Thursday, August 29, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one Cris Delara.
You need a license to use her work. You can get it 
and her work at The PSP Project.
PTU Kit Rockin Angel by Scrappin Krazy Designs.
Mask of Choice I used MB and SW Mask 17 from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used BlackChancery.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

p17 - 75%
MB and SW Mask 17
ele57
ele01
ele03
tube - 80% or resized to fit
ele07
ele50 - 50%
ele13

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste p17 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste ele57 as new layer.
Add drop shadow.

Copy and paste ele01 as new layer. 

Copy and paste ele03 as new layer. 
Add drop shadow.

Copy and paste Tube as new layer.
Add drop shadow.

Copy and paste ele07 as new layer. Move to bottom of tube.
Add drop shadow. On tube Selections all, float, defloat,
On Speakers layer using eraser tool erase only the part
over her hand and arm. Selections none.

Copy and paste ele50 as new layer. Using pick tool rotate
it just a tad to the left and move to bottom right of the
speakers.** Add drop shadow.

Copy and paste ele13 as new layer. Move to bottom left of
tag.** Add drop shadow.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/29/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Rockin DJ in the subject line.
Can't wait to check them out!


Wednesday, August 28, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Arthur Crowe.
You need a license to use his work. You can get it 
and his work at his store HERE.
You can get it at Mystical Scraps.
Mask of Choice I used Mask 592 Insatiable Dreams.
You can get it Here.
Font of choice I used Arizonia.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Paper1
592 Insatiable Dreams
Frame - 75%
Ribbon2
Berries - 85%
Grapes 
tube - 50% or resize to fit
Lamp - 50%
Pumpkins - 50%
Pinecone2 - 30%
Butterfly - 35% dp rs 50%
Sparkles

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste Paper1 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste Frame as new layer. Add drop shadow.

Copy and paste Ribbon2 as new layer. Add drop shadow. 

Copy and paste Berries as new layer. Move to bottom left 
of frame.** Add drop shadow.

Copy and paste Grapes as new layer. Move to top of frame.**
Add drop shadow.

Copy and paste tube as new layer. Add drop shadow.

Copy and paste Lamp as new layer. Move to left of frame.
To look like it is hanging from it.** Add drop shadow.

Copy and paste Pumpkins as new layer. Move to bottom left
of frame.** Add drop shadow

Copy and paste Pinecone2 as new layer. Move to bottom left 
of the pumpkins.** Add drop shadow.

Copy and paste Butterfly as new layer. Move to top right of 
frame. Using Pick tool rotate a bit to the left.** Add drop 
shadow. Duplicate, resize by 50% Move down and to the left a 
bit.. Using Pick tool to rotate a bit to the right**

Copy and paste Sparkles as new layer.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/28/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Autumn Changes in the subject line.
Can't wait to check them out!



Tuesday, August 20, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Elias Chatzoudis.
You need a license to use his work. You can get it 
and his work at Elias Art Shop .
PTU kit Summer Haze by Tasha's Playground.
Mask of Choice I used MB and SW Mask 25 by Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used MA Sexy.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper7 - 75%
MB and SW Mask 25
net
anchor
tube - 65% or resize to fit
splash2 - 75%
palm tree - 80%
lifesaver - 50%
poles
seagull1 - 50%
shells2 - 50%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste paper7 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste net as new layer.

Copy and paste anchor as new layer. Move to the left and down.**
Add drop shadow.

Copy and paste tube as new layer. Move her down and and just over
the anchor.** Add drop shadow.

Copy and paste splash2 as new layer. Move to to have bottom of splash
be even with bottom of mermaid.**

Copy and paste palm tree as new layer. Move to right of tag a bit.**
Add drop shadow.

Copy and paste lifesaver as new layer. Move to over palm tree to 
look like it is haning on the tree.** Add drop shadow.

Copy and paste poles as new layer. Move to bottom right of tag.**
Add drop shadow.

