Wednesday, July 31, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Charles Bristow.
You need a license to use his work. You can get it
and his work at Mysitcal Scraps.
PTU kit Steampunk Girl by Irish Princess Designs.
Mask of Choice I used Mask 43 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used Trinigan.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Mask 43 MB and SW
IPD_SG_PAPER9 - 75%
IPD_SG_Cluster2 - 95%
IPD_SG_Ribbon1
Tube - Sized to fit
IPD_SG_Tedrils
IPD_SG_Ribbon - 75%
IPD_SG_Goggles - 75%
IPD_SG_Hat - 40%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste IPD_SG_PAPER9 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.
Copy and paste IPD_SG_Cluster2 as new layer.
Add drop shadow.
Copy and paste IPD_SG_Ribbon1 as new layer. Move to top of tag.**
Add drop Shadow.
Copy and paste Tube as new layer. Move to right of tube just a
tad. Add drop shadow.
Copy and paste IPD_SG_Tedrils as new layer. Move to right of tag.**
Copy and paste IPD_SG_Ribbon as new layer. Move to the bottom of
tag.** Add drop shadow.
Copy and paste IPD_SG_Goggles as new layer. Image flip horizontal,
Move to bottom and then to right just a tad.** Add drop shadow.
Copy and paste IPD_SG_Hat as new layer. Move to bottom
right just to side of goggles.**
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/31/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Steampunk Girl in the subject line.
Can't wait to check them out!
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by FourXDesigns.
You need a license to use her work. You can get it
and her work at FourXDesigns Store.
PTU kit Cool Girl by Dran Designs.
You can get it at her store in The PSP Project.
Template used was made by Rabid Designz.
You can get it HERE.
Mask of Choice I used MB and SW Mask 14 from Moonbeams and Spiderwebs.
Font of choice I used Slug fest.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
template
paper2 - 75%
paper7 - 75%
paper10 - 75%
Tube - resize to fit
Close up of Tube - resize to fit
element23 - 80%
element3 - 50%
element6 - 30%
element32 - 50%
paper8 - 75%
MB and SW Mask 14
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template Duplicate and close original. Delete Copyright Info.
Resize all layers by 86%. On small rectangle 2 layer, Selections,
all, float, defloat, invert. Copy and paste paper2 as new layer.
Delete. Selections none. Add Drop shadow. Repeat for small
rectangle 1 and raster 5.
On Rastor 7 layer of template, Selections, all, float,
defloat, invert. Copy and paste paper7 as new layer. Delete.
Selections none. Add Drop shadow. Selections none.
On Copy of Vector 2 layer of template, Selections, all, float,
defloat, invert. Copy and paste paper7 as new layer. Delete.
Selections none. Add Drop shadow. Selections none.
Repeat for rastor 8 layer.
Copy and paste tube as new layer. Place to the right of the tag.
Flip horizontal, Add drop shadow.
Copy and paste close up of tube over the large circle layer.
On the Circle, selections all, float, defloat, invert.
On tube click Delete, Selections none. On tube blend mode
luminance, duplicate, blend mode Hardlight.
Copy and paste element23 as new layer. Move to left of tag.**
Add drop shadow.
Copy and paste element3 as new layer. Move to bottom left of
the tube.** Add drop shadow.
Copy and paste element6 as new layer. Move to bottom left of
tag.** Add drop shadow.
Copy and paste element32 as new layer. Move to bottom left of
tube just over the suckers.** Add drop shadow.
Copy and paster paper8 as new layer. MAke it bottom layer of tag.
Layers, new mask layer, from image, Find mask in list click on it
then ok, Merge group.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/31/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Cool Girl in the subject line.
Can't wait to check them out!
Tuesday, July 30, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Camilla Drakenborg.
You need a license to use her work. You can get it
and her work at The PSP Project.
PTU kit Fantasy Day Dreams by Rabid Designs.
Mask of Choice I used Mask 50 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used Swan Song.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
PP_6 - 75%
Mask 50 MB and SW
El_75 - 75%
El_40 - 75%
tube - 75%
El_8
El_10 - 50%
El_27 - 40 %
El_15 - 60%
El_63
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste PP_6 as new layer. Layers, New mask Layer,
Find mask in the list, click on, and merge groups.
Copy and paste El_75 as new layer. Add drop shadow.
Copy and paste El_40 as new layer. Move down and to left
a bit.** Add drop shadow.
Copy and paste tube as new layer. Place over the stairs
to look like she is sitting on them.
