Sunday, May 26, 2013


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Carrie Hall.
You need a license to use her work. You can get it 
and her work at *Coming Soon*
PTU kit Summer Nights Dream by Gemini Creationz 
Mask of Choice I used Mask 41 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used MaSexy.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

gemini_sumnitedream_starcircle
gemini_sumnitedream_bricks - 95%
gemini_sumnitedream_greenery1
gemini_sumnitedream_flowerstem1
gemini_sumnitedream_flowerstem2
gemini_sumnitedream_swirlydoodle - 75%
gemini_sumnitedream_silverbranch - 90%
tube
gemini_sumnitedream_greenery2 - 75%
gemini_sumnitedream_mushrooms
gemini_sumnitedream_dragonfly - 30%
gemini_sumnitedream_lantern - 75%
gemini_sumnitedream_butterfly - 65%
gemini_sumnitedream_paper5
Mask 41 MB and SW

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste gemini_sumnitedream_starcircle as new layer.

Copy and paste gemini_sumnitedream_bricks as new layer.
Add drop shadow.

Copy and paste gemini_sumnitedream_greenery1 as new layer.
Add drop shadow.

Copy and paste gemini_sumnitedream_flowerstem1 as new layer.
Move to left a bit. Image Flip Horizontal.** 
Add drop shadow.

Copy and paste gemini_sumnitedream_flowerstem2 as new layer.
Move to left a bit.** Add drop shadow.

Copy and paste gemini_sumnitedream_swirlydoodle as new layer.
Move to left a bit.** Add drop shadow.

Copy and paste gemini_sumnitedream_silverbranch as new layer.
Move to right a bit.** Add drop shadow.

Copy and paste tube as new layer. Duplicate Blend Hardlight.
On bottom tube layer add drop shadow.

Copy and paste gemini_sumnitedream_greenery2 as new layer.
Move to bottom right a bit.** Add drop shadow.

Copy and paste gemini_sumnitedream_mushrooms as new layer.
Move to right of tag and down a bit.** Add drop shadow.

Copy and paste gemini_sumnitedream_dragonfly as new layer.
Move to top and to right a bit.** Add drop shadow
Duplicate, Image Flip horizontal, Move to left of tag and
down a bit.**

Copy and paste gemini_sumnitedream_lantern as new layer.
Move to top right of tag.** Add drop dhadow.

Copy and paste gemini_sumnitedream_butterfly as new layer.
Move to bottom left of tag.** Image Free rotate 45 degrees 
to the right. Add Drop shadow.

Copy and paste gemini_sumnitedream_paper5 as new layer.
Move to bottom layer. Layers, new mask layer, from image.
Find mask in list click ok Merge group.

Add proper copyright,  url, and Lic if required;
your name and were done.

This tutorial was written by Rebecca Townsley on 5/27/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Mystical Summers Night in the subject line.
Can't wait to check them out!
Friday, May 24, 2013



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Charles R. Bristow.
You need a license to use his work. You can get it 
and his work at Mystical Scraps.
PTU kit Florabelle Day by Hania Designs at Mystical Scraps.
Font of choice I used AdrineKirnberg.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

14
Paper-07 - 80%
tube close up - 80%
26 - 70% 
80 
57 - 75%
tube - 64%
06 - 40%
48 - 50%
70 - 40%
123

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste 14 as new layer.
Selections all, float, defloat, invert.
Copy and paste Paper-07 as new layer, delete.
Copy and paste close up of tube as new layer.
Move to the right where you only see the one eye.**
Delete, Selections none. Add drop shadow to the 
paper and on the close up Blend, Hard light.

Copy and paste 26 as new layer. Move to left
and up a bit.** Move to bottom layer.
Add drop shadow.

Copy and paste 80 as new layer. Move to bottom 
layer. Images, flip horizontal, flip vertical.
Change opacity to 50. Move to bottom layer.

Copy and paste 57 as new layer. Move to the
top of tag.**

Copy and paste tube as new layer. Images, Flip 
horizontal. Move to the left of tag. Duplicate 
and on top one Blend-Hard light. Add drop
shadow to bottom one.

Copy and paste o6 as new layer. Move to left
of tag.** Add drop shadow.

Copy and paste 48 as new layer. Move to left 
of tag infront of 06 (mushroom).** Add drop
shadow.

Copy and paste 70 as new layer. Move to left
of tag to look like it is sitting on the stump(48).**
Add drop shadow.

Copy and paste 123 as new layer.

Add proper copyright,  url, and Lic if required;
your name and were done.

This tutorial was written by Rebecca Townsley on 5/24/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Natures Art in the subject line.
Can't wait to check them out!


Thursday, May 16, 2013


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Barbara Jensen.
You need a license to use her work. You can get it 
and her work at her STORE.
PTU kit Let it Rain by Creative Crazy Scraps.
You can get it at Mystical Scraps.
Mask MB and SW Mask 30 from Moonbeams and Spiderwebs.
Font of choice I used Arizona.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

CCSE34 - 75%
CCSE7
tube resized to fit
CCSE9
CCSE8 - 30%
CCSE20 - 30%
CCSP12
MB and SW Mask 30


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste CCSE34 as new layer.

Copy and paste CCSE7 as new layer. 
Move to bottom of tag.**

Copy and paste tube as new layer. Move 
down to botton to look like laying on grass.**
Add drop shadow.

Copy and paste CCSE9 as new layer. Move to where it
is just over her head.** On Tube selections all, float,
defloat. On Umbrealla erase handle. Selections none.
Add drop shadow.

