Tuesday, October 30, 2012




This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed
PTU Kit Wild One by Rissa's Designs HERE.
Tube of Choice. I am using Elias Chatzoudis.
You need a lic to use his work. You can get it and his work HERE.
Mask used MB and SW Mask 20 from Moonbeams and Spiderwebs.
You can get it HERE. I love her masks!
Template used PunkyPookerCollabTemp1 from Elegant Insperations.
You can get the template HERE.
Font of choice I used Ravie. You can get it HERE.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open Template Shift+D to duplicate close original.
Delete the CR info layer.

Adjust - Add/Remove noise - Add Noise Settings
Gaussian 50% Monochrome Checked On the following layers..
Black Squares
Left Cirlce Frame
Right Circle Frame
Middle Circle Frame
Left Square Frame
Right Square frame
Lil Black Circle
Black Rectangle
Purple Circle Back1
Purple Circle Back2
Purple Rect1
Purple Rect2
Add Drop Shadow to those layers as well.

Open RD_Paper12 Make it your pattern and using floodfill
Match mode RGB Value, Tolerance 10, Use all layers unchecked,
Blend mode normal, opacity 100 Flood fill Following layers
Left Square
Right Square

Repeat that step with the following papers and layers.
Open RD_Paper8 on Black Circle. Add Drop Shadow
Open RD_Paper2 use on White circle2 and White Circle3
Open RD_Paper9 use on Pink Rectangle, Pink Rect1, and Pink Rect2
Open RD_Paper7 use on Left Circle, Right Circle, and Middle Circle
Open RD_Paper6 Use on White Circle1

On to the Elements.
Open RD_Bones String 1 Copy and paste as new layer
over the Dotted lines layer and move to top right of tag.**
Add Drop shadow.

Move Black Squares down to over left square frame.
Open RD_Swirlie 1 Copy and paste as new layer over the Black Squares.
Move to left of tag.** Add drop shadow.

Open RD_Case Resize by 75% Copy and paste as new layer.
Move to bottom left of tag.** Add drop shadow.

Open Barbed Heart 3 resize by 75% Copy and paste as new layer.
Move to bottom right of tag.** Add drop shadow.

Open RD_Speakers Copy and paste as new layer. Place under the heart layer.
Move to bottom Right of tag.** Add Drop Shadow.

Resize all layers by 67%.

Open Tube copy and paste as new layer.Copy and paste as new layer Just under
the case layer. Place to the left over the Left Circle Frame.** Add drop Shadow.
Use eraser tool erase bottom of tube to look like it is coming out of frame
If using a half tube. If whole place where you think it should be.

Open RD_City Scape 2 Resize by 90% Copy and paste as new layer over the
White Dotted layer.

Open RD_Paper6 paste as new layer move all way to bottom layer.
Open mask Layers - new mask layer - From Image Select the mask in the list
Click ok Merge Group. Change Opacity to 50.

Add proper/clear copyright and Lic.# (If Needed)
Add name. Using the following Settings Add drop shadow
and your done.

Photobucket

This tutorial was written by Rebecca Townsley on 10/23/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU I'm a Wild One Result in the subject line
Can't wait to check them out!

Tuesday, October 23, 2012



This tut was made using PSPx
And knowledge of PSPx5.

Supplies needed 
PTU Kit Tropical Peach by Scrappin Krazy Designs HERE
Tube of Choice one with a close up. I am using Tony Tzanoukakis. 
You need a lic to use his work. You can get it and his work HERE.
Mask used Mask 43 MB and SW from MoonBeams and Spiderwebs.
You can get it HERE.
Font of choice I used Sloop . You can get it HERE.

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Startoff with a new image 600x600

Open ele19 copy and paste as new layer. 
Open p14 resize by 75% Using magic wand click inside the frame.
Selections - Expand by 4 Selections invert.
On the paper layer Delete. Selections none.

Open ele23 copy and paste as new layer. Move to bottom right
of frame** add drop shadow.

Open ele37 copy and paste as new layer. Move to bottom right 
of frame** add drop shadow.

