Wednesday, September 25, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Ching-Chou Kuik.
You need a license to use her work. You can get it 
and her work at *Coming Soon*
PTU kit Happy Autumn by Tasha's Playground.
Mask of Choice I used Mask 44 MB and SW from
Font of choice I used Script MT Bold.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper2
Mask 44 MB and SW
frame3
tube 
leaves2
umbrella - 85% fr 45 to r
branch3 fl H
boots 50%
branch1


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 700x700.

Copy and paste paper2 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste frame3 as new layer.
Add drop shadow.

Copy and paste tube as new layer. Place behind frame and erase
any overhang. Add drop shadow.

Copy and paste leaves2 as new layer. Move to bottom of frame.**
Add drop shadow.

Copy and paste umbrella as new layer. Move to bottom right of 
frame.** Image - Free roate 45 to the right. Add drop shadow.

Copy and paste branch3 as new layer. Move to top of frame.**
Add drop shadow.

Copy and paste boots as new layer. Move to bottom right of tag.**
Add drop shadow.

Copy and paste branch1 as new layer. Move to left of frame.**
Add drop shadow.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 9/25/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Happy Autumn in the subject line.
Can't wait to check them out!

Tuesday, September 24, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Elias Chatzoudis.
You need a license to use his work. You can get it 
and his work at Elias Art Shop.
PTU kit Scary Cool by Gimptastic Scraps.
You can get it at The PSP Project.
Mask of Choice I used 570 Insatiable Dreams Mask and 530 Insatiable Dreams.
You can get 230 Here.
You can get 270 Here.
Font of choice I used Words - Saginaw.
Font of choice I used name - Alix2.
If you Choose to add the words Will need EyeCandy 4000 
Gradient Glow


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Paper1
570 Insatiable Dreams Mask
Paper5
530 Insatiable Dreams Mask
Frame6
Wire 
Tube 
Belt
Flowers1
SkullHeart - 80%
Heels - 75%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 700x700.

Copy and paste Paper1 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste Paper5 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste Frame6 as new layer.
Add drop shadow.

Copy and paste Wire as new layer. Move to top of frame.** Duplicate
Move to Bottom of frame.** Duplicate Image free rotate 90 to the right.
Move to right of frame.** Duplicate Move to left of frame.** Erase any
hangover from the wires on the sides. Merge the wires together.
Add drop shadow.

Copy and paste tube as new layer. Duplicate Blend mode Hardlight.
Merge down. Add drop shadow. Move slightly to the right.** 

Copy and paste Belt as new layer. Move to bottom of frame.**
Add drop shadow.

Copy and paste FLowers1 as new layer. Move to the left of frame.**
Add drop shadow.

Copy and paste SkullHeart as new layer. Move to the top right.**
Add drop shadow

Copy and paste Heels as new layer. Move to bottom right.** 
Add drop shadow.

Resize all using Pixels by 600x600

For words if you choose to add them, you will need EyeCandy 4000
Gradient Glow settings 4,25,100 Color white Drop shadow 2, 2, 6, 100.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 9/25/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Love and Ghosts in the subject line.
Can't wait to check them out!


Saturday, September 14, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Lori Karels.
You need a license to use her work. You can get it 
and her work at The PSP Project.
PTU kit Blue Love by Kittie's Sinful Designs.
You can get it at Mystical Scraps.
Mask of Choice I used Mask 52 MB and SW from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used Porcelain.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper 8 - 75%
mask 52 MB and SW 
42
59
99
88
tube - 75%
97 = 40%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste paper 8 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group. .Duplicate
Image flip Horizontal

Copy and paste 42 as new layer. Move to botom Layer.
Add drop shadow.

Copy and paste 59 as new layer.
Add drop Shadow.

Copy and paste 99 as new layer. Move to bottom of frame.**
Add drop Shadow.

Copy and paste 88 as new layer. Move to bottom of frame.**
Add drop Shadow.

Copy and paste tube as new layer. Move behind Frame, Using 
eraser tool I erase part sticking out from top and bottom.
Leaving the hair sticking out on the side there.**
Add drop shadow.

Copy and paste 97 as new layer. Move to top left of tag. Useing
Pick tool rotate to left a bit.** 
Add drop shadow


Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 9/15/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Blue Love in the subject line.
Can't wait to check them out!


Thursday, September 12, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Arthur Crowe.
You need a license to use his work. You can get it 
and his work at Authur Crowes Factory.
PTU kit Morgana by Rabid Designz.
Mask of Choice I used Mask 35 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used TheNautiGal.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper9 - 75%
MB and SW Mask 35
Ele_80 - 80%
Tube - 60% or size to fit
Ele_22 - 50%
Ele_1 - 45%
Ele_43 - 50%
Ele_36 - 50%
Close up resized to fit
Font TheNautiGal

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste paper9 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste Ele_80 as new layer. Add drop Shadow.

Copy and paste tube as new layer. Put to the right and behind
the frame. Add drop shadow. Selections all float defloat. On 
the frame using Eraser tool erase part part of Frame at top to 
look like her head is in front. Selections none.

Copy and paste Ele_22 as new layer. Move to bottom left of the
frame.** Add drop shadow.

Copy and paste Ele_1 as new layer. Move it to the bottom right
of the snake.** Add drop shadow.

Copy and paste Ele_43 as new layer. Move to bottom right of frame.**
Add drop shadow.

Copy and paste Ele_36 as new layer. Move it to the bottom right of
the frame Just to the left of the Boot.** Addd drop Shadow.

Copy and paste close up as new layer. Move to under frame and
to the left.** Using Eraser tool erase parts of the close up
that you see on the outsides of the frame. Duplicate Blend 
Hard Light.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 9/08/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Morgana in the subject line.
Can't wait to check them out!