Tuesday, November 27, 2012



I am trying a bit different way to write these.
Hoping maybe to be a bit easier to understand.
Also this tut tho using a  Halloween kit..I tried to
make it look more magic then Halloween. Tho
I don't think I did that lol.

This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed

PTU kit Making Magic by Disenando Scraps
You can get it HERE.
Tube of Choice. I am using Arthur Crowe.
You need a lic to use his work. You can get it and his work HERE.
Template of Choice. I am using Temp #27 by Twyzted T's Playroom.
You can get it HERE.
Font of choice I used Ambiance BT Swash and A Charming Font.
You can get those HERE and HERE.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item.

Makinmagicdnscrapsbook - 25%
Makinmagicdnscrapsbookkitty - 30%
Makinmagicdnscrapsbottle - 30%
Makinmagicdnscrapsclock - 50%
Makinmagicdnscrapslight - 50%
Makinmagicdnscrapsribbons2 - 75%
Makinmagicdnscrapshallo - 75%
Makinmagicdnscrapspapers8 - 69%
Makinmagicdnscrapspapers15 - 69%
Makinmagicdnscrapspapers10 - 69%


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open Template Shift+D to Duplicate.
Close original. Delete the info layer.
Resize by 89%

Select raster 10 - Selections all, float, defloat, invert
Copy Makinmagicdnscrapspapers10 Move over just a bit to left
Delete -Selections none add drop shadow.
Repeat for raster 4, copy of raster 4, and Copy (2) of raster 4

Select raster 2 - Selections all, float, defloat, invert
Copy Makinmagicdnscrapspapers15 Delete - Selections none
Add drop shadow.

Select Copy (3) of raster 2 Selections all, float, defloat,
Invert - Copy Makinmagicdnscrapspapers8 Delete - Selections none
Add drop shadow.

Using pick tool choose a color from tube.
Select Copy (2) of raster 2
Using Flood fill setting - match mode none, Tolerance 10,
use all layers unchecked, blend normal, opacity 100.
Flood fill the layer.

Using pick tool pick another color from tube
Select raster 3 Using Flood fill setting the same as above.
Floodfill the layer

Using Change to Target Brush and same color as above
Go over raster 5 and copy of raster 5. Add drop shadow to both layers.
Raster 6 and 7 add drop shadow

Copy and paste tube as new layer. May have to resize.
I did by 65%. Move to right of tag.**

Select Copy (2) of raster 2.
Copy and paste tube as new layer again.
Image, Flip horizontal. Blend mode Luminance (L)
Duplicate Blend mode hard light. Add drop shadow to
Luminance layer tube.

Select Copy (2) of raster 2 again Selections all, float,
defloat, invert. Delete on above 2 tube layers.

Select raster 6. Copy and paste Makinmagicdnscrapsribbons2
as new layer. Add drop shadow Move to top of tag.**
Duplicate, Image, Flip Horizontal.

Move to top layer. Copy and paste Makinmagicdnscrapslight
as new layer. Move to right bottom of tag.**
Add drop shadow.

Copy and paste Makinmagicdnscrapsbook as new layer.
Move to bottom right of tag just over the light**
Add drop shadow.

Copy and paste Makinmagicdnscrapsclock as new layer.
Move to bottom left of tag.**
Add drop shadow.

Copy and paste Makinmagicdnscrapsbookkitty as new layer.
Move to bottom left of tag just over the clock.**
Add drop shadow.

Copy and paste Makinmagicdnscrapsbottle as new layer.
Move to top left of tag.** Image, Flip horizontal,
Image Free rotate to the right by 30.

Copy and paste Makinmagicdnscrapshallo as new layer.
Flip horizontal.

If you wish, Using A Charming Font, Add the saying
Spiders, Snails, and PuppyDog Tails.

Add proper/clear copyright and Lic.# (If Needed)
Then add name using Ambiance BT Swash. To make look thicker
like mine I made stroke width same color as color for font
and a width of 2.

This tutorial was written by Rebecca Townsley on 11/27/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spiders, Snails, and PuppyDog tails in the subject line
Can't wait to check them out!

Thursday, November 22, 2012



This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed 
PTU kit Lolliepop Guild by Irish Princess Designs 
Which is an Exclusive kit  at Scrap Candy HERE
Tube of Choice. I am using Jasmine Becket-Griffith. 
You need a lic to use her work. You can get it and her work HERE.
Mask used MB and SW Mask 20 from Moonbeams and Spiderwebs. 
You can get it HERE
Font of choice I used . You can get it HERE.

