Wednesday, April 25, 2012



This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 
PTU Lucky Bunny from Disenando Scaps HERE.
Tube of Choice One . I am using Barbara Jensen. 
You need a lic to use her work. You can get her work HERE.
Mask 37 from Moonbeams and Spiderwebs HERE.
Font Of Choice I used PetraScriptEF-Alternate .You can get it HERE.


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with new Image 600x600.
Open LuckybunnyGarden Copy and paste as new layer
Resize by 85%. 

Open LuckyBunnymagic4 Copy and paste as new layer.
Resize by 50% and place to right and 
just behind the LuckybunnyGarden.** 

Open Luckybunnybottle3 copy and paste as new layer.
Resizze by 25% place to bottom left.**

Open Luckybunnyqueenofhearts copy and paste as new layer.
Resize by 15% and place just to right of bottle.**

Open Luckybunnyballons4 Copy and paste as new layer.
Resize by 50% and move to right of tag.**

Open Luckybunnydnpaper12 copy and paste as new layer.
Resize by 75% move to bottome layer.

Add drop shadow to all elements but the LuckybunnyGarden.

Open mask...Layers new mask layer from image. 
Find the mask in the list click ok.
Merge group.

Add proper/clear copyright and Lic.# (If Needed)
Add name and your done!


This tutorial was written by Rebecca Townsley on 4/25/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Wonderland Result in the subject line
Can't wait to check them out!

Tuesday, April 17, 2012




This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed
FTU Melancholy Love from Wicked Princess Scraps HERE.
Tube of Choice One . I am using a Camilla Drakenborg Exclusive.
You need a lic to use her work. You can get her work HERE.
Font Of Choice I used MeaCulpa which is a PTU font.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new 600x600
Open WP_ML_FRAME copy and paste as new layer.
Open WP_ML_ROSECLUSTER resize by 50% copy and paste as new layer
over the frame in top left corner**

Using Magic wand click inside frame Selections - Expand by 2
Open WP_ML_PP1 Resize by 62% Copy and paste as new layer - Delete
Move to below frame layer. Duplicate Blend Hard Light
Copy and paste tube as new layer** - Erase bottom of tube.
Selections None add drop shadow to Tube(Duplicate Blend Hard Light tube only),
Frame, and Rose Cluster Layer.

Open WP_ML_GLITTERSWIRL copy and paste as new layer as bottom layer.
Move to Left just a bit.** Add drop shadow.

Open WP_ML_SWIRLEDSTAIRCASE resize by 75% Copy and paste as new layer on top.
On the frame Selection all - Float - defloat Erase the top part of staircase
in frame. Selections - none erase the rest of the staircase at top.

Open WP_ML_BOTTLE resize by 50% copy and paste as new layer.
Place at bottom left of frame. Add drop shadow.

Add proper/clear copyright and Lic.# (If Needed)
Add Name and your done!


This tutorial was written by Rebecca Townsley on 4/17/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Melancholy Result in the subject line
Can't wait to check them out!




This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed
PTU Totally Rad from Tasha's Playground HERE.
Tube of Choice One . I am using a Verymany Exclusive.
You need a lic to use her work. You can get her work at PFD HERE.
Template 19 from Toxic Desires HERE.
Mask 306 from Insatiable Dreams HERE.
Font Of Choice I used Snaggle Puss .You can get it HERE.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open template Shift+D to duplicate it Delete Original.
Click on Lrg White Circle Selections All - Float - Defloat - Invert
Open paper16 resize by 62% Copy and paste as new layer - delete
Open Tube resize by 75% Copy and paste as new layer
Erase bottom part of tube. Selections None. Add Drop Shadow.

Click on the bottom Square 1 Selections - Float - Defloat - Invert
Open paper20 resize by 62% Copy and paste as new layer.
Move to over square** Delete. Selections None Add Drop Shadow.

Repeat above for Top Square 1

Pick a color from the tube, using your Change to Target Brush go over
and then add drop shadow to each of these items...
Wordart layer
Green glittered Heart
Glittered Circle
Pixel wordart
Black Circle
Add drop shadow to Pink Glittered Heart

Open Bear resize by 75% Copy and paste as new layer.
Place to bottom left of tag** Add Drop Shadow.

Open stars copy and paste as new layer and move to
bottom above the background layer.

Open paper4 copy and paste as new layer over background layer.
hide the background layer.

Open Mask On Tag Layers New Mask Layer from Image Select the Mask in the list
Invert mask Data Unchecked.

Add proper/clear copyright and Lic.# (If Needed)
Add name and your done!


This tutorial was written by Rebecca Townsley on 4/17/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Girly Girl Result in the subject line
Can't wait to check them out!