Showing posts with label Spring. Show all posts
Showing posts with label Spring. Show all posts
Tuesday, June 25, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Elias Chatzoudis.
You need a license to use his work. You can get it
and his work at Elias Art Shop.
FTU kit Spring Time Mini Kit by Tasha's Playground.
Mask of Choice I used Moonbeams and Spiderwebs mask 5.
You can get it Here.
Font of choice I used Vivacious.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
paper1
MB and SW Mask 5
frame2
grass-50%
tube
bunny-75%
butterflies-75%
pond
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste paper1 as new layer.
Move to bottom layer. Layers, new mask layer,
from image, find mask in the list, click ok
merge group.
Copy and paste frame2 as new layer.
Copy and paste grass as new layer. Put to left
of tag. Add drop shadow. Duplicate move to right
of grass, repeat this 2 more times. Merge the
grass layers together. Move to behind frame at
bottom of frame. Using Eraser tool erase any grass
overhang from sides and or bottom of frame.
Copy and paste tube as new layer. Move down a tad.**
Duplicate Blend Hardlight, merge down. On Frame
selections ,float, defloat, using eraser tool,
erase the hand and part of kneww on right of tube.
Makes it look like that part of the tube is in the
frame. Selections none. Add drops shadow to frame.
Copy and paste bunny as new layer. Move to bottom
left of frame.** Add drop shadow 0,0,62,15.
Copy and paste butterflies as new layer. Move to
top right of frame.** Same Drop shadow as on the
bunny.
Copy and paste pond as new layer. Move to bottom
of frame and then behind the grass layer.** Useing
eraser tool erase any overhang from pond on bottom
and or sides of frame.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 6/25/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Natures Fae in the subject line.
Can't wait to check them out!
Thursday, May 16, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Alex Prihodko.
You need a license to use his work. You can get it
and his work at Pics For Design.
PTU kit Daisies and Daffies by Scrappin Krazy Designs.
Mask MB and SW Mask 40 from Moonbeams and Spiderwebs.
Font of choice I used AdineKirnberg.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 35%
ele08
ele11
ele44
ele07
ele60
ele09 - 60%
ele12 - 40%
p11
MB and SW Mask 40
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste ele08 as new layer.
Add drop shadow.
Copy and paste ele11 as new layer
Copy and paste ele44 as new layer.
May have to move down just a tad.**
Add drop shadow.
Copy and paste tube as new layer.
Move down a tad.** Add drop shadow.
Copy and paste ele07 as new layer.
Move to just over bottom of tube.**
Duplicte, merge down, duplicate, merge down.
Copy and paste ele60 as new layer.
Add drop shadow.
Copy and paste ele12 as new layer. Move to
upper left of tag, duplicate, image, flip
horizontal, move over to right of tag and down
a tad.** Add drop shadows to both.
Copy and paste p11 as new layer.
Move to bottom layer. Layers, new mask layer,
from image, find mask in the list, click ok
merge group.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 5/16/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spring Hunk in the subject line.
Can't wait to check them out!
Thursday, May 9, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Angela Newman.
You need a license to use her work. You can get it
and her work HERE.
PTU kit Lovely Spring Day by Tasha's Playground.
Mask MB and SW Mask 14 from Moonbeams and Spiderwebs.
Font of choice I used PassionsConflictROB.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
tube - 60% or resized to fit if using another tube.
frame4
flowerscatter
bridge
bird
ribbon - 80%
jar - 80%
kitty - 50%
sparkle
paper5
MB and SW Mask 14
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste frame4 as new layer.
Add drop shadow.
Copy and paste flowerscatter as new layer.
Copy and paste bridge as new layer.
Move slightly to the bottom.**
Add drop shadow.
Copy and paste bird as new layer.
Move to left of bridge to look like it is
standing on the bridge.** Add drop shadow.
Copy and paste ribbon as new layer.
Move it to just under top of bridge.**
Add drop shadow.
Copy and paste jar as new layer.
Move to bottom left of bridge.**
Copy and paste kitty as new layer.
Move her over to bottom right of bridge.**
Add drop shadow.
Copy and paste sparkle as new layer.
Copy and paste paper5 as new layer.
Move to bottom layer. Layers, new mask layer,
from image, find mask in the list, click ok
merge group.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 5/09/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU A Fairy Spring in the subject line.
Can't wait to check them out!
Thursday, June 7, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
FTU Misfit Spring from Tasha's Playground HERE.
Tube of Choice . I am using Rachael Tallamy.
You need a lic to use her work. You can get it and her work at HERE.
Font of Choice I used Easy Street.You can get it HERE.
Template used Temp_23 by Twyzted T's Playroom. You can get it HERE.
Mask I used MB and SW Mask 5 by Moonbeams ans Spiderwebs.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template Shift+D Close the original.
Image - Canvas resize to 806x581
Using magic wand click on raster 6 Selections - invert
Open paper7 copy and paste as new layer delete.
Add drop shadow and erase any overhang from shadow.
Using magic wand click on raster 2 Selections - invert
Open paper8 copy and paste as new layer delete.
Add drop shadow and erase any overhang from shadow.
Open Tube resize by 75% copy and paste as new layer.
Place to left to look like she is sitting on bottom of box.**
Add drop shadow on seperate layer and erase the part of the
shadow from the wings.Then merge the tube layer down with the shadow layer.
Take magic wand and click on Copy of Raster 3.
Erase the part of the tube thats in that box. Keep selected.
Copy tube and paste again over copy of raster 3 image resize by 125%
move to right just a bit.** Selections - invert - delete. Selections none.
Using a light color from your tube. Flood fill raster 3 and copy of raster 3.
On raster 5 Adjust - add remove noise - add noise - 100% Add drop shadow.
Repeat for raster 4
On rastor 8 flood fill with color from tube Adjust
add/remove noise - add noise 100% add drop shadow
Repeat for following layer but use different colors from tube.
Rastor 9, Copy of rastor 9 , Copy(2) of raster 9,
copy(3) of rastor 9, copy(4) of rastor 9, rasters 7, 13,10 and 14.
I deleted layer 11 and 12.
Open flowers copy and paste as new layer at bottom right of tag.**
Add drop shadow Duplicate - image flip horizontal - flip vertical - move to
top left of tag then to under the tube layer.
Open bird resize by 75% copy and paste as new layer. Image - Flip horizontal
move to top right of tag** Add drop shadow.
Resize all layers by 71% so its not to big.
Open paper6 copy and paste as new layer and move all way to bottom.
Open your mask. Layers - New Mask Layer - from Image.
Find the mask in the list hit ok then Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name and your done.
This tutorial was written by Rebecca Townsley on 6/7/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Spring Fae Result in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)