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

New image 600x600 

Open IBD_Frame2 Resize by 83%. Copy and paste as new layer.
Using magic Wand Click inside frame. Selections - expand by 2- invert.
Open paper of choice Resize by 69% Copy and paste as new layer. 
Move to under frame layer, delete selections none. 
Add drop shadow to Frame.

Open tube copy and paste as new layer. You may or may not need to resize.
This tube I did not have to resize. Place in center of Frame**
Duplicate Blend Hard light. Add drop shadow.
On frame Selections all , float, defloat.
On tube erase bottom to look like she is coming out of the frame.** 
There will be over hang at the bottom.
Leave it :).

Open IBD_Bowlolly resize by 50% Copy and paste as new layer.
move to left of tag erase bottom to look like is it coming out
of the frame.** Selections none. Add drop shadow

Open IDB_HeartRibbon Copy and paste as new layer.
Move to bottom layer** add drop shadow.

Open IBD_CandyBox Resize by 30% Copy and paste as new layer.
Image - Flip horizontal Move to bottom right of tag. Add drop shadow.

Open IBD_Bonbon resize by 10% copy and paste as new layer.
Move to candy box.** Add drop shadow, duplicate 2 times and move them
around just a tad.**

Open IBD_Paper3 copy and paste as new layer. 
Move to bottom layer. Open mask. 
On Tag Layers, New mask layer, from image. Find the mask in the list
click ok merge layers.

Add proper/clear copyright and Lic.# (If Needed) 
I added the saying DelightFall Fairies to it. and then a name.

This tutorial was written by Rebecca Townsley on 11/22/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sweet Candy in the subject line
Can't wait to check them out!

Thursday, November 15, 2012



This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed 
FTU Kit Northern Light by Designs by Vaybs HERE
Tube of Choice. I am using Steve Baier. 
You need a lic to use his work. You can get it and his work HERE.
Font of choice I used Shelly Volante BT. You can get it HERE
Eye Candy 4000 Gradiant Glow.

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

New image 600x250
Floodfill with any color Copy
Open DBV_NorthernLightPaper (6) Paste the white layer on it.
Selections all, float, Defloat, Select the paper layer and copy
Paste as new layer on the Sig tag. Delete white layer.

Open DBV_NLElement Resize by 75% Copy and paste as new layer.
Move to the left of tag and down.** Add drop shadow.

Open DBV_NLElement (32) Copy and paste as new layer.
Move to bottom left of tag.** Add drop shadow.

Now you want to Hide the white layer and Merge Visable.
Name this layer Background layer. 

Open tube copy and paste as new layer. You may or may
not have to resize depending on the tube use. This one I used
I did not have to resize. Move to the right of the tag and down.**
Add drop shadow.

One the background Selections All. Select tube layer, then Selections invert
Delete. This will get rid of the over hang tube. Selections none.

Back on the background Selections All, Modify Contract by 5, invert
Add new rastor layer. Move this layer to the top. Invert, flood fill
with a color from tag. Selections none. Adjust, Add/remove noise,
add noise Gaussian, 50% Monochrome checked. ok. Add drop shadow.

Now go ahead and add proper/clear copyright and Lic.# (If Needed)
If you wish to add the Baby Its Cold Outside add it now. Then your name.
I used eyecandy 400 gradiant glow on the quote and the name. 
Settings glow 3, soft corners 0, overall opacity 100, Draw only on outside checked.
Added a drop shadow of 2, 2, 100,5. 


If you do not plan on animating then you are done with this part
of the Signature.

For the animation
Hide the background layer and your name Merge Visable.
Unhide the other layers. Over the background layer add new layer
floodfill with black. Duplicate 2 times. First layer name Snow 1
Middle Snow 2 and the top one snow 3.

Go to Snow 1 Adjust add/remove noise Add noise settings are
Random, 100%, Monochrome checked. Adjust, Blur, Blur.
Adjust, Brightness and contrast, levels, Settings are
RGB, 37, 58, 85 click ok Blend mode Screen. 
Repeat on Snow 2 and Snow 3.

Hide the merged layer with the tube, Snow 2 and snow 3.
Copy merged. Open animation shop paste as new animation.
Hide Snow 1 and unhide Snow 2 Copy Merged and in animation
shop paste after current frame. Hide Snow 2 and unhide Snow 3.
Copy merged and paste after current frame. Edit select all.
You have your snowy background now.

In psp hide background and snow layers. Unhide the merged layer
with the tube. It should consist of Quote, Tube, and frame and copyright.
Paste in animation shop. Edit duplicate selected, repeat.
Edit Select all.

