Thursday, June 21, 2012



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 
PTU Chola Beauty from Rabid Designs HERE.
Tube of Choice with a half body layer. I am using Cristian Gonzalez
You need a lic to use his work. You can get it and his work at *Coming Soon*.
Font Of Choice I used Witched .You can get it HERE.
Mask #1 from Scrap Dimensions HERE.


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with new rastor of 600x600.
Open f8 copy and paste as new layer. Resize by 85%.

Using magic wand click on inside of frame. Selections  
modify - expand by 2 Selections - invert.
Open p8 resize by 72% copy and paste as new layer. 
Move to under frame delete.

Open tube copy and paste as new layer. Image - flip horizontal.
Add drop shadow and move to left of frame. Don't worry about the bottom.
We will be adding elements so you wont see.

Open e8 copy and paste as new layer. Resize by 45%. Move to bottom left of tag.
add drop shadow. Duplicate resize by 75% and move down and to left just a tad.**
On top strawberry Merge down resize by 75% move down and to left**

Open e40 copy and paste as new layer. Resize by 50% move to bottom left of tag
under the strawberries layer. add drop shadow.

Open e54 copy and paste as new layer. Resize by 50%. Move down and under the 
condom layer.** Add drop shadow.

Open e47 copy and paste as new layer. Resize by 75%. Move to right of tag to look
like it is hanging from th frame.** add drop shadow

Using a smaller version  of the tube copy and paste as new layer under the frame. 
Move around a bit** Erase any overhang from the tube. Change opacity to 57 
and change blend to luminance (L)

Open e49 copy and paste as new layer. Move to over 
heart chain layer. Resize by 75%
and place in t he heart.** Add drop shadow.

Open e16 copy and paste as new layer resize by 50% 
and place at top of heart chain.**

Open p13 copy and paste as new layer. Move to bottom  layer.
Open mask. Layers - new mask layer - from image find the mask in the list
click ok merge group. May need to resize it a bit bigger so you can see it.

Resize all layers by 96%. 
Unless you want it to stay 600x600.

Add proper/clear copyright and Lic.# (If Needed)
Add name and your done. If you wish I used Eyecandy 4000 gradiant glow 
on the name. 8, 25, 100 color white. But I know some may not have it.

This tutorial was written by Rebecca Townsley on 6/21/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Crimson Beauty Result in the subject line
Can't wait to check them out!

Wednesday, June 20, 2012



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 
PTU Fireworks from Ditzy Designs HERE.
Tube of Choice . I am using Barbara Jensen
You need a lic to use her work. You can get it and her work HERE.
Font Of Choice I used is called Cocktail Script .You can get it HERE.
Template used tem2_ajd. It is int the first set of templates
at Creative Misfits Blog. You can get it HERE.


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open Template then hit Shift+D to Duplicate it. Close original.
Delete the credits and the pink strip layers.

Use magic wand on Copia de Vector 1. Open Paper 10 resize by 70%.
Copy and paste as new layer. Selections - Invert - delete Selections - none.

Go to Grupo - Trama 1 layer selections all - float - defloat - invert
Open Paper 11 Copy and paste as new layer - Delete. Set Optacity to 55
Delete Grupo - Trama 1 layer.

Back to top layer. Open your tube, copy and paste as new layer. 
May need to resize tube to your liking. I resized mine by 75%
Then Image - Flip Horizontal. And place a tad to the left of tag.**
Add Drop Shadow.

Using a color from the tube (I used red)and the Change to target brush go over 
the square frames. Add drop shadow to frames.
Repeat for layers Copia (3) de Vector 2 and Copia (3) de Vector 2.

On the top sqaure using magic wand click on the square. Selections Invert.
Open paper 9 Copy and paste as new layer. Delete.
Repeat for the other 3 squares. Delete original squares.

Pick another color from tube. (Being as I am doing this for the 4th of July
I used blue.) Using Change to Target brush go over Trama 2 layer, the Copia 
de Vector 1 layer and Trama 4 layer.

Using magic wand click inside Tarama 3 Selections - invert
Open paper 8 Copy and paste as new layer - Delete. 
Repeat for Copia de Vector 2 later.

Open Fireworks 1 Copy and paste as new layer under tube 
and to the top left of tag** Open Flower 1 Copy and paste as new layer.
Resize by 75% Copy and paste as new layer to bottom right of tag.
Add drop shadow.

Open USA wordart Copy and paste as new layer. Resize by 60% 
Place in top right of tag add a drop shadow of 2,5,79,10.
You will need to resize the tag all layers as it should only be no
bigger then 600x600 for most places I resized by 86%

Add proper/clear copyright and Lic.# (If Needed)
Add name and your done. To get the name Like I have it
Just play with the Inner Bevel till you have what you like. 


This tutorial was written by Rebecca Townsley on 6/20/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sexy in the USA Result in the subject line
Can't wait to check them out!
Thursday, June 7, 2012



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed
FTU Misfit Spring from Tasha's Playground HERE.
Tube of Choice . I am using Rachael Tallamy.
You need a lic to use her work. You can get it and her work at HERE.
Font of Choice I used Easy Street.You can get it HERE.
Template used Temp_23 by Twyzted T's Playroom. You can get it HERE.
Mask I used MB and SW Mask 5 by Moonbeams ans Spiderwebs.
You can get it HERE.

