Thursday, September 20, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
PTU kit Pumkin Moon by Irish Princess Designs HERE.
Tube of Choice. Preferably one with a close up. I am using Elias Chatzoudis.
You need a lic to use his work. You can get his work HERE.
Template by BKC Designs you can get it HERE.
Font of Choice I used Harington .You can get it HERE.
Mask used Halloween mask 2 by WeeScotsLassCreations.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template. Shift+D to Duplicate. Close original.
Delete the credits and the credits background.
Choose a color or two from your tube using change to target brush go over
orange circle, orange rectangle, and orange square.
On Orange square Selections - all - float - defloat - Invert.
Open IBD_paper2 resize by 69% copy and paste as new layer Delete
Selections none. Blend mode Screen.
On Black square Selections - all - float - defloat - Invert.
Open IBD_paper1 resize by 69% copy and paste as new layer Delete
Selections none.
On orange rectangle Selections - all - float - defloat - Invert.
Open IBD_paper4 resize by 69% copy and paste as new layer Delete
Selections none. Blend mode Screen.
On Black rectangle Selections - all - float - defloat - Invert.
Using IBD_paper1 resize by 69% copy and paste as new layer Delete
Selections none.
On Orange circle Selections - all - float - defloat - Invert.
Open your tube using the close up place to the left of circle** - delete
Slections none. Blend mode Darken. Drop shadow of 0, 0, 100, 9.
Erase any shadow overhang you see on sides of tag from tube.
On small strips 1, 2, and 3, floodfill using a color from tube
and black for a gradiant color.
On Orange circle Selections - all - float - defloat - Invert.
Open tube copy and paste as new layer to right of circle**
Erasing only the bottom part to look like she is standing in the circle.
Open IBD_skullsitter resize by 50% copy and paste as new layer
place to bottom left of tag.**
Open IBD_beware resize by 50% copy and paste as new layer.
Place to right of tag at bottom just over lapping the skullsitter.**
Open IBD_Teethdrip resize by 30% copy and paste as new layer.
Place behind tube kinda center like.**
On bottom layer flood fill using a color from tag or
copy and paste one of the papers.
Open mask and on tag Layers - new mask layer - from image.
Find the mask in the list click on it then ok. Merge Groups.
I added a drop shadow to all the elements, tube and the
Black circle, rectangle, and square and all the small strips.
Add proper/clear copyright and Lic.# (If Needed)
Add name and your done.
This tutorial was written by Rebecca Townsley on 9/20/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Beware Result in the subject line
Can't wait to check them out!
Wednesday, September 12, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
FTU kit Well Hello Kittyby Wicked Princess Scraps HERE.
It is the 10th kit down.
It is the 10th kit down.
Tube of Choice. I am using Victoria Fox.
You need a lic to use her work. You can get it and her work *Coming Soon*.
Font of Choice I used TheNautiGal .You can get it HERE.
Mask used Mask 22 from Moonbeams and Spiderwebs.You can get it HERE.
My template Bite me which you can get HERE.
Mura's Meister - Copies - freeware
Eyecandy 4000 gradiant glow - PTU
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open Template and delete the two info layers.
On Rastor 4 Selections - all - float - defloat - invert.
Open WP_WHK_PP5 Copy and paste as new layer.
Move to below rastor 4. On rastor 4 blend mode - Hard Light
Open tube copy and paste -Delete.
Using Mura's Meister Copies Preset Menu Wallpaper(rotate)
Blend mode soft light Selections none.
On Rastor 3 add a drop shadow Pick a color from the tube.
Add drop shadow using change to target brush go over the frame.
Add another drop shadow.
Using same color and change to target brush go over Rastor 5,
Copy of rastor 5, and rastor 1. On all three of those layers
go to Effects - edge effects - enhance. on Rastor 5 and copy
rastor 5 add drop shadow.
On rastor 2 Effects - eyecandy 4000 - gradiant glow Settings are
8, 25, 100 draw only outside selection checked Color using same
color used for the outline.
On rastor 2 Selections all - flaot - defloat. Add new rastor layor.
Open WP_WHK_PP9. Use it as a pattern and flood fill the letters.
Selections none Move to below rastor 2 On rastor 2 Blend mode Hard light.
Copy and paste your tube as top layer. Resize by 85%
Move to left of tag** Add drop shadow.
Open WP_WHK_BEADEDFLOWER copy and paste as new layer above rastor 9.
Move up and over to right some** add drop shadow.
Duplicate move down and to the left some.**
Duplicate that and move it up and to left some.**
Open WP_WHK_CURTAIN copy and paste as new layer.
Resize by 60% move to left and under the frame.**
Erase any over hang add drop shadow.
Open WP_WHK_LIPS resize by 25% Place under rastor 6 and move
to left and down.**
Pick a fancy font and add on rastor 6
You know you want to..
Resize all layers by 75%.
Open WP_WHK_PP9 copy and past as new layer moving all way to bottom layer.
Open mask go to layers - new mask layer- from image. Find mask in list click ok.
Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name. Convert to rastor layer Gradient glow Settings are
8, 25, 100 draw only outside selection checked Color white.
Add drop shadow of 3, 3, 100, 0
This tutorial was written by Rebecca Townsley on 9/12/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU You Know You Want To Result in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)
Blogroll
Categories
- *Coming Soon*
- 4th of July
- American
- Animals
- Animation
- Arthur Crowe
- Barbara Jensen
- BCA
- Blabs
- CDO
- Charles Bristow
- Christmas
- Clustor Frames for CT
- Creative Design Outlet
- Creative Scraps CT
- CT Facebook Banner
- CT Snags
- CT Tags
- DBV Masks
- Dragons
- DreamScape Imaging
- Elegant Inspirations
- Elias Chatzoudis
- Elizabeth Austin
- FaceBook Timeline
- Fairytale
- Fall
- Fantasy
- Forum Set
- FourXDesigns
- Foxys Designz
- Freeks Creations CT
- FTU
- Goth
- GraphFreaks
- Halloween
- Irish Princess Designs CT
- Joel Adams
- Jose Cano
- June 2018
- Justice Howard
- Keith Garvey
- Mellows Graphics
- Millies PSP Madness
- Moonbeams and Spiderwebs masks
- Mystical Scraps
- Mystical Scraps CT
- New Years
- No Flutter
- No Kit
- No Tube
- PFD Kit
- PicsforDesign
- Pink Kit CT
- Pinup Toons
- PSP 2022 Ultimate
- PTU
- PTU now FTU
- PTU tutorial
- PU Only
- Rabid Designs CT
- Rachael Tallamy
- Red White and Blue
- Rissa's Designs
- Rissa's Designs CT
- Scrap Candy CT
- Scrappin Krazy Designs CT
- Scrapping With Friends
- Selina Fench
- Simple Blog Tuts
- Snag Set
- SoulDesigner CT
- Spring
- St. Patricks Day
- Summer
- Sunny Rose
- Sybile Art
- Tashas Playground CT
- The Hunter
- The PSP Project
- The PSP Project CT
- Tony T
- Tubes 4 Taggers
- Twyzted T's Playroom
- Valentines
- Veterans Day
- Video Tutorial
- Vineger
- Wendy Gerber
- Wendy Gerber CT
- Wicked Princess Scraps
- Wicked Princess Scraps CT
- Winter
- XeracX
- Zindy Nielson