Copy and paste CCSE8 as new layer. Place on
top of umbrella to look like it is resting there.**

Copy and paste CCSE20 as new layer. Move to bottom
of tag.** Add drop shadow.

Copy and paste 

Copy and paste CCSP12 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 5/16/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Let It Rain in the subject line.
Can't wait to check them out!


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Alex Prihodko.
You need a license to use his work. You can get it 
and his work at Pics For Design.
PTU kit Daisies and Daffies by Scrappin Krazy Designs.
Mask MB and SW Mask 40 from Moonbeams and Spiderwebs.
Font of choice I used AdineKirnberg.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

tube - 35%
ele08
ele11
ele44
ele07 
ele60
ele09 - 60%
ele12 - 40% 
p11
MB and SW Mask 40


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste ele08 as new layer.
Add drop shadow.

Copy and paste ele11 as new layer

Copy and paste ele44 as new layer.
May have to move down just a tad.**
Add drop shadow.

Copy and paste tube as new layer. 
Move down a tad.** Add drop shadow.

Copy and paste ele07 as new layer.
Move to just over bottom of tube.**
Duplicte, merge down, duplicate, merge down.

Copy and paste ele60 as new layer.
Add drop shadow.

Copy and paste ele12 as new layer. Move to
upper left of tag, duplicate, image, flip
horizontal, move over to right of tag and down
a tad.** Add drop shadows to both.

Copy and paste p11 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 5/16/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spring Hunk in the subject line.
Can't wait to check them out!




Wednesday, May 15, 2013


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Russell Platt.
You need a license to use his work. You can get it 
and his work at *Coming Soon*
PTU kit Kitty Love by Starz Creationz.
You can get it at Mystical Scraps.
Mask MB and SW Mask 22 from Moonbeams and Spiderwebs.
Font of choice I used Swan Song.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Tube - resized to fit
P4 - 86%
F1 - 90%
E36 - 75%
E42 
E44
E9
E28 - 50%
P2
MB and SW Mask 22

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste P4 as new layer. 

Copy and paste F1 as new layer. Using magic wand
click inside frame, selections, modify, expand by 3,
invert. Click on paper layer hit delete. Selections 
none. Add drop shadow to frame.

Copy and paste E36 as new layer. Move to 
top right of frame.** Add drop shadow.

Copy and paste E42 as new layer. Move slightly up
a tad.** Add drop shadow.

Copy and paste E44 as new layer. Add drop shadow. 

Copy and past4e tube as new layer. May need to be resized.
Make center of tag.** Add drop shadow.

Copy and paste E9 as new layer. Move to bottom
of tag. Add drop shadow.

Copy and paste E28 as new layer. Move to right E9.
Add drop shadow, Duplicate, image, flip horizontal,
move to left of tag. 

Copy and paste P2 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 5/15/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU A Kitty Love in the subject line.
Can't wait to check them out!




Thursday, May 9, 2013





This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed

Tube of choice. I used one by Nicolas Garton, GartArt.
You need a license to use his work.
You can get it and his work *Coming Soon*
FTU Glamorous by Tasha's Playground.
BabesDesignz_Mask7 but unfortunatly she has taken her blog down.
so you can download it HERE.
Font of choice I used Algerian.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

scatter
frame
bows
tube
lightstreak2
lips - 75%
tiara
wordart
paper2
BabesDesignz_Mask7 Inverted checked

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste scatter as new layer.

Copy and paste frame as new layer.
Add drop shadow.

Copy and paste bows as new layer.
Move to the right of frame.**
Add drop shadow.

Copy and paste tube as new layer.
Move down a bit.
On Frame selections all float deflaot.
erase bottom part of tube. Selections none.
Erase rest of botto of tube. Add drop shadow.

Copy and paste lightstreak2 as new layer.
Move to be over tube.
On tube selections all float deflaot.
Erase part of streak to look like it is
going around her.


Copy and paste lips as new layer.
Move to bottom left of frame.**
Add drop shadow.

Copy and paste tiara as new layer.
Move to bottom of frame.**
Add drop shadow.

Copy and paste wordart as new layer.
Move to bottom of tiara.**
Add drop shadow

Copy and paste paper2 as new layer.
Move to bottom layer. Layers, new mask layer,
from image, find mask in the list, Inverted checked
click ok merge group.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 5/09/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Glamorous in the subject line.
Can't wait to check them out!


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed

Tube of choice. I used one by Angela Newman.
You need a license to use her work. You can get it
and her work HERE.
PTU kit Lovely Spring Day by Tasha's Playground.
Mask MB and SW Mask 14 from Moonbeams and Spiderwebs.
Font of choice I used PassionsConflictROB.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

tube - 60% or resized to fit if using another tube.
frame4
flowerscatter
bridge
bird
ribbon - 80%
jar - 80%
kitty - 50%
sparkle
paper5
MB and SW Mask 14

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste frame4 as new layer.
Add drop shadow.

Copy and paste flowerscatter as new layer.

Copy and paste bridge as new layer.
Move slightly to the bottom.**
Add drop shadow.

Copy and paste bird as new layer.
Move to left of bridge to look like it is
standing on the bridge.** Add drop shadow.

Copy and paste ribbon as new layer.
Move it to just under top of bridge.**
Add drop shadow.

Copy and paste jar as new layer.
Move to bottom left of bridge.**

Copy and paste kitty as new layer.
Move her over to bottom right of bridge.**
Add drop shadow.

Copy and paste sparkle as new layer.

Copy and paste paper5 as new layer.
Move to bottom layer. Layers, new mask layer,
from image, find mask in the list, click ok
merge group.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 5/09/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU A Fairy Spring in the subject line.
Can't wait to check them out!