Tuesday, March 26, 2013
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice is an Exclusive tube Aphrodite by Tony T.
You will need TPP Lic to use this tube.
Only at The PSP Project.
PTU kit Greek Goddess by Tasha's Playground.
Made to compliment the Tony Tube Aphrodite.
Exclusively to The PSP Project
Font of choice I used Amaze.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 75% depending on tube used
heart swirl
gold dust
columns
lyre - 50%
mist
strand
path - 85%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste gold dust as new layer. Make bottom layer.
Move up to top of tag.** Duplicate and move that one to bottom
of tag.**
Copy and paste Heart Swirls as new layer. Add drop shadow.
Copy and paste columns as new layer. Move to behind the tube.**
Add drop shadow.
Copy and paste tube as new layer. Add drop shadow.
Copy and paste lyre as new layer. Move to bottom judt by the
tube and columns. Using pick tool rotate slightly to left.**
Add drop shadow.
Copy and paste mist as new layer. Move to bottom of tag.**
Copy and paste strand as new layer. Move to bottom of tag.**
Add drop shadow.
Copy and paste path as new layer. Move to bottom.** To look
like she and the columns are standing on it. Add drop shadow.
Add proper copyright. url and Lic if required.
Add name drop shadow and your done.
This tutorial was written by Rebecca Townsley on 3/27/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Goddess of Love in the subject line.
Can't wait to check them out!
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Erica Leigh Currey.
You need a license to use her work. You can get it
and her work at The PSP Project.
FTU kit Never too Green by Scraps Dimensions.
Mask 42 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used Dobkin.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Tube - Resize to fit
SD NTG FRAME 4 - 65%
SD NTG PAPER 2 - 75%
SD NTG GLITTER SWIRL 1 - 75%
SD NTG LEAVES - 70%
SD NTG FLOWER 2 - 25%
SD NTG FLOWER 2 - 25%
SD NTG BOW 1 - 25%
SD NTG PAPER 8
Mask 42 MB and SW
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste SD NTG FRAME 4 as new layer.
Using magic wand click inside frame. Selections Modify
Expand by 2, invert. Copy and paste SD NTG PAPER 2 as new layer.
Delete Move to under frame layer.
Copy and paste SD NTG GLITTER SWIRL as new layer.
Move to left of frame.** Selections none.
Add drop shadow to frame.
Copy and paste tube as new layer. Resize to fit.
Move to the right of frame.** Add drop shadow.
Copy and paste SD NTG LEAVES as new layer.
Move to bottom of tag.** Add drop shadow.
Copy and paste SD NTG FLOWER2 as new layer. Move to bottom
left.** Add drop shadow. Duplicate resize by 85%. Move slightly
to right of first flower and down a bit.** Merge Down.
Duplicate Image Flip Horizontal Move to right of
tag.**
Copy and paste SD NTG FLOWER 2 as new layer.
Move to center of other flowers.** Add drop shadow.
Copy and paste SD NTG BOW 1 as new layer.
Move to over frame layer and to the left top of frame.**
Add drop shadow.
Copy and paste SD NTG PAPER 8 as new layer.
Move to bottom. Layers, New mask layer, from Image.
Find the mask in the list click ok Merge group.
Add proper copyright. url and Lic if required.
Add name drop shadow and your done.
This tutorial was written by Rebecca Townsley on 3/26/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Never too Green in the subject line.
Can't wait to check them out!
Monday, March 25, 2013
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Verymany.
You need a license to use her work. You can get it
and her work at Pics For Design.
PTU kit Midnight Dream by Scrapping from the Heart.
UF Mask42 from Urban Fairytales .
Font of choice I used Bambino.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
SFTH_MidnightDream_stars - 75%
SFTH_MidnightDream_cloud - 75%
SFTH_MidnightDream_bench - 65%
Tube PFD - 39% or resize to fit
SFTH_MidnightDream_teddybear - 20%
SFTH_MidnightDream_Cherub - 35%
DS-2,2,50,10
SFTH_MidnightDream_Paper6
Urban Fairytales UF Mask42
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste SFTH_MidnightDream_stars as new layer.
Copy and paste SFTH_MidnightDream_cloud as new layer.
Move down close to bottom.**
Copy and paste SFTH_MidnightDream_bench as new layer.
Move to bottom a bit to look like it is on the cloud.
Add drop shadow.