Now you want to make sure you are on F:1 Click and Drag it to F:1
of your snowy background making sure it is all in right place before
you let go.

If you plan on making this for more then one person I sugest you save it now
in animation. Then all you have to do is open it and add name like this..
Back in psp copy your name and repeat same steps and you did before
with the frame, tube, quote, copyright layer.

For the Avitar in PSP
On the sig tag (after you save it for a blank if your gonna save it)
Delete the top layer, name and the snow layers.

Using crop tool set it to W 150, H 150 Move to a part of
the background you want in the avi. Click on the check.
Image Flip Horizontal. Selections all, Modify, contract by 4, invert.
Add new rastor layer flood fill with same color used on Sig.
Selections none.

Adjust Add/remove noise, add noise, Settings
Gaussian, 50% Monochrome checked. ok. Add drop shadow.

Using same font as before add your First letter or if it fits
name which ever you prefer and save. Settings for gradiant glow 
and drop shadow for this are the same as used on the name 
and quote in the Sig.

This tutorial was written by Rebecca Townsley on 11/15/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Baby It's Cold Outside in the subject line
Can't wait to check them out!



This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed
PTU kit DelightFall by Tasha's Playground HERE.
Tube of Choice. I am using Carrie Hall.
You need a lic to use her work. You can get it and her work *Coming Soon*
Mask used MB and SW Mask 47 from Moonbeams and Spiderwebs.
It says 46 but it is really 47. You can get it HERE.
Font of choice I used Saliere. You can get it HERE.

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

New image 700x600

Open frame 1 copy and paste as new layer.
Using magic wand click on inside of frame. Selections, modify
expand by 2, invert.

Open paper8 resize by 76% Copy and paste as new layer.
Delete, Selections none move to under frame layer.

Copy tube and paste as new layer.Move to right a bit.
She will look like she is sitting on the frame.**
Add drop shadow. On frame Selections, all, float, defloat,
invert. On tube layer erase the part at bottom.**

Open berries2, resize by 75% copy and paste as new layer.
Move to left of frame.** Add drop shadow.

Open lights copy and paste as new layer. Move to under frame layer
and up a bit.** Add drop shadow of 0,0,50,5.

Open mushroom house resize by 50% copy and paste as new layer.
Move to top layer, down and over to right of frame.**
Add drop shadow.

Open sparkle 2 copy and paste as new layer on top.
Move to right of frame.** Duplicate, Image, flip horizontal.
Move to left of frame. Add drop shadow to Frame.

Open paper3 copy and paste as new layer move to bottom layer.
Open mask. Layers, new mask layer, from image click ok.
Merge group. Resize ALL layers by 86%.

Add proper/clear copyright and Lic.# (If Needed)
I added the saying DelightFall Fairies to it. and then a name.

This tutorial was written by Rebecca Townsley on 11/15/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU DelightFall Fairies in the subject line
Can't wait to check them out!

Wednesday, November 7, 2012



This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed
FTU Kit The Red White and Blue by Tasha's Playground HERE.
Tube of Choice. I am using Pin Up Toons.
You need a lic to use his work. You can get it and his work HERE.
Mask used MB and SW Mask 35 from Moonbeams and Spiderwebs.
You can get it HERE.
Font of choice I used TheNautiGal. You can get it HERE.

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

New image 600x600
Open frame3 copy and paste as new layer resize by 90%.
Click inside of frame withmagic wand. Selections - Expand by 2
Selections invert.

Open paper10 resize by 86% copy and paste as new layer. Delete
Move to  under frame layer Selections none. Add drop shadow to frame.

Open swirl2 Resize by 90% copy and paste as new layer. Place over the frame layer.
will be to right of tag and down a bit.** Add drop shadow.

Open Tube copy and paste as new layer. Depending on the tube it may or may
not need to be resized. The one I am useing did not  have to be.
Move to right of tag and over the swirl to look like she is sitting on the swirl.
Add drop shadow.

Open butterfly2 copy and paste as new layer. Move to top left of tag.**
Add drop shadow. Duplicate Resize by 50% Image Flip Horizontal move down just a tad.**

Open mask
Open paper7 copy and paste as new layer. Move to bottom layer.
Layers New mask layer find the mask in the list and click ok.
Merge group.

Add proper/clear copyright and Lic.# (If Needed)
Add a Veterans day Quote if you wish, Your name,
and drop shadow.

This tutorial was written by Rebecca Townsley on 11/07/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Land of the Free in the subject line
Can't wait to check them out!