Copy and paste seagull1 as new layer. Move to over the poles to 
make it look like it is standing on them.** Add drop shadow.

Copy and paste shells2 as new layer. Place at bottom of poles.**
Add drop shadow.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/20/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Mermaid Summer in the subject line.
Can't wait to check them out!


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by ZlataM.
You need a license to use his work. You can get it 
and his work at The PSP Project.
http://www.thepspproject.com/
FTU kit Melancholy Love by Wicked Princess Scraps.
http://wickedprincessscraps.blogspot.com/2011/10/freebie-alert-5-former-ptu-now-ftu.html
Mask of Choice I used Mask 418 by Insatiable Dreams.
You can get it Here.
http://insatiabledreams.net/Cat_s_Masks_too.html
Font of choice I used Riesling.
http://www.dafont.com/riesling.font

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

WP_ML_PP1 - 75%
Mask 418 Insatiable Dreams 
WP_ML_Flower 
WP_ML_BARBEDWIREHEART - 80%
WP_ML_GLITTERSWIRL MBH HEART
Tube - 60% or resize to fit
WP_ML_LEIFLOWER - 35% 
WP_ML_POCKETWATCH - 85% 
WP_ML_DOODLEFLOWER - 50%
WP_ML_PANSYVINE - 50%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste WP_ML_PP1 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste WP_ML_BARBEDWIREHEART as new layer.
Add drop shadow.

Copy and paste WP_ML_Flower as new layer. Move to the left
a bit.** Aff drop shadow. 

Copy and paste WP_ML_GLITTERSWIRL as new layer. Move behind
the Barbed wire heart up and to left a bit.**
Add drop shadow.

Copy and paste tube as new layer. Move to the left
of the heart a bit.** Add drop shadow.

Copy and paste WP_ML_LEIFLOWER as new layer. Move to left and down.
Add drop shadow. Duplicate, Image, flip Horizontal, move to the
Right.** Then make it the layer above the first one.

Copy and paste WP_ML_POCKETWATCH as new layer. Flip Horizontal Move 
down and place it between the two Leiflowers.** Add drop shadow.

Copy and paste WP_ML_DOODLEFLOWER as new layer. Move to where it is
center and up a bit of the Leiflowers.** Add drop shadow.

Copy and paste WP_ML_PANSYVINE as new layer. Move to bottom of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/20/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Melancholy Love in the subject line.
Can't wait to check them out!


Wednesday, August 7, 2013

This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Dean L Norton.
You need a license to use his work. You can get it 
and his work at *Coming Soon*.
PTU kit In My Garden by Rabid Designz.
Mask of Choice I used MB and SW Timeline Mask 6 from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used blackchancery.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Paper6_HP
Paper16 same
MB and SW Timeline Mask 6
Ele_5 - 75%
Ele_26 - 25%
Ele_90 - 50%
tube
Ele_96 - 75%
Ele_100

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 851x315.

Copy and paste Paper6_HP as new layer.Duplicate, Flip horizontal, Move to right
to look like they are the same.**

Copy and paste Paper16 as new layer. Repeat same things as with first paper.
Layers, new mask layer choose the mask from the list click ok Merge group.

Copy and paste Ele_5 as new layer. Move to the left of tag.** 
Add drop shadow.

Copy and paste Ele_26 as new layer. Move to the left on the green leafs.
To look like it is sitting on it.** Add drop shadow. Duplicate, resize by 50%
Move up close to top, duplicate move closer to the bottom.** Merge the 
butterflies and the green leafs together. Duplicate flip horizontal, Move to
right of tag.**

Copy and paste Ele_90 as new layer. Add drop shadow.

Copy and paste Tube as new layer. Move to the right a bit and down a tad.**
Add drop shadow. Duplicate Blend mode Hardlight.

Copy and paste Ele_96 as new layer. Move over to the left of tag.**
Duplicate Images Flip Horizontal Move to right of tag.** 

Copy and paste Ele_100 as new layer.

