Friday, October 5, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU A Day of July Mini Kit by Love Crea HERE.
Tube of Choice. I am using Ismael Rac.
You need a lic to use his work. You can get his work HERE.
Font of choice I used Kyboshed .You can get it HERE.
Mask used Mask 41 from Moonbeams and spiderwebs. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new raster layer 600x600
Open frames (2) resize by 40% copy and paste as new layer.
Using magic wand click inside each frame.
Selections - expand by 2 - invert
Open papiers (4) resize by 16% copy and paste as new layer.
move to under frame layer. Delete
Open Elements (13) resize by 40% Copy abd paste as new layer.
Move to under paper Selections - none
Open tube Copy and paste as new layer. May need to resize a
bit depending on tube used. Just play with it a bit.
Add drop shadow settings for this 2, 2, 61, 10
Move to center**
Using magic wand click inside bottom square of frame.
Selections invert on Tube using eraser only erase
bottom part to look like she is coming out of the sqaure.
Selections none Add drop shadow to frame.
Open elements (7) resize by 30% place over tube**
Add drop shadow. On tube selections all - float - defloat.
erase the part of the ribbon at the top. This will make the
ribbon look like it is wrapped around the tube. Selections none.
Open elements (11) resize by 15% copy and paste as new layer.
Move to bottom right.** add drop shadow.
Open elements (3) resize by 15% copy and paste as new layer.
Move to right of the mushroom house.** Add drop shadow
settings 0,0,100,2. Duplicate move behind the mushroom house,
up, and to the left just a tad.** Duplicate move down and to
left just a tad more.**
Open elements (9) Copy and paste as new layer.
Resize by 15% move to behind mushroom house to the left a bit.**
It will look like it is peeking out from behind the house.
Add drop shadow.
Open papiers (10) resize by 17% copy and paste new layer.
Move to bottom layer. Layers, new mask layer, from image.
Find the mask in the list click ok.
Merge group change opacity to 40.
Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
On the name I used a color from tube for foreground.
Black for the background Stoke set to 1. Image free rotate
90 degrees to the left and used the pick tool to turn
it to be even with frame. Drop shadow settings are -2,3,100,8.
This tutorial was written by Rebecca Townsley on 10/5/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Autumn Moonlight Result in the subject line
Can't wait to check them out!
Monday, October 1, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit Girls Girls Girls by Freeks Creations HERE.
Tube of Choice. I am using Victoria Fox.
You need a lic to use her work. You can get her work *Coming Soon*.
Font of Vladimir Script .You can get it HERE.
Mask used EvG_GrungeMask 1 from Creative Misfits.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new image 700x700
Open FC_GGG_E40 copy and paste as new layer.
Click inside frame with magic wand.
Selections - modify - expand by 2 - Invert.
Open FC_GGG_P8 resize by 75% copy and paste as
new layer under the frame - Delete Selections - none
add drop shadow to frame.
Open FC_GGG_E38 copy and paste as new layer.
Place to bottom and center of frame. **
add drop shadow.
Open tube copy and paste as new layer.
(the one without the shoe)
Place to right of frame.**
Open FC_GGG_E10 resize by 25% copy and paste as new layer.
Place to left and bottom of frame,** add drop shadow
duplicate, image, flip horizontal move to right and down just a tad.**
Open FC_GGG_E24 resize by 50% copy and paste as new layer.
Place to top left of frame.**
Open FC_GGG_E5 resize by 50% copy and paste as new layer.
Place under tube layer and have handle under her hand
to look like she is holding it.** Add drop shadow.
May need to use a lighter color.
Open FC_GGG_E28 copy and paste as new layer.
Put as bottom layer. Move to bottom right of frame.**
Add drop shadow. Duplicate and move that to top right of frame.**
Open mask and FC_GGG_P10 Copy and paste the paper as a new layer
and move all way to bottom. Layers, new mask layer, from image.
Find mask in list click ok and merge group.
Resize al layers by 82%.
Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
This tutorial was written by Rebecca Townsley on 10/1/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Dominating the Night Result in the subject line
Can't wait to check them out!
Thursday, September 20, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU kit Pumkin Moon by Irish Princess Designs HERE.
Tube of Choice. Preferably one with a close up. I am using Elias Chatzoudis.
You need a lic to use his work. You can get his work HERE.
Template by BKC Designs you can get it HERE.
Font of Choice I used Harington .You can get it HERE.
Mask used Halloween mask 2 by WeeScotsLassCreations.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template. Shift+D to Duplicate. Close original.
Delete the credits and the credits background.
Choose a color or two from your tube using change to target brush go over
orange circle, orange rectangle, and orange square.
On Orange square Selections - all - float - defloat - Invert.
Open IBD_paper2 resize by 69% copy and paste as new layer Delete
Selections none. Blend mode Screen.
On Black square Selections - all - float - defloat - Invert.
Open IBD_paper1 resize by 69% copy and paste as new layer Delete
Selections none.
On orange rectangle Selections - all - float - defloat - Invert.
