Hello everyone! This is my first ever video tutorial. I am learning as I go with this one. There are no instructions as the video is pretty self explanatory. Next one I may or may not talk, have not gotten up the nerve for that yet. Looking for music I can use for them so it is not just plain silence. Any ideas on them for the future, feel free to leave in the comments here or on YouTube. Now, on to the details of what was used.
Kit used is by Wicked Princess Scraps called Mystical Moments. The kit has 71 elements, 7 frames, 10 papers, and 1 word art. You can get it at her store. Wicked Princess Scraps. Tube used is an exclusive at Pics For Design, from the Exclusive Club. Mask used is Mask 41 MB and SW by Moonbeams and Spiderwebs. Font used is Shelley Script at My
These two tags were made using one of Wicked Princess Scraps
Image Based Kits she has at CDO. This kit is called Marika-67-2
With 20 elements, 6 papers, 2 frames, and 1 word art,
There are many possibilities!
You can grab the kit at CDO!
This wonderful kit "Mystical Moments" has a total 71 elements, 10 papers, and 1 word art! Lots of magical pieces!!
This tut was made using PSP 2022 Ultimate.
And knowledge of PSP 2022 Ultimate.
Supplies needed
Tube of choice, I used "21-2-SybileArt" by "Sybile Art" at CDO.
PTU kit "Mystical Moments" by "Wicked Princess Scraps".
Mask "DBD Mask 25" by "Designz by BabyDragon".
Font of choice. I used "Rage Italic"at DaFont.
Most elements used are resized to fit where I needed them to go. Below is the
list of elements used and the percentage I resized them by. If there is no
percentage, the element was not resized. It may help if you go ahead and resize
each element.
WP-MYSTICALMOMENTS_KATHARINE_HEARTS - 75%
21-2-SybileArt tube - 50% resizing will depend on size of tube you use.
WP_MYSTICALMOMENTS_KATHARINE_DECO2
WP_MYSTICALMOMENTS_KATHARINE_FLOWER15 - 75%
WP_MYSTICALMOMENTS_KATHARINE_JAR - 50%
WP_MYSTICALMOMENTS_KATHARINE_CRYSTALBALL - 50%
WP_MYSTICALMOMENTS_KATHARINE_2 (Paper) - 75%
DBD Mask 25
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 Color Black unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600x600.
Copy and paste paper as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
1.Copy and paste WP-MYSTICALMOMENTS_KATHARINE_HEARTS as new layer, add drop shadow
2.Copy and paste tube as new layer**. Add drop shadow.
3.Copy and Paste WP_MYSTICALMOMENTS_KATHARINE_DECO2 as new layer and move to above
mask layer.
4.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_FLOWER15 as new layer. Move to under
tube layer and add drop shadow.
5.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_JAR as new layer. Move to under hearts
layer**. Add drop shadow.
6.Copy and paste WP_MYSTICALMOMENTS_KATHARINE_CRYSTALBALL as new layer**.
7.Add your wording and or name.
Add proper copyright. url and Lic if required.
With just using a kit and this being a Facebook banner you would put
Kit "Mystical Moments" by Wicked Princess Scraps
Add name and your done.
This tutorial "Mystik Dragon" was written by Rebecca Albertson on 02/12/22.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Mystik Dragon" tut in the subject line.
Can't wait to check them out!
It has been awhile .. Like 3 years since I have done a tutorial. I was in online college going for my Bachelors in Science of Sociology with Emphasis in Social Work degree. I have since graduated and also been promoted at my job. I do however have time now to start doing some tuts. I am not on any CT teams at the moment. These are just random tuts of stuff I have.
This tut was made using PSP 2022 Ultimate.
And knowledge of PSP 2022 Ultimate.
With Windows 10.
Supplies needed
Tube of choice, I used "Vinegar 7-1" by "Vinegar". You can get her at CDO.
FTU/PTU kit "The Hunt" by "Wicked Princess Scraps".
Mask "MB and SW Mask 129" by "Moonbeams and Spiderwebs".
Font of choice. I used "HalloWitchZ" from Dafont.
Most elements used are resized to fit where I needed them to go. Below is the
list of elements used and the percentage I resized them by. If there is no
percentage, the element was not resized. It may help if you go ahead and resize
each element.
Tube of Choice
WP_THT_FRAME8 - 60%
WP_THT_MESH - 60%
WP_THT_BLOODSPATTERS - 85%
WP_THT_TREE3 - 65%
WP_THT_WORDART2 - 45%
WP_THT_SKULL - 20%
WP_THT_PP6 - 76%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 Color Black unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600 .
Copy and paste WP_THT_PP6 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
1. Copy and paste WP_THT_FRAME8 as a new layer. Add drop shadow.
2. Copy and paste tube as new layer. Move down to below the WP_THT_FRAME8
layer. Add drop shadow.
3. On the tube, selections, select all, select float, select defloat. Now
click on thge frame layer and using the eraser tool to erase just the part
of the layer infront of the tube. Selections - Select none. Gives the tube
the look of coming out of the frame.