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open template Shift+D Close the original.
Image - Canvas resize to 806x581
Using magic wand click on raster 6 Selections - invert
Open paper7 copy and paste as new layer delete.
Add drop shadow and erase any overhang from shadow.
Using magic wand click on raster 2 Selections - invert
Open paper8 copy and paste as new layer delete.
Add drop shadow and erase any overhang from shadow.

Open Tube resize by 75% copy and paste as new layer.
Place to left to look like she is sitting on bottom of box.**
Add drop shadow on seperate layer and erase the part of the
shadow from the wings.Then merge the tube layer down with the shadow layer.

Take magic wand and click on Copy of Raster 3.
Erase the part of the tube thats in that box. Keep selected.
Copy tube and paste again over copy of raster 3 image resize by 125%
move to right just a bit.** Selections - invert - delete. Selections none.

Using a light color from your tube. Flood fill raster 3 and copy of raster 3.
On raster 5 Adjust - add remove noise - add noise - 100% Add drop shadow.
Repeat for raster 4

On rastor 8 flood fill with color from tube Adjust
add/remove noise - add noise 100% add drop shadow

Repeat for following layer but use different colors from tube.
Rastor 9, Copy of rastor 9 , Copy(2) of raster 9,
copy(3) of rastor 9, copy(4) of rastor 9, rasters 7, 13,10 and 14.

I deleted layer 11 and 12.

Open flowers copy and paste as new layer at bottom right of tag.**
Add drop shadow Duplicate - image flip horizontal - flip vertical - move to
top left of tag then to under the tube layer.

Open bird resize by 75% copy and paste as new layer. Image - Flip horizontal
move to top right of tag** Add drop shadow.

Resize all layers by 71% so its not to big.
Open paper6 copy and paste as new layer and move all way to bottom.
Open your mask. Layers - New Mask Layer - from Image.
Find the mask in the list hit ok then Merge group.

Add proper/clear copyright and Lic.# (If Needed)
Add name and your done.


This tutorial was written by Rebecca Townsley on 6/7/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spring Fae Result in the subject line
Can't wait to check them out!

Wednesday, June 6, 2012



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed
PTU Glitter from Scrappin Krazy Designz HERE.
Tube of Choice with a close up. I am using Arthur Crowe.
You need a lic to use his work. You can get it and his work HERE.
Font Of Choice I used Some Weatz. You can get it HERE.

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open New Image 600x600

Open frame2 copy and paste as new layer. Using magic wand click on inside of frame
selections - modify - expand by two - invert.
Open p08 resize by 72% copy and paste as new layer under the frame - delete.
Selections - none.

Open CUpcake resize by 50% copy and paste as new layer and place to the bottom
left of the frame** add drop shadow.

Open Branches resize by 90% copy and paste as new layer and place under
the cupcake layer** add a lighter drop shadow.

Open wisp copy and paste as new layer on bottom of frame under
the branches layer**

Open glitter copy and paste as new layer. Move all way down to bottom layer.**

Open butterfly resize by 85% copy and paste as new layer in
top right corner of frame** Add drop shadow.

Open tube resize if needed I had to resize by 85%. Place to right of frame.**
Duplicate. On duplicated layer blend - hardlight. On bottom layer add drop shadow.

Over the paper layer paste a close up of the tube Image - flip horizontal.
Blend luminance(L) Opacity - 46. Using magic wand click inside the frame
selections - expand by 2 invert on the close up of tube delete.

I resized all layers to 575x575

Add proper/clear copyright and Lic.# (If Needed)


This tutorial was written by Rebecca Townsley on 6/5/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sexy in Pink Result in the subject line
Can't wait to check them out!

Tuesday, June 5, 2012
This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed
PTU Emotions from Crystals Creations HERE.
Tube of Choice. I am using The Hunter.
You need a lic to use his work. You can get it and his work HERE.
Font Of Choice I used Whimsy TT.You can get it HERE.
Mask of choice. I used MB and SW mask 18 by Moonbeams and Spiderwebs.
You can get it HERE.

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open New Image 600x600

Open emo_ee26 Copy and past as new layer. Move down a bit.**
Open Tube and place to where it looks like it is coming
out of the emo_ee26. You may need to resize a bit. Add drop shadow.
On the emo_ee26 selections all - float - defloat.
On the tube erase whats on bottom part Seletions none
then erase any over hang of the tube from bottom.

Open emo_ee37 copy and paste as new layer. Resize by 90%
Move to bottom layer and then up to the top just a bit.**

Open emo_ee2 copy and paste as new layer. Resize by 50%
Move to bottom left of the tube** add drop shadow.

Open emo_ee31 Copy and paste as new layer resize by 25%
and place just to the right of the cat. add drop shadow

Open emo_ee1 copy and paste as new layer. Resize by 50%
Image - flip horizontal place just beside the cat and under the star.**
add drop shadow.

Open emo_pp1 copy and paste as new layer. Move to bottem. Open your mask
Layers - New mask layer - from image choose the mask in the list hit ok
merge group.

I resized all layers by 96% to make it 575x575

Add proper/clear copyright and Lic.# (If Needed)
For the name I used colors from the tube with a stroke width of 3.
The image below is the settings for inner bevel of your name.
Photobucket 
 Add drop shadow of 2, 4, 100, 8


This tutorial was written by Rebecca Townsley on 6/5/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Emo Kisses Result in the subject line
Can't wait to check them out!