Friday, August 22, 2014


This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use her work. You can get it 
and her work here at Mystical Scraps.
PTU kit Gothic Garden by Irish Princess Scraps.
Mask of choice. I used TonyaGrunge2-vi by Creative Misfits.
Font of choice. I used Witched.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

TonyaGrunge2-vi
IPD_GG_Paper9 - 60%
IPD_GG_Moon - 65%
IPD_GG_Ripples - 85%
IPD_GG_Bats
IPD_GG_Tree
IPD_GG_Owl - 45%
IPD_GG_Grief - 85%
IPD_GG_Bush - 65%
IPD_GG_Bushes - 75%
IPD_GG_Dirt - 90%
Tube - 65% or Resize to fit
IPD_GG_Fog
IPD_GG_Cat - 30%
IPD_GG_Wolf - 45%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste IPD_GG_Paper9 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group Opacity 57

Copy and paste IPD_GG_Moon as new layer.

Copy and paste IPD_GG_Ripples as new layer. You will move down and 
over to right just a tad. Hard to see in photo as it gets covered
up mostly. It is more for effect.

Copy and paste IPD_GG_Bats as new layer.

Copy and paste IPD_GG_Tree as new layer. Add drop shadow.

Copy and paste IPD_GG_Owl as new layer. Move up and to the right
a bit to look like it is landing on the tree.**

Copy and paste IPD_GG_Grief as new layer. Move down and to the left.**
Add drop shadow.

Copy and paste IPD_GG_Bush as new layer. Move to the right and down a bit.**

Copy and paste IPD_GG_Bushes as new layer. Move down a bit.**

Copy and paste IPD_GG_Dirt as new layer. Move to bottom just under the
bushes.**

Copy and paste Tube as new layer. Add drop shadow.

Copy and paste IPD_GG_Fog as new layer. Move to bottom.**

Copy and paste IPD_GG_Cat as new layer. Move down and to the left.**
Add drop shadow.

Copy and paste IPD_GG_Wolf as new layer. Move down and to the right.**
Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 8/22/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Gothic Goddaughter in the subject line
Can't wait to check them out!

Wednesday, August 20, 2014


This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Ismael Rac.
You need a license to use his work. You can get it 
and his work here at Xeracx Store.
PTU kit Purple Passion by Creation by Sanie.
Mask of choice. I used Mask 42 MB and SW by Moonbeans and Spiderwebs.
Font of choice. I used Script MT Bold.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Mask 42 MB and SW
p10 - 75%
p07 - 75% 
tube - resize to fit
element15 - 85%
element34
element29 - 75%
element37
element05

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste p10 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Now over the same paper layer
Copy ans paste p07 as new layer. Change Opacity to 48 and blend
mode to screen. Merge group

Copy and paste element15 as new layer. Add drop shadow.

Copy and paste tube as new layer. Add drop shadow. Selections 
all, float, defloat and on frame layer erase on the left side
over the head.** Selections none. Erease any over hang from 
bottom and right of frame.

Copy and paste element34 as new layer. Move to bottom of tag.**
Add drop shadow.

Copy and paste element29 as new layer. Move to bottom right.**
Add drop shadow.

Copy and paste element37 as new layer. Move to top right of tag.**
Add drop shadow.

Copy and paste element05 as new layer. Move to bottom of tag.**

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 8/20/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Purple Passion in the subject line
Can't wait to check them out!

Monday, August 18, 2014


This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Zebrush.
This particular one is an Exclusive.
You need a license to use his work. You can get it 
and his work here at Pics For Design.
PTU kit Birthstone Series Peridot by Tasha's Playground.
Mask of choice. I used MB and SW Mask 5 by Moonbeams and Spiderwebs.
Font of choice. I used SF Burlington Script.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

MB and SW Mask 05
TP_BP_paper05 - 75%
TP_BP_frame02
tube - resize to fit
TP_BP_e23 - 80%
TP_BP_e27 
TP_BP_e13
TP_BP_e30 - 70%
TP_BP_e01 - 70%
TP_BP_e10 
TP_BP_e20

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste TP_BP_paper05 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste TP_BP_frame02 as new layer. Add drop shadow.

Copy and paste TP_BP_e23 as new layer. Move to right of tag.**
Add drop shadow.

Copy and paste TP_BP_e27 as new layer. Images Flip Horizontal.
Move to left of tag.** Add drop shadow.

Copy and paste TP_BP_e13 as new layer. Move to bottom of tag.**
Add drop shadow.

Copy and paste TP_BP_e30 as new layer. Move to bottom left of tag.**
Add drop shadow.

Copy and paste TP_BP_e01 as new layer. Move to top left of tag.**
Add drop shadow.

Copy and paste TP_BP_e10 as new layer. Add drop shadow.

Copy and paste TP_BP_e20 as new layer.

Copy and paste tube as new layer. Move to bottom layer. Add drop shadow.
Selections, all, float, defloat. Use eraser tools on frame, and bow layers.
Selections none, erase any overhang from bottom.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 8/18/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Fresh Peridot in the subject line
Can't wait to check them out!

Sunday, August 10, 2014



This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use her work. You can get it 
and her work here at Mystical Scraps.
PTU kit A Midnight Kiss by Wicked Princess Scraps.
Mask of choice. I used MB and SW Mask 23 by Moonbeams and Spiderwebs.
Font of choice. I used Motion Picture.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.


MB and SW Mask 23
WP_AMK_PP9 - 75%
WP_AMK_GLITTERYSPLAT
tube close up - 50%
WP_AMK_RECTANGLEFRAME - 75%
WP_AMK_ROSEBRANCH - 75%
WP_AMK_ROSENOTE - 40%
WP_AMK_HEARTDANGLE - 60%
WP_AMK_FAN - 40% 
WP_AMK_ROSESHOE - 30%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste WP_AMK_PP9 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste WP_AMK_GLITTERYSPLAT as new layer. Move to bottom right.**
Duplicate, Image, FLip Horizontal and move to top left.** Merge down.

Copy and paste tube close up as new layer. Add drop shadow.

Copy and paste WP_AMK_RECTANGLEFRAME as new layer. Erase any over hang
from tube.

Copy and paste WP_AMK_ROSEBRANCH as new layer. Move to left of frame.** 

Copy and paste WP_AMK_ROSENOTE as new layer. Move to bottom left of tag.**
Add drop shadow.

Copy and paste WP_AMK_HEARTDANGLE as new layer. Move to top right of tag.**
Add drop shadow.

Copy and paste WP_AMK_FAN as newlayer. Image Free rotate 25 to the right.
Move to top right of frame.** Add drop shadow.

Copy and paste WP_AMK_ROSESHOE as new layer. Move to bottom right of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 8/10/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
A Midnight Kiss in the subject line
Can't wait to check them out!