Open ele44 copy and paste as new layer. Place under the frame layer
and to the bottom of tag.** Add drop shadow.

Open ele51 resize by 50% copy and paste as new layer on top move to 
right of tag over the flowers.** Add drop shadow.

Open ele56 resize by 75% copy and paste as new layer. Image - 
Flip horizontal move to top left of frame.** Add drop shadow.

Open ele16 copy and paste as new layer. Move to above paper layer.

Add a drop shadow to the frame. Open tube the one I used did not 
need to resize it. It was the perfect size for how was used. 
Copy and paste the tube as new layer. I moved it to where the face
was main veiw of frame and placed under the frame layer.Duplicate 
Blend hard light. Merge down. Add droop shadow. Using eraser tool 
erase any over hang from under the frame.

Open p04 copy and paste as new layer move to bottomlayer.

Open mask - layers, new mask layer from image Find the mask 
in the kist click ok merge group.

Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.


This tutorial was written by Rebecca Townsley on 10/23/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Pretty In Peach Result in the subject line
Can't wait to check them out!

Sunday, October 21, 2012



This will be a short and sweet tut.

This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed 
PTU Kit Rainbows -N- Stuff by Rabid Designz HERE
Tube of Choice one with a close up. I am using Ismael Rac. 
You need a lic to use his work. You can get it and his work HERE.
Font of choice I used Space Pontiff. You can get it HERE.
Cluster Frame RNS Cluster 01 I made using her kit.
You can get it HERE.

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open RNS CLuter 01 

Using Selections Tools pick Square shape. Make a square just a bit bigger
then the inside of the frame. 

Open Paper_9 resize by 87% Copy and paste as new layer.
Seletions invert - on paper layer delete..move paper to under frame layer.

Open close up of tube Copy and paste as new layer just over the paper
layer. Place it how you want it. Erase any part of the tube outside of the 
frame. Blend mode Screen.

Resize all layers by 85%. 

Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.

on the name I used Inner Bevel Play with the settings till 
you have something you like.

This tutorial was written by Rebecca Townsley on 10/21/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Colors of the Rainbow Result in the subject line
Can't wait to check them out!

Tuesday, October 9, 2012


My son came up with name for this tut. 

This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed 
PTU Kit Spooked by Tasha's Playground HERE
Tube of Choice. I am using Barabara Jensen.
You need a lic to use her work. You can get her work HERE.
Font of choice I used Beware of the Hogs.You can get it HERE.

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new rastor layer 600x600

Open Frame3 resize by 80%. Copy and paste as new layer.

Using magic wand click inside the frame. Selections - 
Modify - expand by 2 - invert.
Open paper6 resize by 86% Copy and paste as new layer.
Move to below frame layer - delete - selelctions none. 

Open spider copy and paste as new layer. Move to left 
of the tag.** Add drop shadow.

Open web copy and [aste as new layer. Move to top right
of frame. Place under frame and erase any overhang.**
Add drop shadow.

Open evil teddy resize by 60% copy and paste as new layer.
Move to bottom right of frame.** Add drop shadow.

Open bat resize by 50% copy and paste as new layer.
Move to top right of tag using pick tool rotate 
a bit to the right.** Add drop shadow.

Open tube copy and paste as new layer. Move to left of tag and down
a bit. You may need to resize depending on the tube.**
add drop shadow. Move to under bear and bat layer.

Using magic wand click inside the frame. Selections Invert 
Erase bottom portion of the tube. Selections none. Add drop shadow
to frame.

Open Light spots copy and paste as new layer.Place over tube layer
but under bear and bat. 

Open swirl copy ans paste as new layer move to bottom of tag
and put over the light spots layer.

Open leaves copy and paste as new layer. 
Move to top right of tag.** Image - flip horizontal
Duplicate Move to bottom left of tag. Merge down
Make this the bottom layer.


Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.


This tutorial was written by Rebecca Townsley on 10/9/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Batty Result in the subject line
Can't wait to check them out!


