Monday, August 13, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Skullz N Stripez by Tasha's Playground HERE.
Tube of Choice. I am using Vicki Yeager.
You need a lic to use her work. You can get it and her work *Coming Soon*.
Font of Choice I used Milton Burlesque .You can get it HERE.
Mask used 285 from Insatiable Dreams.You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new image 600x600.
Open frame4 copy and paste as new layer.
Using magic wand and click inside of frame4.
Selections - modify - expand by 2 selections - invert
Open paper14 resize by 86% copy and paste as new layer.
Move to bottom layer delete selections none.
add drop shadow to frame.
Open your tube copy and paste as new layer.
May have to resize to fit your needs.
Move a bit to the left** on top layer.
Add shadow.
Open cityscape copy and paste as new layer.
using pick tool rotate a bit to the left
to match the frame amd move down a tad
and below the frame layer.**
Erase the eccess from outside the frame.
add drop shadow color white -5, 2, 100, 11.
Open Pills Copy and paste as new layer over the frame.
move to bottom right corner of frame.
Open scatter copy and paste as new layer behind the paper cityscape layer.
Move up and to the right a bit.** Add drop shadow.
Duplicate - Image - flip horizontal then vertical. Move to bottom left**
Open Skull resize by 60% copy and paste as new layer over frame.
Move to top right corner of frame.** Add drop shadow.
On the frame layer selections - all - float - defloat - invert.
Open paper6 resize by 86% copy and paste as new layer.
Delete Blend mode soft light.
Open your mask. Layers New layer move to bottom
flood fill with either a paper or
color from tube. Layers new mask layer from image. Find the mask in the
list click on it then ok. Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name using a light color for inside of font and darker of that color
with a stroke of 2. Adding a drop shadow of white -2,3,68,8.
This tutorial was written by Rebecca Townsley on 8/13/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sophisticated Burlesque Result in the subject line
Can't wait to check them out!
Saturday, August 4, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Urban Addiction Abstract Creations HERE.
Tube of Choice. I am using Alehandra Vanhek.
You need a lic to use his work. You can get it and his work HERE.
Font of Choice I used wickhop handwriting.You can get it HERE.
Mask used MB and SW Mask 17 by Moonbeans and Spiderwebs.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open New Image 600x600
Open e43 copy and paste as new layer.
Go ahead and copy and paste your tube.Resize if you have to.
Place kinda at bottom of the city (e43).**
Add drop shadow.
Oprn e18 Copy and paste asnew layer. Resize by 45%.
Move to about the cnter of the tube. Add drop shadow.
Open e16 Copy and paste as new layer. Resize by 20%.
Move to just beside the bear (e18).**
Open e57 Copy and paste as new layer. Resize by 60%.
Move to top right of the buildings
them move to bottom to make bottom layer.** Add Drop Shadow.
You will see part of its paw sticking out...
I erased it. Now the bear looks like it is pearing over the
buildings. Watching and waiting.
Open e13 copy and paste as new layer. Resize by 20%.
Move to under the head of the tube. Bottom right of tag.**
added a drop shadow.
Open e9. COpy and paste as new layer. Resize by 20%.
Move to over the mps player (e16) amd on the mp3 player**
Selections all - float - defloat. using the eraser on the headphones (e9)
erase just the partat top to look like its wrapped around the mp3 player.
Add drop shadow.
Open e38 Copy and paste as new layer.
Move to top of tag. add drop shadow.
Open p4 resize by 88% Copy and pastre as new layer.
Move all way to bottomlayer for mask.
Layers - New mask Layer - From Image -
Choose the mask in the list. Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name and use a white dropshadow. of a thin graidant glow
if you have eyecandy 4000.
This tutorial was written by Rebecca Townsley on 8/4/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Urban Attitude Result in the subject line
Can't wait to check them out!
Friday, August 3, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Cobalt Butterfly from Irish Princess Designs HERE.
