Saturday, January 28, 2012



This tut was made using PSPx2
And knowledge of PSPx2.

Supplies needed
PTU G-Gurl from Tasha's Playground HERE.
Tube of Choice. I used Nicholas Garton GartArt.
You need a lic to use his work.
You can get it and his work at *Coming Soon*
Font Of Choice I used Delinquente Font. You can get it HERE.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

File New 600x600
Open frame1 resize by 85% copy and paste as new layer
Open city scape resize by 75% copy and paste as new layer under the frame.
Move down just a bit.** Click inside the frame with the magic wand
Selections - Contract by 2 - invert on city scape layer hit delete
Open paper 13 resize by 75% copy and paste as new layer
under city scape - Delete
Open sparkle4 resize bu 90% copy and paste as new layer under the frame
move to top a bit** - Delete - Selections none.

Copy and paste tube layer place slightly to right of tag over frame
You may have some of the pole to erase at top. Add drop shadow

Open car copy and paste as new layer under the frame layer. Move slightly to left**
erase any overhang.

Open dice resize by 50% copy and paste as new layer over frame.
Place at bottom left corner to where it looks like they were rolled out of the frame.
Add drop shadow.

Open bling spiral resize by 115% copy and paste as new layer.
Make bottom layer. Add drop Shadow.

Open charm2 resize by 50% copy and paste as new layer. Place at top left corner
of frame add drop shadow.

Open splat2 copy and paste as new layer place it up and to the left**, move to bottom layer
Duplicate Image - mirror - flip

Resize all layers by 96% if you wish it to be smaller.
Add proper/clear copyright and Lic.# (If Needed)

For the name after putting it in I did this. Selesctions - all - float - defloat
Expand by 2. Move down to below name. Use paintbrush fill with white. Adjust - Add/remove
noise - Add noise - 100% Selections none. Add drop shadow.


This tutorial was written by Rebecca Townsley on 1/28/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU G Gurl Swag Tut Result in the subject line
Can't wait to check them out!

Saturday, January 21, 2012



This tut was made using PSPx2
And knowledge of PSPx2.

Supplies needed 
PTU Sorrowful You from Tasha's Playground HERE.
Tube of Choice. I used Tony Tzanoukakis. 
You need a lic to use his work. You can get it and his work at
his store HERE.
Template 43 from Blissfully Beth. You can get it HERE.
Font Of Choice I used Jellyka Waterways Seafaers. You can get it HERE.


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open the template and duplicate it by hitting Shift+D
Close original. Delete the url info layer.
CLick on O Frame background - selections - select all - 
float - deflaot - invert 
Open paper7 resize by 85% copy and paste as new layer. Delete. Selections None.
Delete original layer.

Merge Stripe layer 1, 2, and 3 together.
Using magic wand Mode - Add(shift) MAtch mode RGB Value 
Click inside each of the Stripes you just merged.
Open paper2 Resize by 85% Copy and paste as new layer
Selections - Invert - Delete Selections None 

On Original Stripe layer Selections - All - Float - 
Defloat Selections none. Flood fill with color from tube.
Add drop shadow I used white in this one.
Adjust Add/Remove Noise - Add noise - Uniform 50% Monochrome Checked
Add Drop shadow

Click on O frame Selections - All - float - defloat - 
Flood fill with a light color from tube
Adjust Add/Remove Noise - Add noise - Uniform 50% Monochrome Checked
Add Drop shadow

Click on Black Stripes layer 
Adjust Add/Remove Noise - Add noise - Uniform 50% Monochrome Checked
Add Drop shadow

Copy and paste tube under your O background layer. Place to where it 
looks like its coming out of the O.** Selections All - float - defloat.
Use eraser and erase the part of the O Background and O frame 
where tube is coming out of. Add Drop shadow to tube.

Open wings copy and paste as new layer move to under black stripes and slighty to top
of template.** Add drop shadow.

Open sparkles copy and paste as new layer on top. Move slightly to bottom left.
Duplicate - image - mirror. Merge down. Duplicate - Image - flip Merge down.

Open spider copy and paste as new layer move to bottom left of tag **
and then move to below the sparkle layer. 

Resize all layers by 96% 
Add proper/clear copyright and Lic.# (If Needed)
Add name and drop shadow. 
(fell free to play around with the name to make it how you would like it.)

This tutorial was written by Rebecca Townsley on 1/21/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Black Widow Tut Result in the subject line
Can't wait to check them out!




Saturday, January 14, 2012




This tut was made using PSPx2
And knowledge of PSPx2.

Supplies needed 
PTU Dark Gothic Love from Disenando Scraps HERE.
Tube of Choice One with a close up. I used Camilla Drakenborg. 
You need a lic to use her work. You can get it and her work The PSP Project
Font Of Choice I used GraffitiThree.


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start with new image 600x250

Open darkgothiclovefgpaper30 and go to materials and choose it as your pattern.
Flood fill new image with the pattern.

Open darkgothiclovefghearts2 copy and paste as new layer.
Add Drop shadow.
Copy and paste Tube(b) as new layer move to left some and a bit to bottom**
Add drop shadow.

Open darkgothiclovefvchainshearts copy and paste as new layer.
Copy tube again paste as new layer mirror move face to under the heart part
of charm. Resize by 120. Erase everything but whats shows in the heart.
Duplicate Blend hardlight.

Add proper/clear copyright, URL, and Lic.# (If Needed)
Add name using darkgothiclovefvpaper17 as the pattern Black as a trim.
Add drop shadow of 2,2,100,10. 

For the Avatar I merged all layers on Sig (make sure sig is saved)
and just took a piece of the tag added a frame like I did with Sig. 
Same setting for the Name as in Sig Add drop shadow to frame and name. 
Add proper/clear copyright and Lic.# (If Needed)

I played around with it in Animation shop afterwards and I like the results.
Just let your imagination wonder!

Photobucket

This tutorial was written by Rebecca Townsley on 1/14/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Devlish Valentine Tut Result in the subject line
Can't wait to check them out