Wednesday, December 5, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit Snow Wild by Toxic Desires.
You can get it The PSP Project HERE.
Tube of Choice. I am using Barbara Jensen.
You need a lic to use her work. You can get it and her work HERE.
Font of choice I used Good Vibrations. You can get it HERE.
Template by Twyzted Ts Playroom.
You can get it HERE.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - depends on size of tube used
paper 1 - 72%
paper 10 - 72%
paper 11 - 72%
paper 13 - 72%
paper 18 - 72%
paper 22 - 82%
filmstrip
branches - 85%
swirl - 85%
bow 4 - 50%
moon - 50%
cupcake - 50%
spaltter
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template Shift+D to duplicate. Close original.
Delete Info layer.
Select raster 4 Selections all, float, defloat, invert.
Open paper 1 Copy and paste as new layer. Delete.
Repeat raster 12
Select raster 3 Selections all, float, defloat, invert.
Open paper 13 Copy and paste as new layer. Delete.
Select raster 6 Selections all, float, defloat, invert.
Open paper 11 Copy and paste as new layer. Delete.
Select copy of raster 6 Selections all, float, defloat, invert.
Open paper 10 Copy and paste as new layer. Delete.
Select raster 19 Selections all, float, defloat, invert.
Open paper 18 Copy and paste as new layer. Delete.
Select raster 2 Selections all, float, defloat, invert.
Open paper 22 Copy and paste as new layer. Delete.
Add drop shadow to frames and to
layers with no frames
Copy and paste tube as new layer. Move to center
Place over raster 20, under raster 7.**
Duplicate, Blend hardlight. Add Drop shadow to bottom tube.
Select top tube merge down.
Erase bottom of tube to look like coming out
of oval.
Copy and paste Filmstrip as new layer. Place over raster 20
using pick tool turning to left a bit.**
Copy and paste Branches as new layer. Paste over Filmstrip move to
left.**
Copy and paste Swirl as new layer. Place over raster 22.**
Copy and paste ow 4 as new layer over raster 16.
Place to top left a bit.**
Copy and paste Moon as new layer over branches layer.
Move to top right pick tool. Turn to left a bit.**
Copy and paste cupcake as new layer under tube layer.
Move to left and bottom.**
resize all layers by 85% Add a drop shadow to all the elements used.
Copy and paste splatter over white bg layer (hidden in the template)
Move to left, duplicate move to right.**
Add proper/clear copyright and Lic.# (If Needed)
Add your name and your done.
This tutorial was written by Rebecca Townsley on 12/5/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Wild Winter Angel in the subject line
Can't wait to check them out!
Monday, December 3, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU NOW FTU kit Christmas in the City by Tasha's Playground.
You can get it HERE.
Tube of Choice. I am using Victoria Fox.
This tube I am using is not in store yet so this is also a teaser tut.
It is COMING SOON!
You need a lic to use her work. You can get it and her work *Coming Soon*.
Font of choice I used Santas Big Secret. You can get it HERE.
Template by Peachy Keen Designs. First on of the two.
You can get it HERE.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Template - 120% all layers checked
paper2 - 69%
paper6 - 69%
paper8 - 72%
Tube - 75%
lights
bells2 - 75%
stocking - 50%
sparkle - 90%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open Template Shift+d to duplicate
Close original and then delete info layer.
Open paper2 click on left photo layer selections all, float, defloat
invert. Paste paper as new layer Delete selections none.
Delete original layer. Repeat for right photo layer and center
photo frame. Add drop shadow to frame.
Open paper6 click on right photo frame layer selections all, float, defloat
invert. Paste paper as new layer Delete selections none.
Delete original layer. Repeat for left photo frame layer and
center photo. Add drop shadow to frames.
Click on the doodles layer selections all, float, defloat
invert. Open paper8 copy paste as new layer. Delete, selections
none. Delete original layer. Add a drop shadow using a
color from the tube.