Copy and paste El_8 as new layer. Move to left a bit
and move to behind the frame. Erase the part of it
that is showing on outside of frame. Add drop shadow.
Copy and paste El_10 as new layer. Move to top left
of frame.** Add drop shadow.
Copy and paste El_27 as new layer. Move to bottom of
Stairs. Add drop shadow. Duplicate, image, Flip
horizontal, resize by 50% move to bottom right of
the other flower.**
Copy and paste El_15 as new layer. Move to bottom
right of tag.** Add drop shadow.
Copy and paste El_63 as new layer.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/31/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Fantasy Day Dreams in the subject line.
Can't wait to check them out!
Wednesday, July 24, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Zindy Nielson.
You need a license to use her work. You can get it
and her work at ZindyZone Shop.
PTU kit These Tears by Tasha's Playground.
Mask of Choice I used Mask 34 from Moonbeams and Spiderwebs.
Font of choice I used Some Weatz Swashes.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
MB and SW Mask 34
paper4 - 75%
frame 1
swirl
tube
broken glass
raindrops
beads
cluster
flower1 80%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste paper4 as new layer. Layers, New mask Layer, from image.
Find mask in the list click on it then ok. Merge Group.
Copy and paste frame 1 as new layer. Add drop shadow.
Copy and paste swirl as new layer. Move to behind frame and up to the
top a bit. Add drop shadow.
Copy and paste tube as new layer. Move to right and down a bit.**
Move to behind frame. Erase any over hang.
Copy and paste broken glass as new layer. Move to behind frame.
Set opacity to 55.
Copy and paste raindrops as new layer. Move to behind the frame.
Copy and paste beads as new layer. Move to behind frame and down
to bottom of it.** Add drop shadow.
Copy and paste cluster as new layer. Move to top of frame.**
Add drop shadow.
Copy and paste flower1 as new layer. Move to bottom right
of tag.** Duplicate resize by 80% move to the leftand down
a tad.** Add drop shadow to both.
Add proper copyright. url and Lic if required
Add saying if you wish, your name, and were done.
This tutorial was written by Rebecca Townsley on 7/24/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Too late to Apologize in the subject line.
Can't wait to check them out!
Tuesday, July 23, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Keith Garvey.
You need a license to use his work. You can get it
and his work at Garv Girls PSP Tubes.
PTU kit American Beauty by Scrapping Krazy Designs.
Mask of Choice I used Mask 44 MB and SW from Moonbeams and Spiderwebs.
Fonts of choice.
Used for words - AdimeKirnberg.
Used for name - Adorable.
Eyecandy 4000 Gradient Glow
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
p12 - 75%
Mask 44 MO and SW
ele94
tube ds 2,2,86,15
ele61
ele68 - 50%
ele56 - 50%
ele40 - 50%
ele72 - 50%
ele86
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste p12 as new layer. Layers, new mask layer, from image
Choose your mask in the list, click ok, merge group.
Copy and paste ele94 as new layer.
Copy and paste Tube as new layer. Move to where her hat is just above
the frame.** Add drop shadow settings, 2,2,86,15. On frame selections
all, float, deflaot. On tube erase only some of the bottom to look
like she is coming out of the frame. Selections none.
Copy and paste ele61 as new layer. Move down to bottom of frame.**
Copy and paste ele56 as new layer. Move to bottom right of tag.**
Add drop shadow.
Copy and paste ele68 as new layer. Move to just behind the log.**
Copy and paste ele40 as new layer. Move to over the log.** Add
drop shadow. On the log Selections all float defloat. On horse
erase just tha back legs to make the hors look like it is
standong over the log.
Copy and paste ele72 as new layer. Move to top right of frame.**
Add drop shadow.
Copy and paste ele86 as new layer. Move down just a tad.**
Add proper copyright. url and Lic if required.
If you wish to, Add the words *Winds of Change* to the top of
tag. Eyecandy 4000 gradient glow using these settings from top
to bottom. 6.00, 25, 100 Color white. Click ok. Add drop shadow
settings 2,2,100,8, Blend Luminance(L). Repeat same process for
your name and were done.
This tutorial was written by Rebecca Townsley on 7/23/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Winds of Change in the subject line.
Can't wait to check them out!
Monday, July 8, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Barbara Jensen.
You need a license to use her work. You can get it
and her work at Barbara Jensen Tubes.
PTU kit ChocoMint by Honored Scraps.
You can get it at her part of the store in Mystical Scraps.