4. Copy and paste WP_THT_MESH as new layer and move to below the tube layer.
5. Copy and paste the WP_THT_BLOODSPLATTEERS as a new layer. Change the
opacity to 59 and move to above the WP_THT_MESH layer.
6. Copy and paste WP_THT_TREE3 as new layer. Move to top layer above frame.**
Add drop shadow.
7. Copy and paste WP_THT_WORDART2 as new layer. Add drop shadow, change
color of shadow to white.** Once moved to top corner, duplicate layer,
then merge down.
8. Copy and paste WP_THT_SKULL as new layer. ** Add drop shadow.
9. Copy and paste WP_THT_PP6 as new layer. Move to bottom layer.
Layers, New Mask layer. Find the mask in the list Click ok. Merge group
Add proper copyright. url and Lic if required.
With just using a kit you would put Kit "The Hunt" by Wicked Princess Scraps
Add name and your done.
This tutorial "Get Out" was written by Rebecca Albertson on 10/8/21.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied but a link can be shared in groups
for challenges and what not.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Get Out" tut in the subject line.
Can't wait to check them out!
And knowledge of PSPx7.
Supplies needed
PTU kit "Amok Amok Amok" by "Creative Scraps by Crys".
Sold at the following Stores.
Font of choice. I used "Vladimir Script".
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
AAA_Paper_2 = 75%
MB and SW Mask 84
AAA_Element_28 (tree) = 90%
AAA_Element_3 (black hair sister) = 50%
AAA_Element_2 (blonde hair sister) = 50%
AAA_Element_1 (red hair sister) = 50%
AAA_Element_12 (cauldron) = 75%
AAA_Element_40 (sparkles)
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600x600.
Copy and paste AAA_Paper_2 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group.
Copy and paste AAA_Element_28 (tree)as new layer.
Copy and paste AAA_Element_3 (black hair sister) as new layer and move to left.** Add drop shadow.
Copy and paste AAA_Element_2 (blonde hair sister) as new layer and move to right.** Add drop shadow.
Copy and paste AAA_Element_1 (red hair sister) as new layer. Make sure she is center of the other two.** Add drop shadow.
Copy and paste AAA_Element_12 (cauldron) as new layer. Move down a bit.**
Copy and paste AAA_Element_40 (sparkles) as new layer.
Shadow I used on words is as follows 2.2.100.3
Add proper copyright. url and Lic if required.
With just using a kit like I did with this one, you would put
Kit "Amok Amok Amok" by Creative Scraps by Crys www.sinfullycreativescraps.blogspot.com
Add name and your done.
This tutorial "I put a Spell on you" was written by Rebecca Albertson on 10/24/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"I put a Spell on you" tut in the subject line.
Can't wait to check them out!
Dances in the Rain Scraps
Freeks Creations
And knowledge of PSPx7.
Supplies needed
PTU kit "Fantasy Forest" by "Freeks Creations". You can get it at the following stores.
Scraps and Company
Dance in the Rain Scraps
Tube of choice, I used "Hedgies in Love" by "Laguna".
You can get it at Pics For Design.
Mask "Sparkle Floral Mask 2017 LNL" by "Leather and Lace Ads".
Font of choice. I used "Country Side" by Billy Argel.
This is a personal use only font.
You can get font at Font Space.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Paper5- 75%
Splash
Path
Swing
Vines- 60%
Mushroom- 30%
Mushroom2- 20%
Fairy- 50%
Tube- Resize to fit
Light
Glitter
Wordart
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600x600.
Copy and paste Paper5 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group.
Copy and paste Splash as new layer.
Copy and paste Path as new layer. Move down just a tad.**
Copy and paste Swing as new layer. Move to the right just a tad.**
Add a drop shadow.**
Copy and paste Vines as new layer. Image- Flip- Horizontal.
Move to in front of the swing.**
Add a drop shadow.
Copy and paste Mushroom as new layer.
Move to bottom right in front of vines a tad.**
Add a drop shadow.
Copy and paste Mushroom2 as new layer.
Move to bottom right of first mushroom.**
Add a drop shadow.
Copy and paste Fairy as new layer. Move to left of mushrooms a bit.**
Add a drop shadow.
Copy and paste Light as new layer. Move to left of tag.**
Copy and paste Tube as new layer. Move it to the bottom left of tag.**
Copy and paste Glitter as new layer.
Copy and paste Wordart as new layer. Move to bottom of tag.**
Add a drop shadow of 2.2.100.6.
Add proper copyright. url and Lic if required.
Add name and your done. With the name on this one I used a color from the kit with a white outline stroke of 1. and add a drop shadow of 2.2.100.6
This tutorial "Hedge Hog Magik Love" was written by Rebecca Albertson on 8/1/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Hedge Hog Magik Love" tut in the subject line.
Can't wait to check them out!
And knowledge of PSPx9.
Supplies needed
PTU kit "Country Kitchen" by "Creative Scraps by Crys".