Using Change to target brush pick a color from tube or kit you are
using. Click on the leaves layer and go over that. Pick a different
color and click on the holly layers and go over that with the brush.
Add drop shadow to all those layers.
Copy and paste tube as new layer. Move to left just a bit.**
Add drop shadow.
Copy and paste lights as new layer. Move to bottom of tag.**
Add drop shadow.
Copy and paste bells2 as new layer. Move to bottom of tag over
the tube.** Add drop shadow. On tube selections all, float, defloat.
Back to the bells2 use eraser tool to erase the top ribbong on the
bells to make it look like that part is behind the tube.
Copy and paste stocking as new layer. Move to top right of tag.**
Add drop shadow. Duplicate, image, flip horizontal and move to left
of tag.
Using crop tool width 600 hight 525 move it to top click the check.
Copy and paste sparkle as new layer.
Add proper/clear copyright and Lic.# (If Needed)
Add name using inner bevel with following settings
in picture below and were done.
This tutorial was written by Rebecca Townsley on 12/3/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Naughty and Nice Reindeer in the subject line
Can't wait to check them out!
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit Midnight Blues by Rabid Designz.
You can get it HERE.
Tube of Choice. I am using Lori Kerals.
You need a lic to use her work. You can get it and her work HERE.
Font of choice I used SnagglePuss. You can get it HERE.
EyeCandy 4000 gradiant Glow
Muras Meisters Copies
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Element_1 - 15%
Element_27
Paper_7
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new image 600 x 250
flood fill with white copy delete
Open Paper_7 paste as new layer on paper.
Selections all, float, defloat.
Click on paper layer copy.
Back to forum sig paste as new layer.
Now you have your background.
Copy and paste tube as new layer.
Blend mode Multiply Opacity 69
Effects Muras Meisters - Copies. Settings are
Wall Paper Random Wraparound
Number 15, x and y 50, Angle and Rotation 0,
Attenuation 0, Scale 100, Thru BG Range and fade out 0.
Click Ok. Blend mode Multiply Opacity 69
Copy and paste tube as new layer. Flip horizontal
and place to left of sig**. Duplicate Blend mode Hard light.
Add drop shadow on original.
Copy and paste Element_27 as new layer.
Move to top right of sig**. Duplicate x4.
Should have 5 of them. Using pick tool rotate each one a bit.
Effects Eyecandy 4000 Gradiant Glow Settings
Color of choice I used white. 4, 100, 100. Click ok.
draw only outside selection. Image Flip Vertically.
On background layer selections all modify,
Contract by 5 Selections invert. Add new layer,
move to top of sig and floodfill with color from tube.
Selections none. Adjust add remove noice, Add noise,
Gaussian 100% Monochrome checked. hit ok. add drop shadow.
Add proper/clear copyright and Lic.# (If Needed)
Add a saying if you wish like I did. If not then just
add your name and your done with the sig. On name I used
Eyecandy 4000 gradiant glow same settings as before in text.
Then added a drop shadow of 2, 2, 100, 4
For the Avitar using Crop tool pixel dimensions w150 x h150
Move the box over to where you want to show in your avi.
Click the check. Delete all layers from the sparkles up.
On background layer selections all Modify contract by 5.
Selections invert. Add new layer,
move to top of sig and flood fill with color from tube.
Selections none. Adjust add remove noise, Add noise,
Gaussian 100% Monochrome checked. hit ok. add drop shadow.
Add proper copyright for an avitar. Name or First letter.
Eyecandy 4000 gradiant glow same settings as before in text.
Then added a drop shadow of 2, 2, 100, 4
This tutorial was written by Rebecca Townsley on 12/3/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Keeper of the Fireflies in the subject line
Can't wait to check them out!
Tuesday, November 27, 2012
I am trying a bit different way to write these.
Hoping maybe to be a bit easier to understand.