Mask of Choice I used Mask 39 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used Vladimir Script.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Paper_02 - 75%
MB and SW Mask 39
Element_32
Element 27 - 50%
Element_11 - 80%
Element_54
Tube - 85%
Element_66 - 80%
Element_60 - 60%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste Paper_02 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.
Copy and paste Element_32 as new layer. Add drop shadow.
Copy and paste Element 27 as new layer. Put behind the frame.
Move slightly down and to the left.** Erase any overhang.
Add drop shadow.
Copy and paste Element_11 as new layer. Move to Right of tag.**
Add drop shadow.
Copy and paste Element_54 as new layer. Move to Right of tag.**
Add drop shadow.
Copy and paste Tube as new layer. Move to the Left of tag.**
On frame layer Selctions all, float, defloat. On tube layer
erase part of tube at bottom of frame. Selections none.
Erase overhang of tube at bottom of frame. Add drop shadow.
Copy and paste Element_66 as new layer. Move to bottom of
tag.** Add drop shadow
Copy and paste Element_60 as new layer. Move to bottom right
of tag.** Add drop shadow.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/08/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Choco Mint in the subject line.
Can't wait to check them out!
Sunday, July 7, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Stefania Russo aka Lady Fanhir.
You need a license to use her work. You can get it
and her work at The Psp Project.
PTU kit Punky Pop by Irish Princess Designs.
Mask of Choice I used Mask 50 MB and SW from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used Witched.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
IPD_PP_Paper6 - 75%
Mask 50 MB and SW
IPD_PP_Halftone op 60
IPD_PP_Frame2
IPD_PP_Bear
Tube - 90%
IPD_PP_Barrells - 50%
IPD_PP_Ribbon1
IPD_PP_Lily - 30%
IPD_PP_Lights
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste IPD_PP_Paper6 as new layer. Layers, New
mask layer, from image, find the mask in the list, click
ok, merge group.
Copy and paste IPD_PP_Halftone as new layer. Set opacity
to 60.
Copy and paste IPD_PP_Frame2 as new layer. Add drop shadow.
Copy and paste IPD_PP_Bear as new layer. Move to left a bit.**
Erase any overhang you see out of the frame. Add drop shadow.
Copy and paste Tube as new layer. Move to right of frame.**
Duplicate, blend hard light. On bottom tube layer add drop
shadow. Merge the two tube layers together.
Copy and paste IPD_PP_Barrells as new layer. Move to bottom
left of tag.** Add drop shadow.
Copy and paste IPD_PP_Ribbon1 as new layer. Move to bottom
of tag.** Add drop shadow.
Copy and paste IPD_PP_Lily as new layer. Move to top left
of tag.** Add drop shadow.
Copy and paste IPD_PP_Lights as new layer.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/07/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Punky Pop in the subject line.
Can't wait to check them out!
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Scott Koznar.
You need a license to use his work. You can get it
and his work at The PSP Project.
FTU kit Dark Angel by Wicked Princess Scraps.
Mask of Choice I used Mask 42 MB and SW from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used TheNautiGal.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
WP_DA_PP3
Mask 42 MB and SW
WP_DA_DRAPERY
WP_DA_SMOKE - 75%
WP_DA_WRAPFRAME
WP_DA_GLITTERHEARTSPALTTER
WP_DA_BUGGLOBE - 50%
WP_DA_BARBEDHEARTWING - 50%
WP_DA_CROSS2 - 50%
Tube - 75%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste WP_DA_PP3 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.
Copy and paste WP_DA_DRAPERY as new layer.
Add drop shadow.
Copy and paste WP_DA_SMOKE as new layer. May have to move
down some.
Copy and paste WP_DA_WRAPFRAME as new layer.
Add drop shadow.
Copy and paste WP_DA_GLITTERHEARTSPALTTER as new layer.
Add drop shadow.
Copy and paste WP_DA_BUGGLOBE as new layer. Move to the
top right to look like it is hanging fromt he curtain rod.**
Add drop shadow.
Copy and paste WP_DA_BARBEDHEARTWING as new layer. Move to
bottom right of tag.** Add drop shadow
Copy and paste WP_DA_CROSS2 as new layer. Move to bottom
right and behind the heart.** Add drop shadow.
Copy and paste tube as new layer. Move to the left of tag.**
Add drop shadow.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 7/07/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Dark Angel Fae in the subject line.
Can't wait to check them out!
Subscribe to:
Posts
(Atom)