Tube of Choice. I am using Barbara Jensen.
You need a lic to use her work. You can get it and her work HERE.
Font of Choice I used One Starry Night.You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open New Image 600x600
Open IBD_Element2 Copy and paste as new layer. Resize by 95%
Move to bottom of tag.**
Open IBD_Element7 Copy and paste as new layer. Resize by 50%
Move to left of the grass and in layers make it the layer
under the grass.** I added a drop shadow you can if you like
or leave it as is.
Open IBD_Element32 Copy and paste as new layer. Resize by 15%
Move to the bottom left of tag.** Add drop shadow. Duplicate
resize by 85% using pick tool turn just a bit move slightly
down and to the right** Duplicate that and move slightly up
and to the right and in layers put under the bigger rose layer.**
Merge Roses.
Open IBD_Element36 Copy and paste as new layer. Resize by 25%.
Move to the right of the roses as layers move to under roses layer.
Add drop Shadow.
Open IBD_Element39 Copy and paste as new layer. Resize by 75%
Move to right of tag using as top layer** Duplicate Merge down.
Duplicate Image Flip Horizontal move over to left of tag.**
Open your tube copy and paste as new layer. Resize if you need to.
Move to right of tag and under the sparkle layers.
Add Drop shadow settings 2, 3, 100, 8.
Open IBD_Element6 Copy and paste as new layer. Resize by 30%.
Move to upper right infront of the tube. Kinda looks like
she is watching them flay away. Add drop shadow.
Open IBD_Element55 Copy and paste as new layer. Resize by 90%.
Move to very bottom of layers and kinda center but tothe left just a tad.**
Add proper/clear copyright and Lic.# (If Needed)
And then a name.
This tutorial was written by Rebecca Townsley on 8/3/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Blue Summer Nights Result in the subject line
Can't wait to check them out!
Friday, July 13, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
FTU Rockin' Irish from Irish Princess Designs HERE.
Tube of Choice. I am using Susan Justice.
You need a lic to use her work. You can get it and her work at *Coming Soon*
Font Of Choice I used space pontiff. You can get it HERE.
Template used Template 69 from Melissaz Creationz HERE.
Mask is GrungeMask4byJenny from Creative Misfits blog HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template shift+d to duplicate close original.
Delete the Info layer on top.
On Rastor 3 select all - float - defloat - invert.
Open paper13 resize by 60% copy and paste as new layer
delete - selections none.
On Rastor 4 select all - float - defloat - invert.
Open paper2 resize by 60% copy and paste as new layer
delete - selections none.
Pick a color from the tube. Using change to target brush
On Rastor 8, Rastor 5, and the top small dark rectangle boxes.
On Rastor 5 - Adjust - Add/remove noise - add noise.
Effects - Inner Bevel to your liking add drop shadow.
Add drop shadow to Rastor 8 as well.
On the small dark rectangles go to effects - textures
weave using gap size 6, width 6, Opacity 100 color for weave
a color from tube. Click ok. Add drop shadow.
On Rastor 2 and the two long rectangle frames
I used a color from the skin of the tube
and change to target brush then added a drop shadow to both.
On Rastor 6 useing a color from the tube and change to target brush.
Repeat for the merger dots. add drop shadow to dots.
Open tube copy and paste as new layer on top. Move to left of tag.**
Add drop shadow.
Open Frame resize by 65% copy and paste as new layer under the tube layer.
Open Guitar resize by 45% copy and paste as new layer.
Place to right of tag.** Add drop shadow.
Open Music 1 resize by 25% copy and paste over the square layer. using pick tool
turn it a bit. Add drop shadow Duplicate using pick tool turn in oppisite direction.
On the square layer - Effects - tectures - fur using
blur 0, length 100, density 100, trans. 0. Repeat.
Open flames resize by 55% copy and paste as new layer. Add drop shadow.