Also this tut tho using a Halloween kit..I tried to
make it look more magic then Halloween. Tho
I don't think I did that lol.
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit Making Magic by Disenando Scraps
You can get it HERE.
Tube of Choice. I am using Arthur Crowe.
You need a lic to use his work. You can get it and his work HERE.
Template of Choice. I am using Temp #27 by Twyzted T's Playroom.
You can get it HERE.
Font of choice I used Ambiance BT Swash and A Charming Font.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item.
Makinmagicdnscrapsbook - 25%
Makinmagicdnscrapsbookkitty - 30%
Makinmagicdnscrapsbottle - 30%
Makinmagicdnscrapsclock - 50%
Makinmagicdnscrapslight - 50%
Makinmagicdnscrapsribbons2 - 75%
Makinmagicdnscrapshallo - 75%
Makinmagicdnscrapspapers8 - 69%
Makinmagicdnscrapspapers15 - 69%
Makinmagicdnscrapspapers10 - 69%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open Template Shift+D to Duplicate.
Close original. Delete the info layer.
Resize by 89%
Select raster 10 - Selections all, float, defloat, invert
Copy Makinmagicdnscrapspapers10 Move over just a bit to left
Delete -Selections none add drop shadow.
Repeat for raster 4, copy of raster 4, and Copy (2) of raster 4
Select raster 2 - Selections all, float, defloat, invert
Copy Makinmagicdnscrapspapers15 Delete - Selections none
Add drop shadow.
Select Copy (3) of raster 2 Selections all, float, defloat,
Invert - Copy Makinmagicdnscrapspapers8 Delete - Selections none
Add drop shadow.
Using pick tool choose a color from tube.
Select Copy (2) of raster 2
Using Flood fill setting - match mode none, Tolerance 10,
use all layers unchecked, blend normal, opacity 100.
Flood fill the layer.
Using pick tool pick another color from tube
Select raster 3 Using Flood fill setting the same as above.
Floodfill the layer
Using Change to Target Brush and same color as above
Go over raster 5 and copy of raster 5. Add drop shadow to both layers.
Raster 6 and 7 add drop shadow
Copy and paste tube as new layer. May have to resize.
I did by 65%. Move to right of tag.**
Select Copy (2) of raster 2.
Copy and paste tube as new layer again.
Image, Flip horizontal. Blend mode Luminance (L)
Duplicate Blend mode hard light. Add drop shadow to
Luminance layer tube.
Select Copy (2) of raster 2 again Selections all, float,
defloat, invert. Delete on above 2 tube layers.
Select raster 6. Copy and paste Makinmagicdnscrapsribbons2
as new layer. Add drop shadow Move to top of tag.**
Duplicate, Image, Flip Horizontal.
Move to top layer. Copy and paste Makinmagicdnscrapslight
as new layer. Move to right bottom of tag.**
Add drop shadow.
Copy and paste Makinmagicdnscrapsbook as new layer.
Move to bottom right of tag just over the light**
Add drop shadow.
Copy and paste Makinmagicdnscrapsclock as new layer.
Move to bottom left of tag.**
Add drop shadow.
Copy and paste Makinmagicdnscrapsbookkitty as new layer.
Move to bottom left of tag just over the clock.**
Add drop shadow.
Copy and paste Makinmagicdnscrapsbottle as new layer.
Move to top left of tag.** Image, Flip horizontal,
Image Free rotate to the right by 30.
Copy and paste Makinmagicdnscrapshallo as new layer.
Flip horizontal.
If you wish, Using A Charming Font, Add the saying
Spiders, Snails, and PuppyDog Tails.
Add proper/clear copyright and Lic.# (If Needed)
Then add name using Ambiance BT Swash. To make look thicker
like mine I made stroke width same color as color for font
and a width of 2.
This tutorial was written by Rebecca Townsley on 11/27/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spiders, Snails, and PuppyDog tails in the subject line
Can't wait to check them out!
