Showing posts with label The PSP Project. Show all posts
Showing posts with label The PSP Project. Show all posts
Saturday, September 14, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Lori Karels.
You need a license to use her work. You can get it
and her work at The PSP Project.
PTU kit Blue Love by Kittie's Sinful Designs.
You can get it at Mystical Scraps.
Mask of Choice I used Mask 52 MB and SW from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used Porcelain.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
paper 8 - 75%
mask 52 MB and SW
42
59
99
88
tube - 75%
97 = 40%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste paper 8 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group. .Duplicate
Image flip Horizontal
Copy and paste 42 as new layer. Move to botom Layer.
Add drop shadow.
Copy and paste 59 as new layer.
Add drop Shadow.
Copy and paste 99 as new layer. Move to bottom of frame.**
Add drop Shadow.
Copy and paste 88 as new layer. Move to bottom of frame.**
Add drop Shadow.
Copy and paste tube as new layer. Move behind Frame, Using
eraser tool I erase part sticking out from top and bottom.
Leaving the hair sticking out on the side there.**
Add drop shadow.
Copy and paste 97 as new layer. Move to top left of tag. Useing
Pick tool rotate to left a bit.**
Add drop shadow
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 9/15/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Blue Love in the subject line.
Can't wait to check them out!
Thursday, August 29, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one Cris Delara.
You need a license to use her work. You can get it
and her work at The PSP Project.
PTU Kit Rockin Angel by Scrappin Krazy Designs.
Mask of Choice I used MB and SW Mask 17 from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used BlackChancery.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
p17 - 75%
MB and SW Mask 17
ele57
ele01
ele03
tube - 80% or resized to fit
ele07
ele50 - 50%
ele13
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste p17 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.
Copy and paste ele57 as new layer.
Add drop shadow.
Copy and paste ele01 as new layer.
Copy and paste ele03 as new layer.
Add drop shadow.
Copy and paste Tube as new layer.
Add drop shadow.
Copy and paste ele07 as new layer. Move to bottom of tube.
Add drop shadow. On tube Selections all, float, defloat,
On Speakers layer using eraser tool erase only the part
over her hand and arm. Selections none.
Copy and paste ele50 as new layer. Using pick tool rotate
it just a tad to the left and move to bottom right of the
speakers.** Add drop shadow.
Copy and paste ele13 as new layer. Move to bottom left of
tag.** Add drop shadow.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 8/29/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Rockin DJ in the subject line.
Can't wait to check them out!
Tuesday, July 30, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Camilla Drakenborg.
You need a license to use her work. You can get it
and her work at The PSP Project.
PTU kit Fantasy Day Dreams by Rabid Designs.
Mask of Choice I used Mask 50 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used Swan Song.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
PP_6 - 75%
Mask 50 MB and SW
El_75 - 75%
El_40 - 75%
tube - 75%
El_8
El_10 - 50%
El_27 - 40 %
El_15 - 60%
El_63
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste PP_6 as new layer. Layers, New mask Layer,
Find mask in the list, click on, and merge groups.
Copy and paste El_75 as new layer. Add drop shadow.
Copy and paste El_40 as new layer. Move down and to left
a bit.** Add drop shadow.
Copy and paste tube as new layer. Place over the stairs
to look like she is sitting on them.
Copy and paste El_8 as new layer. Move to left a bit
and move to behind the frame. Erase the part of it
that is showing on outside of frame. Add drop shadow.
Copy and paste El_10 as new layer. Move to top left
of frame.** Add drop shadow.
Copy and paste El_27 as new layer. Move to bottom of
Stairs. Add drop shadow. Duplicate, image, Flip
horizontal, resize by 50% move to bottom right of
the other flower.**
Copy and paste El_15 as new layer. Move to bottom
right of tag.** Add drop shadow.
Copy and paste El_63 as new layer.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/31/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Fantasy Day Dreams in the subject line.
Can't wait to check them out!
Sunday, July 7, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Stefania Russo aka Lady Fanhir.
You need a license to use her work. You can get it
and her work at The Psp Project.
PTU kit Punky Pop by Irish Princess Designs.
Mask of Choice I used Mask 50 MB and SW from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used Witched.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
IPD_PP_Paper6 - 75%
Mask 50 MB and SW
IPD_PP_Halftone op 60
IPD_PP_Frame2
IPD_PP_Bear
Tube - 90%
IPD_PP_Barrells - 50%
IPD_PP_Ribbon1
IPD_PP_Lily - 30%
IPD_PP_Lights
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste IPD_PP_Paper6 as new layer. Layers, New
mask layer, from image, find the mask in the list, click
ok, merge group.