Open IBD_paper4 resize by 69% copy and paste as new layer Delete
Selections none. Blend mode Screen.
On Black rectangle Selections - all - float - defloat - Invert.
Using IBD_paper1 resize by 69% copy and paste as new layer Delete
Selections none.
On Orange circle Selections - all - float - defloat - Invert.
Open your tube using the close up place to the left of circle** - delete
Slections none. Blend mode Darken. Drop shadow of 0, 0, 100, 9.
Erase any shadow overhang you see on sides of tag from tube.
On small strips 1, 2, and 3, floodfill using a color from tube
and black for a gradiant color.
On Orange circle Selections - all - float - defloat - Invert.
Open tube copy and paste as new layer to right of circle**
Erasing only the bottom part to look like she is standing in the circle.
Open IBD_skullsitter resize by 50% copy and paste as new layer
place to bottom left of tag.**
Open IBD_beware resize by 50% copy and paste as new layer.
Place to right of tag at bottom just over lapping the skullsitter.**
Open IBD_Teethdrip resize by 30% copy and paste as new layer.
Place behind tube kinda center like.**
On bottom layer flood fill using a color from tag or
copy and paste one of the papers.
Open mask and on tag Layers - new mask layer - from image.
Find the mask in the list click on it then ok. Merge Groups.
I added a drop shadow to all the elements, tube and the
Black circle, rectangle, and square and all the small strips.
Add proper/clear copyright and Lic.# (If Needed)
Add name and your done.
This tutorial was written by Rebecca Townsley on 9/20/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Beware Result in the subject line
Can't wait to check them out!
Wednesday, September 12, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
FTU kit Well Hello Kittyby Wicked Princess Scraps HERE.
It is the 10th kit down.
It is the 10th kit down.
Tube of Choice. I am using Victoria Fox.
You need a lic to use her work. You can get it and her work *Coming Soon*.
Font of Choice I used TheNautiGal .You can get it HERE.
Mask used Mask 22 from Moonbeams and Spiderwebs.You can get it HERE.
My template Bite me which you can get HERE.
Mura's Meister - Copies - freeware
Eyecandy 4000 gradiant glow - PTU
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open Template and delete the two info layers.
On Rastor 4 Selections - all - float - defloat - invert.
Open WP_WHK_PP5 Copy and paste as new layer.
Move to below rastor 4. On rastor 4 blend mode - Hard Light
Open tube copy and paste -Delete.
Using Mura's Meister Copies Preset Menu Wallpaper(rotate)
Blend mode soft light Selections none.
On Rastor 3 add a drop shadow Pick a color from the tube.
Add drop shadow using change to target brush go over the frame.
Add another drop shadow.
Using same color and change to target brush go over Rastor 5,
Copy of rastor 5, and rastor 1. On all three of those layers
go to Effects - edge effects - enhance. on Rastor 5 and copy
rastor 5 add drop shadow.
On rastor 2 Effects - eyecandy 4000 - gradiant glow Settings are
8, 25, 100 draw only outside selection checked Color using same
color used for the outline.
On rastor 2 Selections all - flaot - defloat. Add new rastor layor.
Open WP_WHK_PP9. Use it as a pattern and flood fill the letters.
Selections none Move to below rastor 2 On rastor 2 Blend mode Hard light.
Copy and paste your tube as top layer. Resize by 85%
Move to left of tag** Add drop shadow.
Open WP_WHK_BEADEDFLOWER copy and paste as new layer above rastor 9.
Move up and over to right some** add drop shadow.
Duplicate move down and to the left some.**
Duplicate that and move it up and to left some.**
Open WP_WHK_CURTAIN copy and paste as new layer.
Resize by 60% move to left and under the frame.**
Erase any over hang add drop shadow.
Open WP_WHK_LIPS resize by 25% Place under rastor 6 and move
to left and down.**
Pick a fancy font and add on rastor 6
You know you want to..
Resize all layers by 75%.
Open WP_WHK_PP9 copy and past as new layer moving all way to bottom layer.
Open mask go to layers - new mask layer- from image. Find mask in list click ok.
Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name. Convert to rastor layer Gradient glow Settings are
8, 25, 100 draw only outside selection checked Color white.
Add drop shadow of 3, 3, 100, 0
This tutorial was written by Rebecca Townsley on 9/12/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU You Know You Want To Result in the subject line
Can't wait to check them out!
Monday, August 13, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Skullz N Stripez by Tasha's Playground HERE.
Tube of Choice. I am using Vicki Yeager.
You need a lic to use her work. You can get it and her work *Coming Soon*.
Font of Choice I used Milton Burlesque .You can get it HERE.
Mask used 285 from Insatiable Dreams.You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new image 600x600.
Open frame4 copy and paste as new layer.
Using magic wand and click inside of frame4.
Selections - modify - expand by 2 selections - invert
Open paper14 resize by 86% copy and paste as new layer.
Move to bottom layer delete selections none.
add drop shadow to frame.
Open your tube copy and paste as new layer.
May have to resize to fit your needs.