Thursday, November 22, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit Lolliepop Guild by Irish Princess Designs
Which is an Exclusive kit at Scrap Candy HERE.
Tube of Choice. I am using Jasmine Becket-Griffith.
You need a lic to use her work. You can get it and her work HERE.
Mask used MB and SW Mask 20 from Moonbeams and Spiderwebs.
You can get it HERE.
Font of choice I used . You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
New image 600x600
Open IBD_Frame2 Resize by 83%. Copy and paste as new layer.
Using magic Wand Click inside frame. Selections - expand by 2- invert.
Open paper of choice Resize by 69% Copy and paste as new layer.
Move to under frame layer, delete selections none.
Add drop shadow to Frame.
Open tube copy and paste as new layer. You may or may not need to resize.
This tube I did not have to resize. Place in center of Frame**
Duplicate Blend Hard light. Add drop shadow.
On frame Selections all , float, defloat.
On tube erase bottom to look like she is coming out of the frame.**
There will be over hang at the bottom.
Leave it :).
Open IBD_Bowlolly resize by 50% Copy and paste as new layer.
move to left of tag erase bottom to look like is it coming out
of the frame.** Selections none. Add drop shadow
Open IDB_HeartRibbon Copy and paste as new layer.
Move to bottom layer** add drop shadow.
Open IBD_CandyBox Resize by 30% Copy and paste as new layer.
Image - Flip horizontal Move to bottom right of tag. Add drop shadow.
Open IBD_Bonbon resize by 10% copy and paste as new layer.
Move to candy box.** Add drop shadow, duplicate 2 times and move them
around just a tad.**
Open IBD_Paper3 copy and paste as new layer.
Move to bottom layer. Open mask.
On Tag Layers, New mask layer, from image. Find the mask in the list
click ok merge layers.
Add proper/clear copyright and Lic.# (If Needed)
I added the saying DelightFall Fairies to it. and then a name.
This tutorial was written by Rebecca Townsley on 11/22/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sweet Candy in the subject line
Can't wait to check them out!
Thursday, November 15, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
FTU Kit Northern Light by Designs by Vaybs HERE.
Tube of Choice. I am using Steve Baier.
You need a lic to use his work. You can get it and his work HERE.
Font of choice I used Shelly Volante BT. You can get it HERE
Eye Candy 4000 Gradiant Glow.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
New image 600x250
Floodfill with any color Copy
Open DBV_NorthernLightPaper (6) Paste the white layer on it.
Selections all, float, Defloat, Select the paper layer and copy
Paste as new layer on the Sig tag. Delete white layer.
Open DBV_NLElement Resize by 75% Copy and paste as new layer.
Move to the left of tag and down.** Add drop shadow.
Open DBV_NLElement (32) Copy and paste as new layer.
Move to bottom left of tag.** Add drop shadow.
Now you want to Hide the white layer and Merge Visable.
Name this layer Background layer.
Open tube copy and paste as new layer. You may or may
not have to resize depending on the tube use. This one I used
I did not have to resize. Move to the right of the tag and down.**
Add drop shadow.
One the background Selections All. Select tube layer, then Selections invert
Delete. This will get rid of the over hang tube. Selections none.
Back on the background Selections All, Modify Contract by 5, invert
Add new rastor layer. Move this layer to the top. Invert, flood fill
with a color from tag. Selections none. Adjust, Add/remove noise,
add noise Gaussian, 50% Monochrome checked. ok. Add drop shadow.
Now go ahead and add proper/clear copyright and Lic.# (If Needed)
If you wish to add the Baby Its Cold Outside add it now. Then your name.
I used eyecandy 400 gradiant glow on the quote and the name.
Settings glow 3, soft corners 0, overall opacity 100, Draw only on outside checked.
Added a drop shadow of 2, 2, 100,5.
If you do not plan on animating then you are done with this part
of the Signature.