Copy and paste IPD_PP_Halftone as new layer. Set opacity
to 60.
Copy and paste IPD_PP_Frame2 as new layer. Add drop shadow.
Copy and paste IPD_PP_Bear as new layer. Move to left a bit.**
Erase any overhang you see out of the frame. Add drop shadow.
Copy and paste Tube as new layer. Move to right of frame.**
Duplicate, blend hard light. On bottom tube layer add drop
shadow. Merge the two tube layers together.
Copy and paste IPD_PP_Barrells as new layer. Move to bottom
left of tag.** Add drop shadow.
Copy and paste IPD_PP_Ribbon1 as new layer. Move to bottom
of tag.** Add drop shadow.
Copy and paste IPD_PP_Lily as new layer. Move to top left
of tag.** Add drop shadow.
Copy and paste IPD_PP_Lights as new layer.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/07/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Punky Pop in the subject line.
Can't wait to check them out!
Tuesday, June 18, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Cris Delara.
You need a license to use her work. You can get it
and her work at The PSP Project.
PTU kit Rockin Angel by Scrappin Krazy Designs.
Forum mask Mask MB and SW Mask 32 from Moonbeams and Spiderwebs.
Font of choice I used for wording Schizophrenia G.
For Name sloop.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
p06
p13
Forum Mask 32 MB and SW
ele68
ele07
ele24 - 50%
ele21 - 50%
tube - 65%
ele59
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
~Banner~
Open new Image 600x250.
Copy and paste p06 as new layer.
Copy and paste p13 as new layer. Layers,
new mask layer, from image, find mask
in the list, click ok merge group. Blend Lighter
Copy and paste ele 68 as new layer.
Copy and paste ele07 as new layer.
Add drop shadow.
Copy and paste ele 24 as new layer. Move to left
of the speakers.** On Speakers selections, all
float, defloat, erase part of head phones to left
to look like it is hanging on the speaker.
Selections none add drop shadow to headphones (ele24).
Copy and paste ele21 as new layer. Move to right
of banner.** Add drop shadow.
Copy and paste tube as new layer. Move down a tad.**
Add drop shadow.
Copy and paste ele59 as new layer. Move to bottom
of tag.** You will see some area on edge not covered
by ele59 but that will be taken care of with borders.
New rastor layer. Selections all, modify, contract
by 6, Invert flood fill color from tag. Adjust add
remove noise 50% Random, ok.
New rastor layer. Selections all, modify, contract
by 4, invert flood fill white.
New rastor layer. Selections all, modify, contract
by 2 invert flood fill same color as the first.
Adjust Add noise same settings as before.
Merge the banner layers together. Add drop shadow.
Add proper copyright. url and Lic if required
THe wording *Let the Beat Rock* and your name.
And were done with the Banner.
DO NOT FORGET TO SAVE!
~Avitar~
Duplicate Banner Delete Border, wording, copyright,
and if you wish like I did the tube.
Using Crop tool make setting 150 x 150 and set it where
you want to show for avitar. I went to left of banner.
Copy and paste tube THis time tube resized by 50%.
Move to right.**add drop shadow.
On top layer add new rastor layer. Same as with borders
in Banner.
Selections all, modify, contract
by 6, Invert flood fill color from tag. Adjust add
remove noise 50% Random, ok.
New rastor layer. Selections all, modify, contract
by 3, invert flood fill white.
New rastor layer. Selections all, modify, contract
by 2 invert flood fill same color as the first.
Adjust Add noise same settings as before.
Merge the banner layers together. Add drop shadow.
This tutorial was written by Rebecca Townsley on 6/18/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Let the Beat Rock in the subject line.
Can't wait to check them out!
Tuesday, June 11, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Alena Lazareva.
You need a license to use her work.
You can get it and her work at The PSP Project.
PTU kit Satin and Pearls by Irish Princess Designs.
Mask MB and SW Mask 52 from Moonbeams and Spiderwebs.
Font of choice I used Vivaldi.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
IPD_SP_Scatter - 95%
tube - 90% hard light
IPD_SP_GemHeart
IPD_SP_Ribbon1
IPD_SP_RoseCluster - 60% FH
IPD_SP_Sparkles
IPD_SP_Paper7 - 75%
Mask 52 MB and SW
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste IPD_SP_Scatter as new layer.