Move to very bottom layer. and then up to top of tag a bit. Duplicate
Image flip vertical move to bottom of tag.
For mask open paper 16 and paste as new layer. Move to bottom layer.
Layers - New mask layer - from image - find the mask on the list and click ok.
Merge group. Opacity to 50%
Add proper/clear copyright and Lic.# (If Needed)
Add name and were done. For the name i used an inner bevel as
First row going down 2, 24
Second Row gowing down 30, 18, 4, 31
Third row going down color white, 298, 40, 40
add drop shadow done.
This tutorial was written by Rebecca Townsley on 7/13/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Irish Chick Result in the subject line
Can't wait to check them out!
Thursday, June 21, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Chola Beauty from Rabid Designs HERE.
Tube of Choice with a half body layer. I am using Cristian Gonzalez
You need a lic to use his work. You can get it and his work at *Coming Soon*.
Font Of Choice I used Witched .You can get it HERE.
Mask #1 from Scrap Dimensions HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with new rastor of 600x600.
Open f8 copy and paste as new layer. Resize by 85%.
Using magic wand click on inside of frame. Selections
modify - expand by 2 Selections - invert.
Open p8 resize by 72% copy and paste as new layer.
Move to under frame delete.
Open tube copy and paste as new layer. Image - flip horizontal.
Add drop shadow and move to left of frame. Don't worry about the bottom.
We will be adding elements so you wont see.
Open e8 copy and paste as new layer. Resize by 45%. Move to bottom left of tag.
add drop shadow. Duplicate resize by 75% and move down and to left just a tad.**
On top strawberry Merge down resize by 75% move down and to left**
Open e40 copy and paste as new layer. Resize by 50% move to bottom left of tag
under the strawberries layer. add drop shadow.
Open e54 copy and paste as new layer. Resize by 50%. Move down and under the
condom layer.** Add drop shadow.
Open e47 copy and paste as new layer. Resize by 75%. Move to right of tag to look
like it is hanging from th frame.** add drop shadow
Using a smaller version of the tube copy and paste as new layer under the frame.
Move around a bit** Erase any overhang from the tube. Change opacity to 57
and change blend to luminance (L)
Open e49 copy and paste as new layer. Move to over
heart chain layer. Resize by 75%
and place in t he heart.** Add drop shadow.
Open e16 copy and paste as new layer resize by 50%
and place at top of heart chain.**
Open p13 copy and paste as new layer. Move to bottom layer.
Open mask. Layers - new mask layer - from image find the mask in the list
click ok merge group. May need to resize it a bit bigger so you can see it.
Resize all layers by 96%.
Unless you want it to stay 600x600.
Add proper/clear copyright and Lic.# (If Needed)
Add name and your done. If you wish I used Eyecandy 4000 gradiant glow
on the name. 8, 25, 100 color white. But I know some may not have it.
This tutorial was written by Rebecca Townsley on 6/21/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Crimson Beauty Result in the subject line
Can't wait to check them out!
Wednesday, June 20, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU Fireworks from Ditzy Designs HERE.
Tube of Choice . I am using Barbara Jensen
You need a lic to use her work. You can get it and her work HERE.
Font Of Choice I used is called Cocktail Script .You can get it HERE.
Template used tem2_ajd. It is int the first set of templates
at Creative Misfits Blog. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open Template then hit Shift+D to Duplicate it. Close original.
Delete the credits and the pink strip layers.
Use magic wand on Copia de Vector 1. Open Paper 10 resize by 70%.
Copy and paste as new layer. Selections - Invert - delete Selections - none.
Go to Grupo - Trama 1 layer selections all - float - defloat - invert
Open Paper 11 Copy and paste as new layer - Delete. Set Optacity to 55
Delete Grupo - Trama 1 layer.
Back to top layer. Open your tube, copy and paste as new layer.
May need to resize tube to your liking. I resized mine by 75%
Then Image - Flip Horizontal. And place a tad to the left of tag.**
Add Drop Shadow.