For the animation
Hide the background layer and your name Merge Visable.
Unhide the other layers. Over the background layer add new layer
floodfill with black. Duplicate 2 times. First layer name Snow 1
Middle Snow 2 and the top one snow 3.
Go to Snow 1 Adjust add/remove noise Add noise settings are
Random, 100%, Monochrome checked. Adjust, Blur, Blur.
Adjust, Brightness and contrast, levels, Settings are
RGB, 37, 58, 85 click ok Blend mode Screen.
Repeat on Snow 2 and Snow 3.
Hide the merged layer with the tube, Snow 2 and snow 3.
Copy merged. Open animation shop paste as new animation.
Hide Snow 1 and unhide Snow 2 Copy Merged and in animation
shop paste after current frame. Hide Snow 2 and unhide Snow 3.
Copy merged and paste after current frame. Edit select all.
You have your snowy background now.
In psp hide background and snow layers. Unhide the merged layer
with the tube. It should consist of Quote, Tube, and frame and copyright.
Paste in animation shop. Edit duplicate selected, repeat.
Edit Select all.
Now you want to make sure you are on F:1 Click and Drag it to F:1
of your snowy background making sure it is all in right place before
you let go.
If you plan on making this for more then one person I sugest you save it now
in animation. Then all you have to do is open it and add name like this..
Back in psp copy your name and repeat same steps and you did before
with the frame, tube, quote, copyright layer.
For the Avitar in PSP
On the sig tag (after you save it for a blank if your gonna save it)
Delete the top layer, name and the snow layers.
Using crop tool set it to W 150, H 150 Move to a part of
the background you want in the avi. Click on the check.
Image Flip Horizontal. Selections all, Modify, contract by 4, invert.
Add new rastor layer flood fill with same color used on Sig.
Selections none.
Adjust Add/remove noise, add noise, Settings
Gaussian, 50% Monochrome checked. ok. Add drop shadow.
Using same font as before add your First letter or if it fits
name which ever you prefer and save. Settings for gradiant glow
and drop shadow for this are the same as used on the name
and quote in the Sig.
This tutorial was written by Rebecca Townsley on 11/15/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Baby It's Cold Outside in the subject line
Can't wait to check them out!
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit DelightFall by Tasha's Playground HERE.
Tube of Choice. I am using Carrie Hall.
You need a lic to use her work. You can get it and her work *Coming Soon*
Mask used MB and SW Mask 47 from Moonbeams and Spiderwebs.
It says 46 but it is really 47. You can get it HERE.
Font of choice I used Saliere. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
New image 700x600
Open frame 1 copy and paste as new layer.
Using magic wand click on inside of frame. Selections, modify
expand by 2, invert.
Open paper8 resize by 76% Copy and paste as new layer.
Delete, Selections none move to under frame layer.
Copy tube and paste as new layer.Move to right a bit.
She will look like she is sitting on the frame.**
Add drop shadow. On frame Selections, all, float, defloat,
invert. On tube layer erase the part at bottom.**
Open berries2, resize by 75% copy and paste as new layer.
Move to left of frame.** Add drop shadow.
Open lights copy and paste as new layer. Move to under frame layer
and up a bit.** Add drop shadow of 0,0,50,5.
Open mushroom house resize by 50% copy and paste as new layer.
Move to top layer, down and over to right of frame.**
Add drop shadow.
Open sparkle 2 copy and paste as new layer on top.
Move to right of frame.** Duplicate, Image, flip horizontal.
Move to left of frame. Add drop shadow to Frame.
Open paper3 copy and paste as new layer move to bottom layer.
Open mask. Layers, new mask layer, from image click ok.
Merge group. Resize ALL layers by 86%.
Add proper/clear copyright and Lic.# (If Needed)
I added the saying DelightFall Fairies to it. and then a name.
This tutorial was written by Rebecca Townsley on 11/15/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU DelightFall Fairies in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)