Layers Add new layer. Selections all, invert. Pick color from tag to
flood fill , Selections none. Adjust, add remove noise, add noise settings
100.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/07/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU In My Garden in the subject line.
Can't wait to check them out!


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Pin Up Toons.
You need a license to use his work. You can get it 
and his work at Creative Design Outlet.
PTU kit Cancun Tropics by Irish Princess Designs.
Mask of Choice I used MB and SW Mask 8 from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used Sagninaw.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

IPD_CT_Paper7 - 75%
MB and SW Mask 8
IPD_CT_Sand - 90%
IPD_CT_Trees - 75%
IPD_CT_Torch - 50%
IPD_CT_Fence - 50%
IPD_CT_Chair - 50%
tube - 50% or resize to fit
IPD_CT_Frond - 20% 
IPD_CT_Drinks - 50%
IPD_CT_Seagull - 50%
IPD_CT_Rock - 75% 
IPD_CT_Bar - 40%
IPD_CT_Pretty

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste IPD_CT_Paper7 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste IPD_CT_Sand as new layer. Move down to the bottome
a but.** Add drop shadow.

Copy and paste IPD_CT_Fence as new layer. Move to the top of the
sand.** Add drop shadow.

Copy and paste IPD_CT_Rock as new layer. Move to last layer and then
to the right and down a bit.** Add drop shadow.

Copy and paste IPD_CT_Bar as new layer. Move to behind the rock
and to the left of the rock a bit.**

Copy and paste IPD_CT_Chair as new layer. Place to look like it is 
on the sand.** Add drop shadow.

Copy and paste tube as new layer. Image flip Horizontal. Place her 
to look like she is sitting in the chair.** Add drop shadow 1,4,50,8.

Copy and paste IPD_CT_Trees new layer. Move to behind and left of chair.** 

Copy and paste IPD_CT_Torch as new layer. Move to behind the chair to look
like it is between the chair and trees.**

Copy and paste IPD_CT_Drinks as new layer. Move to right of chair.** 

Copy and paste IPD_CT_Frond  as new layer. Move to behind the drinks
infront of chair.** Add drop shadow. Duplicate Image free rotate
45 to the right.

Copy and paste IPD_CT_Seagull as new layer. Move to top right.**
Add drop shadow.

Copy and paste IPD_CT_Pretty as new layer.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/07/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Cancun Summer in the subject line.
Can't wait to check them out!


This tut was made using PSPx4
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Caron Vinson.
You need a license to use her work. You can get it 
and her work at Creative Design Outlet.
PTU kit Always by Hungry Hill.
You can get it at Mystical Scraps.
Mask of Choice I used MB and SW Mask 18 from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used Shelley Script LT Std.


Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

paper-5 - 75%
MB and SW Mask 18
frame-2 - 65%
tube - 85% or resized to fit
doodle - 1 85% 
fan - 40%
flower-vine - 50%
flower 6 - 35%
snail - 25%
light-effect-1 - 75%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste paper-5 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.

Copy and paste frame-2 as new layer. Add drop shadow.

Copy and paste Tube as new layer. Move to the left.**
Add drop shadow.

Copy and paste doodle as new layer. Move to last layer and then
to the right a bit.** Add drop shadow.

Copy and paste fan as new layer. Back on top layer..Move to 
bottom right corner.** Add drop shadow.

Copy and paste flower-vine as new layer. Move to the
top right corner.** Add drop shadow.

Copy and paste flower 6 as new layer. Move to in front of and 
bottom of fan.** Add drop shadow

Copy and paste snailas new layer. Move to bottom right.** 
Add drop shadow.

Copy and paste light-effect-1 as new layer.

Add proper copyright. url and Lic if required
and your name. And were done.

This tutorial was written by Rebecca Townsley on 8/07/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Fairy Flowers in the subject line.
Can't wait to check them out!