Wednesday, May 16, 2012


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 
PTU Totally 80's from Scrappin Krazy Designs HERE.
Tube of Choice. I am using Angie Monasterio. 
You need a lic to use her work. You can get it and her work HERE.
Font Of Choice Yelly.You can get it HERE.
Mask of choice I used Mask 39 from Moonbeams and Spiderwebs. 
You can get it HERE.

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open New Image 600x600

Open frame4 copy and paste as new layer resize by 80%
Click inside frame with magic wand. Selections  
modify - expand by 2 Modify - invert
Open p10 resize by 80% Copy and paste as new layer 
move to under frame  - delete Selections none

Open tube copy and paste as new layer. Resize if needed.
I resized it by 90% Move to left of tag.
Duplicate tube layer blend - Hard light Merge down add drop shadow.

Open doodle1 copy and paste as new layer. 
Move to bottom and down just a tad.**

Open dice resize by 50% copy and paste as new layer.
Move to top left corner of frame add drop shadow.**

Open star1 copy and paste as new layer. 
Place just over the string of the dice.**
Add Drop Shadow.

Select frame layer selections all - float - defloat.
Open diamonds copy and paste as new layer delete - selections none.

Open sparkle copy and paste as the top layer.
Open ribbon3 copy and paste as new layer above the frame layer.
Move to left of frame** add drop shadow.

Open stars1 copy and paste as new layer.
Place as top layer and place it slightly at bottom.**
Add Drop Shadow

Open p09 copy and paste as new layer. move to bottom layer.
Open mask. Layers - New Mask Layer - from image
find the mask in the list click ok. Merger group.
Resize all layers by 96%

Add proper/clear copyright and Lic.# (If Needed)

Add name and then a drop shadow to name if you wish.

This tutorial was written by Rebecca Townsley on 5/16/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Funky Chick Result in the subject line
Can't wait to check them out!

Wednesday, May 9, 2012




This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 
PTU Party in the City from Tasha's Playground HERE.
Tube of Choice One with a close up. I am using Four X's Designs. 
You need a lic to use her work. You can get it and her work at her store HERE.
Font Of Choice I used Forte .You can get it HERE.
Mask 258 by Vix you can get it HERE.


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new image 600x600 
Open frame 2 Copy and paste as new layer.

Open cityscape resize by 80% Copy and paste as new layer 
Place under frame layer and just a bit to the bottom.**

Add new rastor laye and move to under cityscape.
Using magic wand click inside frame Selections Modify expand by 2
flood fill on the new layer with black. Selections none

Open sparkle2 resize by 75 copy and paste as new layer.

Open Streamer image flip horizontal copy and paste over frame layer. 
Move to left of frame. **

Copy tube and paste as new layer. May have to resize. I did by 75%.
Place as top layer**

Open stars image flip horizontal copy and paste as new layer.
Move down and to right just a touch. ** Add drop shadow to stars and frame.

Open mask and paper6. Copy and paste paper as new layer move to bottom.
Layers - New mask layer - from Image pick your mask click ok. Merge group.
I added a drop shadow you may if you wish.

Resize all to 575x575
Add proper/clear copyright and Lic.# (If Needed)

Add name and were done.

This tutorial was written by Rebecca Townsley on 5/9/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU City Life Result in the subject line
Can't wait to check them out!







This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 
PTU Angel Desires from Inspired Creations HERE.
Tube of Choice One with a close up. I am using Susan Justice. 
You need a lic to use her work. You can get it and her work at *Coming Soon*
Font Of Choice I used on name A Charming font .You can get it HERE.
On Wording I used Adorable you can get it HERE.

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open New Image 600x200

Open paper 5 and click on flood fill tool. Make Paper 5 your pattern
flood fill image with paper.

Copy Close up may have to resize bigger. Place to left of Signature.**
Blend Luminance(L) Duplicate Blend Hardlight.

Open Sparkles 2 Copy and paste as new layer.
Open Clouds Copy and paste as new layer.

Copy tube paste as new layer place to right of Signature.**
Image flip Horizontal. Duplicate Blend Hardlight.

Open Candle 2 resize by 40% copy and paste as new layer. Place to left of
signature just under the eyes of close up.

On background layer Selections - Select all - Modify - Contract by 4
Add new raster layer move to top layer flood fill Black. 
Adjust - Add/remove noise - add noise 100% Add Drop Shadow. 2, 4, 100, 9

Add proper/clear copyright and Lic.# (If Needed)

I added a saying you can if you wish to add or not.

Add name and then a drop shadow to name if you wish.

For the Avatar...

Duplicate Signature Click on your crop tool Width 150 height 175
delete all layers but the Cloud, sparkles, smaller tube, and background.

On Background layer Seletions all - Modify - Contract by 4 Selections Invert
Adjust Add new raster Move to top Flood Fill Black
Add/remove noise - add noise 100% Add Drop Shadow.

Don't forget the proper Copyright and Lic infor for your Avatar
Using same font as did for name in Signature add name or Intials.
Add drop shadow same drop shadow.

This tutorial was written by Rebecca Townsley on 5/9/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Woman are Angels Result in the subject line
Can't wait to check them out!