Copy and paste Tube as new layer. Move to where it looks
it is infront of bench on the cloud.** Add drop shadow.
Copy and paste SFTH_MidnightDream_teddybear as new layer.
Move to foot of tube.** Add drop shadow.
Copy and paste SFTH_MidnightDream_Cherub as new layer.
Image, free rotate, 45 to the left. Place in upper left
of tag to look like it is flying.**
Add drop shadow of -2,2,50,10.
Copy and paste SFTH_MidnightDream_Paper6 as new layer.
Move to botom layer. Layers, new mask layer, from image.
Find the mask in the list clock ok Merge group.
Add what ever wording you wish if any.
Add proper copyright. url and Lic if required.
Add name drop shadow and your done.
This tutorial was written by Rebecca Townsley on 3/25/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Waiting for You in the subject line
Can't wait to check them out!
Wednesday, March 20, 2013
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
Tube of choice. I used Alena Lazareva.
You need a license to use her work. You can get it
and hoer work at The PSP Project.
PTU kit Lucky Clover by Irish Princess Designs.
Mask mythmask45 by Mythical from Creative Misfits Blog.
Font of choice I used Sloop.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Tube - 75 luminance duplicate hardlight
tube background
IBD_LC_Frame3 - 85
IBD_LC_Banner
IBD_LC_Rose1 - 50
dup 75 dup 75
IBD_LC_Doodle
IBD_LC_Bouquet - 50
IBD_LC_Paper5
mask
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste IBD_LC_Frame3 as new layer.
Copy and paste the background layer of the tube as new layer.
Images Flip horizontal. Move down and to left just a tad.**
Make bottom layer.
Using magic wand click inside frame.
Selections modify expand by 2 Selections invert,
delete, Selections none. Add drop shadow to frame.
Copy and paste IBD_LC_Banner as new layer.
Move to top of frame.** Add drop shadow.
Copy and paste tube as new layer.
Move to right of frame and up to
look like sitting on it.** Blend Luminance(L)
Duplicate blend hardlight. Add drop shadow to first layer.
Copy and paste IBD_LC_Bouquet as new layer.
Move to bottom right of tag.** Add drop shadow.
Copy and paste IBD_LC_Rose1 as new layer.
Move to bottom left of tag.** Duplicate resize by 75%
Move to right a bit.** Duplicate that one resize by 75%
Move to right a bit.**
Copy and paste IBD_LC_Doodle as new layer.
Move to top of tag and place as bottom layer.**
Add drop shadow.
Copy and paste IBD_LC_Paper5 as new layer.
Move to bottom layer.
Layers, New mask layer, Find mask in list, click ok.
Merge group.
Add proper copyright, url, and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 3/20/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Lucky Fairy in the subject line
Can't wait to check them out!
Tuesday, March 19, 2013
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
Tube of choice. I used Ismael Rac.
You need a license to use his work. You can get it
and his work at his store HERE.
PTU kit Emo Bo Peep by Rabid Designs.
Mask MB and SW Mask 23 from Moonbeams and Spiderwebs.
Font of choice I used Times New Romance.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 90%
MB and SW Mask 23
FRAME_1 - 80%
ELE_2 - 75% - left rotate 25
ELE_4 - 75%
ELE_11 - 75%
ELE_34 - 70%
ELE_44
PP_9 - 75%
PP_7
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste FRAME_1 as new layer.
Using magic wand click inside frame.
Selections, modify, expand by 3 Selections invert.
Copy and paste PP_9 as new layer. Place under frame. Delete.
Add drop shadow to Frame.
Copy and paste tube as new layer.
Move to right of frame.** Add drop shadow.
Copy and paste ELE_2 as new layer. Image free rotate to left
at 25. All layers unchecked click ok. Move to left
of frame.** Add drop shadow.
Copy and paste ELE_4 as new layer.
Move to bottom of frame.** Add drop shadow.
Copy and paste ELE_34 as new layer.
Move down to bottom some. Erase the the back to make it
look like it goes around back of frame.**
Add drop shadow.
Copy and paste ELE_4 as new layer.
Move to bottom left of tag.**
Add drop shadow.
Copy and paste ELE_44 as new layer.
Copy and paste PP_7 as new layer. Move to bottom layer.
Layers, new mask layer, from image, select mask in list.
Click ok merge group.
Add proper copyright, url, and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 3/19/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sexy Bo Peep in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)