Wednesday, June 26, 2013




This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Victoria Fox.
You need a license to use her work. You can get it 
and his work at *Coming Soon*
PTU Kit Meeeooowww by Scrappin Krazy Designs.
Mask of Choice I used 319InsatiableDreams.
You can get it Here.
Font of choice I used Times New Romance.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

p13 - 75%
mask
frame1
tube - 80%
cattracks3 - 75%
bow3 - 75%
flower3
kitty - 50%
wordart1
heartsparkle

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste p13 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group. 

Copy and paste frame1 as new layer.
Addd drop shadow.

Copy and paste Tube as new layer. Move slightly 
to right of the frame and down a tad to look 
like she is sitting on it.** Duplicate, Blend- 
hardlight. Add drop shadow.

Copy and paste cattracks3 as new layer. Move to
left of frame.** Add drop shadow. 

Copy and paste bow3 as new layer. Move to bottom
right of frame.**

Copy and paste flower3 as new layer. Move to right
of frame.** Add drop shadow.

Copy and paste kitty as new layer. Move to bottom
left of frame.** Add drop shadow.

Copy and paste wordart1 as new layer. Move to top of tag.
Selections all, float, defloat, Selections, modify, expand
1. Add new layer, Move down using brush tool brush over 
new layer under wordart with white. Selections none.
Drop shadow on wordart 0,0,100,1. Merge down with the 
white wordart background.

Copy and paste heartsparkle as new layer.

Add proper copyright. url and Lic if required
and your name. With name use color from tube or 
tag. Drop shadow of 3,3,100,6. And were done.

This tutorial was written by Rebecca Townsley on 6/26/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Meeeooowww in the subject line.
Can't wait to check them out!


Tuesday, June 25, 2013



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Keith Garvey.
You need a license to use his work. You can get it 
and his work at Garv Girls PSP Tubes.
FTU kit Denim Days by Tasha's Playground.
Mask of Choice I used a mask I made DBD Mask_12.
You can get it Here.
Font of choice I used Old Script.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper2
dbd mask 12
frame1
flowers
tube
strap2
swirl
heart

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste paper2 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group. 

Copy and paste frame1 as new layer.
Addd drop shadow.

Copy and paste flowers as new layer.
Move to right of frame.** Add drop shadow.

Copy and paste tube as new layer. You will see 
of bototm of tube over the frame, using eraser
tool in the square shape erase part of the tube 
hanging over the bottom. Add drop shadow.

Copy and paste strap 2 as new layer.
Move to bottom of frame.** 
Add drop shadow.

Copy and paste Swirl as new layer. Move to over
the strap.** Add drop shadow.

Copy and paste heart as new layer. Move to left
of tag.** Add drop shadow.

Copy and paste 

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 6/25/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Denim Days in the subject line.
Can't wait to check them out!



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Elias Chatzoudis.
You need a license to use his work. You can get it 
and his work at Elias Art Shop.
FTU kit Spring Time Mini Kit by Tasha's Playground.
Mask of Choice I used Moonbeams and Spiderwebs mask 5.
You can get it Here.
Font of choice I used Vivacious.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper1
MB and SW Mask 5
frame2
grass-50%
tube
bunny-75%
butterflies-75%
pond

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste paper1 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group. 

Copy and paste frame2 as new layer.

Copy and paste grass as new layer. Put to left
of tag. Add drop shadow. Duplicate move to right
of grass, repeat this 2 more times. Merge the 
grass layers together. Move to behind frame at 
bottom of frame. Using Eraser tool erase any grass 
overhang from sides and or bottom of frame.

Copy and paste tube as new layer. Move down a tad.**
Duplicate Blend Hardlight, merge down. On Frame
selections ,float, defloat, using eraser tool,
erase the hand and part of kneww on right of tube.
Makes it look like that part of the tube is in the
frame. Selections none. Add drops shadow to frame.

Copy and paste bunny as new layer. Move to bottom
left of frame.** Add drop shadow 0,0,62,15.

Copy and paste butterflies as new layer. Move to
top right of frame.** Same Drop shadow as on the 
bunny.