Using a color from the tube (I used red)and the Change to target brush go over
the square frames. Add drop shadow to frames.
Repeat for layers Copia (3) de Vector 2 and Copia (3) de Vector 2.
On the top sqaure using magic wand click on the square. Selections Invert.
Open paper 9 Copy and paste as new layer. Delete.
Repeat for the other 3 squares. Delete original squares.
Pick another color from tube. (Being as I am doing this for the 4th of July
I used blue.) Using Change to Target brush go over Trama 2 layer, the Copia
de Vector 1 layer and Trama 4 layer.
Using magic wand click inside Tarama 3 Selections - invert
Open paper 8 Copy and paste as new layer - Delete.
Repeat for Copia de Vector 2 later.
Open Fireworks 1 Copy and paste as new layer under tube
and to the top left of tag** Open Flower 1 Copy and paste as new layer.
Resize by 75% Copy and paste as new layer to bottom right of tag.
Add drop shadow.
Open USA wordart Copy and paste as new layer. Resize by 60%
Place in top right of tag add a drop shadow of 2,5,79,10.
You will need to resize the tag all layers as it should only be no
bigger then 600x600 for most places I resized by 86%
Add proper/clear copyright and Lic.# (If Needed)
Add name and your done. To get the name Like I have it
Just play with the Inner Bevel till you have what you like.
This tutorial was written by Rebecca Townsley on 6/20/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sexy in the USA Result in the subject line
Can't wait to check them out!
Thursday, June 7, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
FTU Misfit Spring from Tasha's Playground HERE.
Tube of Choice . I am using Rachael Tallamy.
You need a lic to use her work. You can get it and her work at HERE.
Font of Choice I used Easy Street.You can get it HERE.
Template used Temp_23 by Twyzted T's Playroom. You can get it HERE.
Mask I used MB and SW Mask 5 by Moonbeams ans Spiderwebs.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template Shift+D Close the original.
Image - Canvas resize to 806x581
Using magic wand click on raster 6 Selections - invert
Open paper7 copy and paste as new layer delete.
Add drop shadow and erase any overhang from shadow.
Using magic wand click on raster 2 Selections - invert
Open paper8 copy and paste as new layer delete.
Add drop shadow and erase any overhang from shadow.
Open Tube resize by 75% copy and paste as new layer.
Place to left to look like she is sitting on bottom of box.**
Add drop shadow on seperate layer and erase the part of the
shadow from the wings.Then merge the tube layer down with the shadow layer.
Take magic wand and click on Copy of Raster 3.
Erase the part of the tube thats in that box. Keep selected.
Copy tube and paste again over copy of raster 3 image resize by 125%
move to right just a bit.** Selections - invert - delete. Selections none.
Using a light color from your tube. Flood fill raster 3 and copy of raster 3.
On raster 5 Adjust - add remove noise - add noise - 100% Add drop shadow.
Repeat for raster 4
On rastor 8 flood fill with color from tube Adjust
add/remove noise - add noise 100% add drop shadow
Repeat for following layer but use different colors from tube.
Rastor 9, Copy of rastor 9 , Copy(2) of raster 9,
copy(3) of rastor 9, copy(4) of rastor 9, rasters 7, 13,10 and 14.
I deleted layer 11 and 12.
Open flowers copy and paste as new layer at bottom right of tag.**
Add drop shadow Duplicate - image flip horizontal - flip vertical - move to
top left of tag then to under the tube layer.
Open bird resize by 75% copy and paste as new layer. Image - Flip horizontal
move to top right of tag** Add drop shadow.
Resize all layers by 71% so its not to big.
Open paper6 copy and paste as new layer and move all way to bottom.
Open your mask. Layers - New Mask Layer - from Image.
Find the mask in the list hit ok then Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name and your done.
This tutorial was written by Rebecca Townsley on 6/7/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spring Fae Result in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)