Copy and paste tube as new layer. Duplicate
Blend Hard light. On First layer add drop shadow.
Merge top tube layer down to bottom tube layer.
Copy and paste IPD_SP_GemHeart as new layer.
on Tube layer Selections all, float, defloat.
Now click on frame layer and erase the part
of frame at top over the tube. Selections non.
Erase any tube hangover on botton and sides.
Add drop shadow to frame.
Copy and paste IPD_SP_Ribbon1 as new layer. Move to
bottom of tag**. Add drop shadow.
Copy and paste IPD_SP_RoseCluster as new layer. Add drop
shadow. Flip Horizontal move over to right of tag.**
Copy and paste IPD_SP_Sparkles as new layer.
Copy and paste IPD_SP_Paper7 as new layer.
Move to bottom layer. Layers, new mask layer,
from image, find mask in the list, click ok
merge group.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 6/11/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Satin Eligance in the subject line.
Can't wait to check them out!
Wednesday, April 10, 2013
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Camilla Drakenborg.
You need a license to use Her Work.
You can get it and her work at The PSP Project.
PTU kit Spring Renewal by Whispys Dzines.
Mask MB and SW timeline mask 6 from Moonbeams and Spiderwebs.
Font of choice. I used PassionsConflictROB.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 90%
tube reg
MB and SW Timeline Mask 6
wd_sr_pp8
wd_sr_pp4
wd_sr_el18 - 50%
wd_sr_el38 - 10%
wd_sr_el33 - 35%
wd_sr_el27 - 20%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 851x315.
Flood fill using wd_sr_pp8 as a pattern.
Layers new layerFlood. Flood fill using wd_sr_pp4
as a pattern. Open mask, Layers New mask layer,
find the mask in the list, click ok, merge group. Merge down.
Copy and paste wd_sr_el18 as new layer. Add drop shadow.
Copy and paste tube as new layer. Move to right of tag.**
Add drop shadow.
Now without resizing copy and paste tube as new layer.
Move to left of tag where only part of her shows.**
Blend mode, Luminance (L) Duplicate Blend mode hard light.
Add drop shadow to first Luminace layer tube.
Copy and paste wd_sr_el38 as new layer. Move to bottom
and just a bit to the right of center.** Add drop shadow.
Duplicate Image Flip Horizontal and Vertical. Move up
and to left of center. Tips of center leaf should touch.
Copy and paste wd_sr_el33 as new layer. Move to bottom of
tag.** Add drop shadow.
Copy and paste wd_sr_el27 as new layer.
Move to over top center leaf. Add drop shadow.
Duplicate free rotate to left 90 degrees.
Add proper copyright. url and Lic if required.
Add Saying Inner Bevel, Settings - Bevel 2, width 31
Smoothness 40, Depth 26, Ambience 37, Shineness 20
color (your choice I used a lighter color used on font),
Angle 0, Intensity 26, Elevations 90.
Duplicate Move top layer just a tad up to left.
On bottom saying layer Effects cutout, settings to your liking.
Add drop shadow settings 2.2.100.6.
Add name Inner bevel same settings as above.
Add drop shadow.
This tutorial was written by Rebecca Townsley on 4/10/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spring has Come in the subject line
Can't wait to check them out!
Wednesday, March 20, 2013
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
Tube of choice. I used Alena Lazareva.
You need a license to use her work. You can get it
and hoer work at The PSP Project.
PTU kit Lucky Clover by Irish Princess Designs.
Mask mythmask45 by Mythical from Creative Misfits Blog.
Font of choice I used Sloop.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Tube - 75 luminance duplicate hardlight
tube background
IBD_LC_Frame3 - 85
IBD_LC_Banner
IBD_LC_Rose1 - 50
dup 75 dup 75
IBD_LC_Doodle
IBD_LC_Bouquet - 50
IBD_LC_Paper5
mask
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste IBD_LC_Frame3 as new layer.
Copy and paste the background layer of the tube as new layer.
Images Flip horizontal. Move down and to left just a tad.**
Make bottom layer.
Using magic wand click inside frame.
Selections modify expand by 2 Selections invert,
delete, Selections none. Add drop shadow to frame.
Copy and paste IBD_LC_Banner as new layer.
Move to top of frame.** Add drop shadow.
Copy and paste tube as new layer.
Move to right of frame and up to
look like sitting on it.** Blend Luminance(L)
Duplicate blend hardlight. Add drop shadow to first layer.
