame.

On the frame selections all - float - deflaot and erase 

the part of tube at bottom of frame.

Using magic wand click inside frame Selections Modify by 2 - Invert

Open Paper 6 Resize by 85% copy and paste as new layer - Delete Selections none

Move to under frame layer. Add Drop Shadow to frame.

Open Feather copy and paste as new layer on top.

Image free rotate by 75 to the Right. Move to right bottom of frame.**

Add drop shadow, Duplicate - Image - Flip Vertical

Merge Down - Duplicate - Image - Flip Horizontal move to left.**

Open Stars copy and paste as new layer under the paper layer put on bottom left corner.

Add shadow Duplicate - Image Vertical then Image Horiozntal. 

Move to upper right hand corner.

Open Lips Copy and paste as a new layer. Place inbetween the 2 sides of feathers.

Add shadow. Selections - all - float - defloat - Invert.

Open sparkles copy and past as new layer over the lips. Delete

Open Drink copy and paste as new layer and move to left of tag.**

Open Party Ballons - copy and paste as new layer at top right of tag.**

Resize all layers by 95%.

Add proper/clear copyright and Lic.# (If Needed)

Add name and then a drop shadow to name if you wish.

This tutorial was written by Rebecca Townsley on 2/29/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Sexy Party Result in the subject line

Can't wait to check them out!

This tut was made using PSPx4

And knowledge of PSPx4.

Supplies needed

PTU St Patrick Fairy World from Disenando Scraps HERE.

Tube of Choice One with a close up. I used Carrie Hall.

You need a lic to use his work. You can get it and his work at *Coming Soon*

Font Of Choice I used Whisper HERE.

Filters Eyecandy 4000 Gradiant Glow.

When you see ** look at tag to see placement for Elements.

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.

I have made a tag or to and not check and when I got done

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open sanpatrickdayframeribbond Shift+d to Duplicate

Close original. Resize by 86% Selections - All - float - defloat

Open tube copy and paste as new layer.

Mocve to top left od frame and erase part of the tube in the selectionof frame.

Selections - None Erase rest of Tube that is hanging from the bottom under frame

Layers New Rastor layer Move to Bottom Using Selection tool Shape circle

make a circle to fit under the frame.

Open stpatrickfairyworldpaper6 resize by 76% copy and paste as new layer.

Selections invert delete. You may have to move it around a bit to look right.

Add Drop Shadow to frame

Open stpatrickfairyworlfroggdn resize him by 45% Image - Flip Horizontal Copy and paste on tag

as new layer. Place at bottom right. May need to resize it a bit mor to your liking.

I did it again by 75% Image flip horizontal move to left** a bit and added drop shadow.

Duplicate - Resize by 40% Move to under the tube layer

and to look like it is in her hands, like she is kissing it.

Open springsecretgardenfeadrop2 resize by 45% copy and paste as new layer.

Move to right the frog ** Add drop shadow.

Open stpatricksfairyworldflower resize by 30% place under frog layer at bottom

and above the grass layer. and inbetween the grass and frog.

Image resize all layers by 86%

Add proper/clear copyright and Lic.# (If Needed)

Add your name turn it around a bit. Convert to Rastor layer.**

Effects Eyecandy 4000 Gradient Glow settings - 3, 25, 100

This tutorial was written by Rebecca Townsley on 3/23/12.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Hoping for the Best Result in the subject line

Can't wait to check them out!