Move a bit to the left** on top layer.
Add shadow.
Open cityscape copy and paste as new layer.
using pick tool rotate a bit to the left
to match the frame amd move down a tad
and below the frame layer.**
Erase the eccess from outside the frame.
add drop shadow color white -5, 2, 100, 11.
Open Pills Copy and paste as new layer over the frame.
move to bottom right corner of frame.
Open scatter copy and paste as new layer behind the paper cityscape layer.
Move up and to the right a bit.** Add drop shadow.
Duplicate - Image - flip horizontal then vertical. Move to bottom left**
Open Skull resize by 60% copy and paste as new layer over frame.
Move to top right corner of frame.** Add drop shadow.
On the frame layer selections - all - float - defloat - invert.
Open paper6 resize by 86% copy and paste as new layer.
Delete Blend mode soft light.
Open your mask. Layers New layer move to bottom
flood fill with either a paper or
color from tube. Layers new mask layer from image. Find the mask in the
list click on it then ok. Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name using a light color for inside of font and darker of that color
with a stroke of 2. Adding a drop shadow of white -2,3,68,8.
This tutorial was written by Rebecca Townsley on 8/13/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sophisticated Burlesque Result in the subject line
Can't wait to check them out!
Saturday, August 4, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Urban Addiction Abstract Creations HERE.
Tube of Choice. I am using Alehandra Vanhek.
You need a lic to use his work. You can get it and his work HERE.
Font of Choice I used wickhop handwriting.You can get it HERE.
Mask used MB and SW Mask 17 by Moonbeans and Spiderwebs.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open New Image 600x600
Open e43 copy and paste as new layer.
Go ahead and copy and paste your tube.Resize if you have to.
Place kinda at bottom of the city (e43).**
Add drop shadow.
Oprn e18 Copy and paste asnew layer. Resize by 45%.
Move to about the cnter of the tube. Add drop shadow.
Open e16 Copy and paste as new layer. Resize by 20%.
Move to just beside the bear (e18).**
Open e57 Copy and paste as new layer. Resize by 60%.
Move to top right of the buildings
them move to bottom to make bottom layer.** Add Drop Shadow.
You will see part of its paw sticking out...
I erased it. Now the bear looks like it is pearing over the
buildings. Watching and waiting.
Open e13 copy and paste as new layer. Resize by 20%.
Move to under the head of the tube. Bottom right of tag.**
added a drop shadow.
Open e9. COpy and paste as new layer. Resize by 20%.
Move to over the mps player (e16) amd on the mp3 player**
Selections all - float - defloat. using the eraser on the headphones (e9)
erase just the partat top to look like its wrapped around the mp3 player.
Add drop shadow.
Open e38 Copy and paste as new layer.
Move to top of tag. add drop shadow.
Open p4 resize by 88% Copy and pastre as new layer.
Move all way to bottomlayer for mask.
Layers - New mask Layer - From Image -
Choose the mask in the list. Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name and use a white dropshadow. of a thin graidant glow
if you have eyecandy 4000.
This tutorial was written by Rebecca Townsley on 8/4/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Urban Attitude Result in the subject line
Can't wait to check them out!
Friday, August 3, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Cobalt Butterfly from Irish Princess Designs HERE.
Tube of Choice. I am using Barbara Jensen.
You need a lic to use her work. You can get it and her work HERE.
Font of Choice I used One Starry Night.You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open New Image 600x600
Open IBD_Element2 Copy and paste as new layer. Resize by 95%
Move to bottom of tag.**
Open IBD_Element7 Copy and paste as new layer. Resize by 50%
Move to left of the grass and in layers make it the layer
under the grass.** I added a drop shadow you can if you like
or leave it as is.
Open IBD_Element32 Copy and paste as new layer. Resize by 15%
Move to the bottom left of tag.** Add drop shadow. Duplicate
resize by 85% using pick tool turn just a bit move slightly
down and to the right** Duplicate that and move slightly up
and to the right and in layers put under the bigger rose layer.**
Merge Roses.
Open IBD_Element36 Copy and paste as new layer. Resize by 25%.
Move to the right of the roses as layers move to under roses layer.
Add drop Shadow.
Open IBD_Element39 Copy and paste as new layer. Resize by 75%
Move to right of tag using as top layer** Duplicate Merge down.
Duplicate Image Flip Horizontal move over to left of tag.**
Open your tube copy and paste as new layer. Resize if you need to.
Move to right of tag and under the sparkle layers.
Add Drop shadow settings 2, 3, 100, 8.
Open IBD_Element6 Copy and paste as new layer. Resize by 30%.
Move to upper right infront of the tube. Kinda looks like
she is watching them flay away. Add drop shadow.
Open IBD_Element55 Copy and paste as new layer. Resize by 90%.
Move to very bottom of layers and kinda center but tothe left just a tad.**
Add proper/clear copyright and Lic.# (If Needed)
And then a name.
This tutorial was written by Rebecca Townsley on 8/3/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Blue Summer Nights Result in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)