Copy and paste IBD_LC_Bouquet as new layer.
Move to bottom right of tag.** Add drop shadow.
Copy and paste IBD_LC_Rose1 as new layer.
Move to bottom left of tag.** Duplicate resize by 75%
Move to right a bit.** Duplicate that one resize by 75%
Move to right a bit.**
Copy and paste IBD_LC_Doodle as new layer.
Move to top of tag and place as bottom layer.**
Add drop shadow.
Copy and paste IBD_LC_Paper5 as new layer.
Move to bottom layer.
Layers, New mask layer, Find mask in list, click ok.
Merge group.
Add proper copyright, url, and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 3/20/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Lucky Fairy in the subject line
Can't wait to check them out!
Thursday, February 14, 2013
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
Tube of choice. I used Henning Ludvigsen.
You need a license to use his work. You can get it
and his work here at The PSP Project.
PTU kit This Love by Rabid Designs.
Mask StaciMisfitAutumnFallMask1 from Creative Misfits Blog.
Font of choice I used Times New Romance.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Tube
Mask
frame1 - 85%
ele8
ele9 - 50%
ele45 - 50%
ele50 - 75%
Paper11 - 75%
Paper4
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste frame1 as new layer. Image free rotate,
to the right by 45 degrees all layers NOT checked.
Using Magic Wand Click inside each part of frame.
Selections, expand by 15, invert.
Copy and paste Paper11 as new layer.
Delete Selections none.
Copy and paste tube as new layer. Using pick tool
rotate to the left.** Add drop shadow. On Frame Selections
all, float, defloat, on tube erase part at bottom of frame.**
Add drop shadow to frame.
Copy and paste ele8 as new layer. Move to bottom layer.
Add drop shadow.
Copy and paste as new layer. Move to bottom left
of tag.** Add drop shadow.
Copy and paste ele45 as new layer. Move to bottom right.
and under the roses.** Add drop shadow.
Copy and paste Paper4 as new layer. Layers, new mask layer,
from image, find name in list click ok. Merge group.
Add proper copyright. url and Lic if required.
Add name Inner Bevel, Bevel 2, width 8
Smoothness 0, Depth 12, Ambience 0, Shineness 0
color white, Angle 315, Intensity 30, Elevations 60
Add drop shadow and your done.
This tutorial was written by Rebecca Townsley on 2/14/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Pink Love in the subject line
Can't wait to check them out!
Sunday, January 20, 2013
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
Tube of choice. I used Camilla Drakenborg.
You need a license to use her work. You can get it
and her work at The PSP Project.
PTU kit A Very Merry Winter by Tashas Playground.
Mask MB and SW Mask 15 by Moonbeams and Spiderwebs.
Font of choice I used young love es.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 80%
frame2
paper10 69%
paper2 75%
snow mound 65%
branch
bird
berries 50%
wordart
MB and SW Mask 15
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start with New rastor image of 600x600
Copy and paste frame2 as new layer.
Move to right and up just a tad.**
Copy and paste tube as new layer.
Place behind frame.** Erase any overhang
from behind frame. Add drop shadow.
Copy and paste paper10 as new layer.
Place behind tube.** Erase any overhang
from behind frame.
Copy and paste snow mound as new layer.
Place over and move to bottom of frame.**
Copy and paste dots as new layer.
Place over the snow mound.**
Copy and paste branch as new layer.
Place over the dots and snow mound.**
Add drop shadow.
Copy and paste bird as new layer.
Move to right of branch.**
Add drop shadow.
Copy and paste berries as new layer.
Place to bottom left of the tag.**
Copy and paste wordart as new layer.
Place kinda to the top.**
Add drop shadow.
Copy and paste papaer2 as new layer.
Move to bottom layer.
Layers, New mask layer, Find the mask in
the list click ok merge group.
Add proper copyright. url and Lic if required.
In this case I just used a kit. So the proper
copyright would be whatever the Designer has in their
TOU. ALWAYS read the TOU of a designers products.
Add name and your done.
This tutorial was written by Rebecca Townsley on 1/20/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Bee My Honey in the subject line
Can't wait to check them out!
Monday, December 3, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit Midnight Blues by Rabid Designz.
You can get it HERE.
Tube of Choice. I am using Lori Kerals.
You need a lic to use her work. You can get it and her work HERE.
Font of choice I used SnagglePuss. You can get it HERE.
EyeCandy 4000 gradiant Glow
Muras Meisters Copies
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Element_1 - 15%
Element_27
Paper_7
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new image 600 x 250
flood fill with white copy delete
Open Paper_7 paste as new layer on paper.