Copy and paste pond as new layer. Move to bottom
of frame and then behind the grass layer.** Useing
eraser tool erase any overhang from pond on bottom
and or sides of frame.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 6/25/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Natures Fae in the subject line.
Can't wait to check them out!
Monday, June 24, 2013




This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Barbara Jensen.
You need a license to use her work. You can get it 
and her work at Barbara Jensen Tubes.
PTU kit Red White and Boom by Freeks Creations.
Which can be gotten at Mystical Scraps.
Font of choice I used 2Peas 4th of July.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Paper11 - 115%
Firework_Cluster 
Cake_Pops - 75% 
Hat  75%
tube - -  85% 
Bomb2 - 50% 
Sparkles 
Gradiant (Which I made - Download)
Put in your Gradients folder for psp

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

~Facebook Banner~
Open new Image 851x315.

Copy and paste Paper11 as new layer.

Copy and paste Firework_Cluster  as new layer. Duplicate 
Move to right of tag.** Dupilcate, move to left of tag.**

Copy and paste Cake_Pops as new layer. Image, free rotate,
25 to the right. Move to right of tag.**
Add drop shadow.

Copy and paste Hat as new layer. Move to right and down
just a tad.** Add drop shadow.

Copy and paste tube as new layer. Move to right a bit.**
Add drop shadow of 2,6,80,30.

Copy and paste Bomb2 as new layer. Move to bottom left of
tube. Add drop shadow.

Copy and paste Sparkles as new layer. Move to right of tag.
Duplicate, Image, flip horizontal, move to left of tag.

For the border..
New rastor layer. Selections all, modify, contract
by 6, Invert flood fill color blue. Adjust add
remove noise 50% Random, ok.
New rastor layer. Selections all, modify, contract
by 4, invert flood fill white.
New rastor layer. Selections all, modify, contract
by 2 invert flood fill color red.
Adjust Add noise same settings as before.
Merge the banner layers together. Add drop shadow. 

Add proper copyright. url and Lic if required
and your name. Drop shadow on name 2,4,100,5.
This being for facebook you do not put the URL
per facebook rules. Makse sure you save Banner.

~Avitar~
Duplicate banner Delete border layer and copyright layer.
Crop tool settings 180x180 Move it to where you
wish to show in the avi hit enter. 
Repeat above settings in banner for Avitar border.

Add copyright and Lic. Name Same setings as in banner.
And we are done!

This tutorial was written by Rebecca Townsley on 6/24/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Red White and Boom in the subject line.
Can't wait to check them out!
Tuesday, June 18, 2013







This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Cris Delara.
You need a license to use her work. You can get it 
and her work at The PSP Project.
PTU kit Rockin Angel by Scrappin Krazy Designs.
Forum mask Mask MB and SW Mask 32 from Moonbeams and Spiderwebs.
Font of choice I used for wording Schizophrenia G.
For Name sloop.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

p06
p13
Forum Mask 32 MB and SW 
ele68
ele07
ele24 - 50%
ele21 - 50%
tube - 65%
ele59

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

~Banner~
Open new Image 600x250.

Copy and paste p06 as new layer.

Copy and paste p13 as new layer. Layers, 
new mask layer, from image, find mask 
in the list, click ok merge group. Blend Lighter

Copy and paste ele 68 as new layer.

Copy and paste ele07 as new layer. 
Add drop shadow.

Copy and paste ele 24 as new layer. Move to left
of the speakers.** On Speakers selections, all 
float, defloat, erase part of head phones to left
to look like it is hanging on the speaker.
Selections none add drop shadow to headphones (ele24).

Copy and paste ele21 as new layer. Move to right
of banner.** Add drop shadow.

Copy and paste tube as new layer. Move down a tad.**
Add drop shadow.

Copy and paste ele59 as new layer. Move to bottom
of tag.** You will see some area on edge not covered 
by ele59 but that will be taken care of with borders.

New rastor layer. Selections all, modify, contract
by 6, Invert flood fill color from tag. Adjust add
remove noise 50% Random, ok.
New rastor layer. Selections all, modify, contract
by 4, invert flood fill white.
New rastor layer. Selections all, modify, contract
by 2 invert flood fill same color as the first.
Adjust Add noise same settings as before.
Merge the banner layers together. Add drop shadow. 