This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed
PTU Kit City In November by Alexas Scrap Box HERE.
Tube of Choice. I am using Alena Lazareva.
You need a lic to use her work. You can get her work HERE.
Font of choice I used AdineKirnberg.You can get it HERE.
Mask used CreativeMisfits_FallMAsk2_MC by Melissa
from Creative Misfits Creations. You can get it HERE.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new rastor layer 600x600

Open CityInNovember_ASB_Frame02 Copy and paste as new layer
Add drop shadow
Open CityInNovember_ASB_Frame03 Resize by 90%
Copy and paste as new layer.

Using magice Wand click inside the silver frame
Selections Modify - expand by 2 - Invert
Open CityInNovember_ASB_Paper12 Resize by 75%
Copy and paste as new layer mive to bottom layer
Delete Selections none

Open Tube Copy and paste as new layer.
Move over to left just a bit.** Add drop shadow
Using magice Wand click inside the silver frame
Selections Modify - expand by 2 - Invert
On the tube erase the bottom part only.
Selections none Add dropo shadow to silver frame.

Open CityInNovember_ASB_Clock Copy and paste as new
Move to ove paper layer - Blend mode Luminance(L)
Add drop shadow.

Open CityInNovember_ASB_Pumpkin Resize by 50%
Copy and paste as new layer move to the bottom
right of tag.** Add drop shadow

Open CityInNovember_ASB_Glitter03 Resize by 50%
Copy and paste as new layer move to top left**
Add drop shadow Duplicate
Image Flip Horizontal Image Flip Vertical
Move to the bottom right**

Open CityInNovember_ASB_Lips01 Resize by 35%
Copy and paste as new layer and move to over the pumpkin.**

Open CityInNovember_ASB_Doodle01 Resize by 50%
Copy and paste as new layer Move to under pumkin layer.**
Add drop shadow.

Open mask and CityInNovember_ASB_Glitter05
Copy and paste as new layer move all the way to the bottom.
Layers - New mask Layer - From Image - Find the mask in the list
Click ok Merge Group.

Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.


This tutorial was written by Rebecca Townsley on 10/9/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Autumn Kisses Result in the subject line
Can't wait to check them out!
Friday, October 5, 2012
Photobucket

This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed
PTU Kit Fall Time by Disenando Scraps HERE.
Tube of Choice. I am using Tony Tzanoukakis.
You need a lic to use his work. You can get his work HERE.
Font of choice I used Amazone BT.You can get it HERE.
Mask used Mask 42 from Moonbeams and spiderwebs. You can get it HERE.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new rastor layer 600x600

Open falltimeframeribbon4 resize by 70%
copy and paste as new layer.
Add drop shadow.

Open falltimefantscroll resize by 75% Copy and paste
as new layer and move behind the frame and to the left a bit.**
Add drop shadow.

Open tube copy and paste as new layer.
Add drop shadow. Should not have to move it any
but if so it should be center of tag.

Open falltimebutterfly resize by 20% copy and paste
as new layer. Place over the hand of tube. **
add drop shadow.

Open falltimeflowerss resize by 65% copy and paste
as new layer. Move to bottom of tag.**
Add drop shadow.

Open falltimesunflower resize by 15% copy and paste
as new layer. Move to bottom and to left of the flowers a bit.**
Add drop shadow. Duplicate move over to right and down a bit.**

Open falltimehallo copy and paste as new layer.

Open falltimessleaves resize by 10% copy and paste as new layer.
Using pick tool rotate it a bit and place anywhere in the hallo
to look like it is flying in the wind. Add drop shadow.
Duplicate rotate a bit more and move to another spot.

Repeat above steps with falltimesleaves2 and falltimesleaves3.
Move the hallo to above the leaves.

Open falltimepaper resize by 75% copy and paste
as new layer and move to bottom layer.
Open mask - layers - new mask layer - from image.
Find the mask in the list click ok merge group.

Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.


This tutorial was written by Rebecca Townsley on 10/5/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Autumn Winds Result in the subject line
Can't wait to check them out!