Mask "MB and SW Mask 84" by "Moonbeams and Spiderwebs".
Font of choice. I used "Script MT Bold". I think it is one that comes with every computer,
but in case you do not have it a similar font can be gotten HERE.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
CK_Paper (11) - 75%
CG_Element (101) - 96%
CG_Element (106) - 96%
CG_Element (24) - 30%
Tube of choice resized to fit
CG_Element (108) - 70%
CG_Element (5) - 75%
CG_Element (84) - 30%
CG_Element (39) - 15%
CG_Element (33) - 30%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600x600.
Copy and paste CK_Paper (11) as new layer. Layers, New Mask layer, from image, Choose MB and SW Mask 84, invert mask data unchecked, click ok and then merge group. Find the mask in the list Click ok. Merge group
Copy and paste CG_Element (101) as new layer. Add a drop shadow of 0.0.100.0.
Copy and paste CG_Element (106) as new layer.
Copy and paste CG_Element (24) as new layer. Move to the top left of the tag.** Add a drop shadow.
Copy and paste tube as new layer. Add a drop shadow.
Copy and paste CG_Element (108) as new layer. Move to left of tag.** Add drop shadow. Duplicate image, Image - Mirror Horizontal.
Copy and paste CG_Element (5) as new layer. Images - Free rotate to the left at 90°. Move to bottom of tag.** Add a drop shadow.
Copy and paste CG_Element (84) as new layer. Move to bottom left of tag.** Add a drop shadow.
Copy and paste CG_Element (39) as new layer. Move to in front of tea pot.** Add a drop shadow.
Copy and paste CG_Element (33) as new layer. Move to in front of the mug.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial "Tea Time" was written by Rebecca Albertson on 7/23/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Tea Time" tut in the subject line.
Can't wait to check them out!
Supplies needed
PTU kit "America's Birthday" by "Freeks Creations".
Scraps and Company
Dance in the Rain Scraps
Follow her on her blog is HERE for updates on new stuff.
Fonts of choice. I used "Beautiful Lovers", which is personal use unless you contact the designer for permission and, "Wakanda", which is also personal use unless you contact the designer for permission. Both which are at Fontspace.com
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Splash
Confetti
Balloon
Frame2 - 85%
Tube - resized to fit**
Leaves2
Glitter2
Butterfly - 40%
Eagle - 40%
Firework - 40%
Firework2 - 35%
And knowledge of PSPx9.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
AA_Paper_3
AA_Element_28 (Colored Swirl Clouds)
AA_Paper_2
AA_Element_18
AA_Frame_2
AA_Element_28
AA_Element_2 - 75%
AA_Element_57 - 50%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 851 x 315 as we are doing a Facebook timeline banner.
Using the AA_Paper_3, go to your image you are working on. Click on your flood tool. In materials section, change it from color to pattern, right click on the pattern box and click other, than find the paper in the choices and click on it, then click ok. Now using your flood tool, just click inside the image and it will fill the image with the paper.
Add proper copyright. url and Lic if required.
With just using a kit and this being a Facebook banner you would put
Kit "Attitude Adjustment" by Creative Scraps by Crys
Add name and your done.
This tutorial "The Unicorns Made Me Do It" was written by
Rebecca Albertson on 6/28/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"The Unicorns Made Me Do It" tut in the subject line.
Can't wait to check them out!
And knowledge of PSPx7.
Supplies needed
Tube of choice. I used one by Elizabeth Austin.
You need a license to use her work. You can get it
and her work here at Creative Design Outlet.
PTU kit Fairy Dreams by Pink at Pics for Design.
Mask of choice. I used MB and SW Mask 84 by Moonbeams and Spiderwebs.
Font of choice. I used Delta Hey Max Nine.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
P-Paper FG-Frame E- Elements
KezTD P12 - 86%
MB and SW Mask 84
KezTD FG
Tube - 75%
KezTD E1 - 25%
KezTD E68 - 75%
KezTD E12 - 30%
KEZTD E12 - 20%
KezTD E51 - 30%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste KezTD P12 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste KezTD FG as new layer. Add drop shadow of 0,0,100,8.
Copy and paste tube as new layer. Move to center of frame.**
Add drop shadow of 0,0,100,20.
Copy and paste KezTD E1 as new layer. Move to top left of tag. Images, Flip, Horizontal.
Copy and paste KezTD E68 as new layer. Place at bottom Left of tube.** Add drop shadow
of 0,0,100,8. Duplicate, Images, Mirror, Horizontal.
Copy and paste KezTD E12 30% resize as new layer. Move to Bottom left of the Leaf.** Add
drop Shadow of 0,0,100,8.
Copy and paste KezTD E12 20% resize as new layer. Place to right of the first bird.** Add
drop shadow of 0,0,100,8.
Copy and paste KezTD E51 as new layer. Move to top right of tag.** Images, Flip, Horizontal.
Add drop shadow of 0,0,100,8.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 6/3/16.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Fairy Dreams in the subject line
Can't wait to check them out!
