Thursday, September 11, 2014



This tut was made using PSPx5.
And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used one by Arthur Crowe.
You need a license to use his work. You can get it 
and his work here at Arthur Crowe Factory.
PTU kit Fall Down Home by Amy Marie.
You can get it at The PSP Project.
Mask of choice. I used MB and SW Mask 14 by Moonbeams and Spiderwebs.
Font of choice. I used Adine Kirnberg.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

MB and SW Mask 14
pp11
91 (plant)
tube - 60% or resize to fit
43 (frame)
57 (grass)
42 (scarebear) - 60%
19 (turkey on log) - 40%
20 (free pumpkins) - 40%
21 (pumpkin patch sign) - 90%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste pp11 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste 91 (plant) as new layer. Move to right a bit.**
Duplicate move to left.**

Copy and paste tube as new layer. Add drop shadow.

Copy and paste 43 (frame) as new layer. Add drop shadow.
On tube layer selections, all, float, defloat. Erase on 
the frame layer over head.** Selections none.

Copy and paste 57 (grass) as new layer. Move to bottom left.**
Duplicate move to right.**

Copy and paste 42 (scarebear) as new layer. Move to bottom 
of tag.** Add drop shadow.

Copy and paste 19 (turkey on a log) as new layer. Move to 
right of tag and down a tad.** Add drop shadow.

Copy and paste 20 (free pumpkins) as new layer. Move under the
turkey.** Add drop shadow.

Copy and paste 21 (pumpkin patch sign) as new layer. Move to
bottom left of the tag.** Add drop shadow.


Add proper copyright. url and Lic if required.
Add name and your done. For more shadow effect duplicare name after
adding the drop shadow.

This tutorial was written by Rebecca Townsley on 9/11/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Pumpkin Patch in the subject line
Can't wait to check them out!




This tut was made using PSPx5.
And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used one by Wendy Gerber.
You need a license to use hers work. You can get it 
and her work here at Tubes 4 Taggers.
PTU kit The Vampire Seduction by Wicked Princess Designs.
You can get it at The PSP Project.
Mask of choice. I used Mask 43 MB and SW by Moonbeams and Spiderwebs.
Font of choice. I used Day of the Tentacle.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Mask 43 MB and SW
WP_VS_PP20 - 75%
WP_VS_CASTLE - 65%
WP_VS_TREE4 - 85%
WP_VS_FOILAGE - 85%
Tube - 65% or resize to fit
WP_VS_GRASS2 - 55%
WP_VS_CLOUD
WP_VS_CLOUD2 - 95%
WP_VS_WINGEDSKULL - 65%


When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste WP_VS_PP20 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group

Copy and paste WP_VS_CASTLE as new layer. Move up and to the right
a bit.**

Copy and paste WP_VS_TREE4 as new layer. Move to the right.**

Copy and paste WP_VS_FOILAGE as new layer. Move to the left.**

Copy and paste tube as new layer. Move down or up a bit.**
Add drop shadow.

Copy and paste WP_VS_GRASS2 as new layer. Move down to bottom of
the tube.**

Copy and paste WP_VS_CLOUD as new layer. Move to over Grass layer.**

Copy and paste WP_VS_CLOUD2 as new layer. Move to over other cloud layer.**

Copy and paste WP_VS_WINGEDSKULL as new layer. Move to bottom of tag.**
Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 9/11/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Dia Delos Muertos in the subject line
Can't wait to check them out!

Thursday, September 4, 2014


This tut was made using PSPx4.
And knowledge of PSPx4.

Supplies needed 

Tube of choice. I used one by Kaci McVay.
You need a license to use her work. You can get it 
and her work here at The PSP Project.
PTU kit Kiss This by Scrapping Krazy Designs.
Mask of choice. I used MB and SW Mask 8 by Moonbeans and Spiderwebs.
Font of choice. I used P22 Corinthia.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

MB and SW Mask 8 
p04 - 75%
ele66 
ele64 - 85%
tube - 65% or resize to fit
ele65 - 85%
ele04 - 65%
ele03 - 45%

When you see ** look at tag to see placement for Elements. 
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 
I have made a tag or to and not check and when I got done 
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600 x 600. 

Copy and paste p04 as new layer. Layers, New Mask layer. 
Find the mask in the list Click ok. Merge group. Duplicate
Merge down.

Copy and paste ele66 as new layer. Move to bottom**, duplicate
Move up. Repeat this 2 more times.
Add drop shadow.

Copy and paste ele64 as new layer. 
Add drop shadow.

Copy and paste tube as new layer. Add drop shadow. Move behind
frame. Selections, all float, defloat erase just top part
of frame. Selections none.

Copy and paste ele65 as new layer. Move to bottom.**
Add drop shadow.

Copy and paste ele04 as new layer. Move to bototm of speakers.**
Add drop shadow.

Copy and paste ele03 as new layer. Move to behind the speakers
and to the right.** Add drop shadow, duplicate move to left.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial was written by Rebecca Townsley on 9/04/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Selfie in the subject line
Can't wait to check them out!