This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed
PTU A Day of July Mini Kit by Love Crea HERE.
Tube of Choice. I am using Ismael Rac.
You need a lic to use his work. You can get his work HERE.
Font of choice I used Kyboshed .You can get it HERE.
Mask used Mask 41 from Moonbeams and spiderwebs. You can get it HERE.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new raster layer 600x600

Open frames (2) resize by 40% copy and paste as new layer.
Using magic wand click inside each frame.
Selections - expand by 2 - invert
Open papiers (4) resize by 16% copy and paste as new layer.
move to under frame layer. Delete

Open Elements (13) resize by 40% Copy abd paste as new layer.
Move to under paper  Selections - none

Open tube Copy and paste as new layer. May need to resize a
bit depending on tube used. Just play with it a bit.
Add drop shadow settings for this 2, 2, 61, 10
Move to center**

Using magic wand click inside bottom square of frame.
Selections invert on Tube using eraser only erase
bottom part to look like she is coming out of the sqaure.
Selections none Add drop shadow to frame.

Open elements (7) resize by 30% place over tube**
Add drop shadow. On tube selections all - float - defloat.
erase the part of the ribbon at the top. This will make the
ribbon look like it is wrapped around the tube. Selections none.

Open elements (11) resize by 15% copy and paste as new layer.
Move to bottom right.** add drop shadow.

Open elements (3) resize by 15% copy and paste as new layer.
Move to right of the mushroom house.** Add drop shadow
settings 0,0,100,2. Duplicate move behind the mushroom house,
up, and to the left just a tad.** Duplicate move down and to
left just a tad more.**

Open elements (9) Copy and paste as new layer.
Resize by 15% move to behind mushroom house to the left a bit.**
It will look like it is peeking out from behind the house.
Add drop shadow.

Open papiers (10) resize by 17% copy and paste new layer.
Move to bottom layer. Layers, new mask layer, from image.
Find the mask in the list click ok.
Merge group change opacity to 40.

Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
On the name I used a color from tube for foreground.
Black for the background Stoke set to 1. Image free rotate
90 degrees to the left and used the pick tool to turn
it to be even with frame. Drop shadow settings are -2,3,100,8.


This tutorial was written by Rebecca Townsley on 10/5/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Autumn Moonlight Result in the subject line
Can't wait to check them out!

Monday, October 1, 2012


This tut was made using PSPx5
And knowledge of PSPx5.

Supplies needed
PTU kit Girls Girls Girls by Freeks Creations HERE.
Tube of Choice. I am using Victoria Fox.
You need a lic to use her work. You can get her work *Coming Soon*.
Font of Vladimir Script .You can get it HERE.
Mask used EvG_GrungeMask 1 from Creative Misfits.
You can get it HERE.


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new image 700x700

Open FC_GGG_E40 copy and paste as new layer.
Click inside frame with magic wand.
Selections - modify - expand by 2 - Invert.
Open FC_GGG_P8 resize by 75% copy and paste as
new layer under the frame - Delete Selections - none
add drop shadow to frame.

Open FC_GGG_E38 copy and paste as new layer.
Place to bottom and center of frame. **
add drop shadow.

Open tube copy and paste as new layer.
(the one without the shoe)
Place to right of frame.**

Open FC_GGG_E10 resize by 25% copy and paste as new layer.
Place to left and bottom of frame,** add drop shadow
duplicate, image, flip horizontal move to right and down just a tad.**

Open FC_GGG_E24 resize by 50% copy and paste as new layer.
Place to top left of frame.**

Open FC_GGG_E5 resize by 50% copy and paste as new layer.
Place under tube layer and have handle under her hand
to look like she is holding it.** Add drop shadow.
May need to use a lighter color.

Open FC_GGG_E28 copy and paste as new layer.
Put as bottom layer. Move to bottom right of frame.**
Add drop shadow. Duplicate and move that to top right of frame.**

Open mask and FC_GGG_P10 Copy and paste the paper as a new layer
and move all way to bottom. Layers, new mask layer, from image.
Find mask in list click ok and merge group.
Resize al layers by 82%.

Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.


This tutorial was written by Rebecca Townsley on 10/1/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Dominating the Night Result in the subject line
Can't wait to check them out!