Add proper copyright. url and Lic if required
THe wording *Let the Beat Rock* and your name. 
And were done with the Banner. 

DO NOT FORGET TO SAVE!

~Avitar~
Duplicate Banner Delete Border, wording, copyright,
and if you wish like I did the tube.

Using Crop tool make setting 150 x 150 and set it where
you want to show for avitar. I went to left of banner.

Copy and paste tube THis time tube resized by 50%.
Move to right.**add drop shadow.

On top layer add new rastor layer. Same as with borders
in Banner.

Selections all, modify, contract
by 6, Invert flood fill color from tag. Adjust add
remove noise 50% Random, ok.
New rastor layer. Selections all, modify, contract
by 3, invert flood fill white.
New rastor layer. Selections all, modify, contract
by 2 invert flood fill same color as the first.
Adjust Add noise same settings as before.
Merge the banner layers together. Add drop shadow. 


This tutorial was written by Rebecca Townsley on 6/18/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Let the Beat Rock in the subject line.
Can't wait to check them out!


Saturday, June 15, 2013



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Barbara Jensen.
You need a license to use her work. You can get it 
and her work at Barbara Jensen Tubes.
PTU kit Graduation Day by Mrs.W.
Available at Mystical Scraps.
Mask MB and SW Mask 47 from Moonbeams and Spiderwebs.
Font of choice I used PassionsConflictROB.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper_05 - 75%
mask 47 MB and SW
ribbon03 - 95%
balloon01 - 50%
balloon04 50% 
tube - 80% 
bear08 50%
bear03 40%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste paper5 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group

Copy and paste ribbon03 as new layer.
Add drop Shadow.

Copy and paste balloon04 as new layer. Move to top
right of tag.** Image free roate - 25 to the right.
Add drop shadow.

Copy and paste balloon01 as new layer. Move just
to the left of first baloon.** Add drop shadow.

Copy and paste tube as new layer. Move down a tad.**
Add drop shadow. -2,3,100,25

Copy and paste bear08 as new layer. Move to bottom
right of tag.** Add drop shadow.

Copy and paste bear03 as new layer. Move to left of
the first bear.** Add drop shadow.
On the tube layer if you see any over hang at bottom
of the bears use eraser tool to erase the overhang.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 6/15/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Congrats Grads in the subject line.
Can't wait to check them out!


Tuesday, June 11, 2013



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Alena Lazareva.
You need a license to use her work.
You can get it and her work at The PSP Project.
PTU kit Satin and Pearls by Irish Princess Designs.
Mask MB and SW Mask 52 from Moonbeams and Spiderwebs.
Font of choice I used Vivaldi.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

IPD_SP_Scatter - 95% 
tube - 90% hard light
IPD_SP_GemHeart
IPD_SP_Ribbon1
IPD_SP_RoseCluster - 60% FH
IPD_SP_Sparkles
IPD_SP_Paper7 - 75%
Mask 52 MB and SW

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste IPD_SP_Scatter as new layer.

Copy and paste tube as new layer. Duplicate
Blend Hard light. On First layer add drop shadow.
Merge top tube layer down to bottom tube layer.

Copy and paste IPD_SP_GemHeart as new layer.
on Tube layer Selections all, float, defloat.
Now click on frame layer and erase the part
of frame at top over the tube. Selections non.
Erase any tube hangover on botton and sides.
Add drop shadow to frame.

Copy and paste IPD_SP_Ribbon1 as new layer. Move to
bottom of tag**. Add drop shadow.

Copy and paste IPD_SP_RoseCluster as new layer. Add drop
shadow. Flip Horizontal move over to right of tag.**

Copy and paste IPD_SP_Sparkles as new layer.

Copy and paste IPD_SP_Paper7 as new layer.
Move to bottom layer. Layers, new mask layer, 
from image, find mask in the list, click ok
merge group.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 6/11/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Satin Eligance in the subject line.
Can't wait to check them out!