Selections all, float, defloat.
Click on paper layer copy.
Back to forum sig paste as new layer.
Now you have your background.
Copy and paste tube as new layer.
Blend mode Multiply Opacity 69
Effects Muras Meisters - Copies. Settings are
Wall Paper Random Wraparound
Number 15, x and y 50, Angle and Rotation 0,
Attenuation 0, Scale 100, Thru BG Range and fade out 0.
Click Ok. Blend mode Multiply Opacity 69
Copy and paste tube as new layer. Flip horizontal
and place to left of sig**. Duplicate Blend mode Hard light.
Add drop shadow on original.
Copy and paste Element_27 as new layer.
Move to top right of sig**. Duplicate x4.
Should have 5 of them. Using pick tool rotate each one a bit.
Effects Eyecandy 4000 Gradiant Glow Settings
Color of choice I used white. 4, 100, 100. Click ok.
draw only outside selection. Image Flip Vertically.
On background layer selections all modify,
Contract by 5 Selections invert. Add new layer,
move to top of sig and floodfill with color from tube.
Selections none. Adjust add remove noice, Add noise,
Gaussian 100% Monochrome checked. hit ok. add drop shadow.
Add proper/clear copyright and Lic.# (If Needed)
Add a saying if you wish like I did. If not then just
add your name and your done with the sig. On name I used
Eyecandy 4000 gradiant glow same settings as before in text.
Then added a drop shadow of 2, 2, 100, 4
For the Avitar using Crop tool pixel dimensions w150 x h150
Move the box over to where you want to show in your avi.
Click the check. Delete all layers from the sparkles up.
On background layer selections all Modify contract by 5.
Selections invert. Add new layer,
move to top of sig and flood fill with color from tube.
Selections none. Adjust add remove noise, Add noise,
Gaussian 100% Monochrome checked. hit ok. add drop shadow.
Add proper copyright for an avitar. Name or First letter.
Eyecandy 4000 gradiant glow same settings as before in text.
Then added a drop shadow of 2, 2, 100, 4
This tutorial was written by Rebecca Townsley on 12/3/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Keeper of the Fireflies in the subject line
Can't wait to check them out!
Tuesday, October 9, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU Kit City In November by Alexas Scrap Box HERE.
Tube of Choice. I am using Alena Lazareva.
You need a lic to use her work. You can get her work HERE.
Font of choice I used AdineKirnberg.You can get it HERE.
Mask used CreativeMisfits_FallMAsk2_MC by Melissa
from Creative Misfits Creations. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new rastor layer 600x600
Open CityInNovember_ASB_Frame02 Copy and paste as new layer
Add drop shadow
Open CityInNovember_ASB_Frame03 Resize by 90%
Copy and paste as new layer.
Using magice Wand click inside the silver frame
Selections Modify - expand by 2 - Invert
Open CityInNovember_ASB_Paper12 Resize by 75%
Copy and paste as new layer mive to bottom layer
Delete Selections none
Open Tube Copy and paste as new layer.
Move over to left just a bit.** Add drop shadow
Using magice Wand click inside the silver frame
Selections Modify - expand by 2 - Invert
On the tube erase the bottom part only.
Selections none Add dropo shadow to silver frame.
Open CityInNovember_ASB_Clock Copy and paste as new
Move to ove paper layer - Blend mode Luminance(L)
Add drop shadow.
Open CityInNovember_ASB_Pumpkin Resize by 50%
Copy and paste as new layer move to the bottom
right of tag.** Add drop shadow
Open CityInNovember_ASB_Glitter03 Resize by 50%
Copy and paste as new layer move to top left**
Add drop shadow Duplicate
Image Flip Horizontal Image Flip Vertical
Move to the bottom right**
Open CityInNovember_ASB_Lips01 Resize by 35%
Copy and paste as new layer and move to over the pumpkin.**
Open CityInNovember_ASB_Doodle01 Resize by 50%
Copy and paste as new layer Move to under pumkin layer.**
Add drop shadow.
Open mask and CityInNovember_ASB_Glitter05
Copy and paste as new layer move all the way to the bottom.
Layers - New mask Layer - From Image - Find the mask in the list
Click ok Merge Group.
Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
This tutorial was written by Rebecca Townsley on 10/9/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Autumn Kisses Result in the subject line
Can't wait to check them out!
Subscribe to:
Comments
(Atom)