Showing posts with label Scrappin Krazy Designs CT. Show all posts
Showing posts with label Scrappin Krazy Designs CT. Show all posts
Tuesday, January 27, 2015
Using the work of Scraping Krazy Designs
Her PTU kit Pink Attitude.
Info on how to get it HERE.
Tube used is by SoulDesigner at Pics For Design.
Snags are below!
Thursday, December 18, 2014
*Let it Snow*
Using PTU kit Ice Princess by
Scrapping Krazy Designs.
To see where you can get the kit go
Below are some snags please enjoy!!
Sunday, October 19, 2014
Saturday, October 4, 2014
Thursday, September 4, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Kaci McVay.
You need a license to use her work. You can get it
and her work here at The PSP Project.
PTU kit Kiss This by Scrapping Krazy Designs.
Mask of choice. I used MB and SW Mask 8 by Moonbeans and Spiderwebs.
Font of choice. I used P22 Corinthia.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
MB and SW Mask 8
p04 - 75%
ele66
ele64 - 85%
tube - 65% or resize to fit
ele65 - 85%
ele04 - 65%
ele03 - 45%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste p04 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group. Duplicate
Merge down.
Copy and paste ele66 as new layer. Move to bottom**, duplicate
Move up. Repeat this 2 more times.
Add drop shadow.
Copy and paste ele64 as new layer.
Add drop shadow.
Copy and paste tube as new layer. Add drop shadow. Move behind
frame. Selections, all float, defloat erase just top part
of frame. Selections none.
Copy and paste ele65 as new layer. Move to bottom.**
Add drop shadow.
Copy and paste ele04 as new layer. Move to bototm of speakers.**
Add drop shadow.
Copy and paste ele03 as new layer. Move to behind the speakers
and to the right.** Add drop shadow, duplicate move to left.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 9/04/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Selfie in the subject line
Can't wait to check them out!
Thursday, July 31, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Graph Freaks.
Her tubes are PTU but you do not need a lic. You can get it
and her work here at GraphFreaks.
http://graphfreaks.com/
PTU kit Rainbow Kazuki by Scrapping Krazy Designs.
http://scrappinkrazydesigns.blogspot.com/2014/07/new-ptu-kit-rainbow-kazuki.html
Mask of choice. I used Mask 44 MB and SW by Moonbeams and Spiderwebs.
http://moonbeamsandspiderwebs.blogspot.com/2012/09/mask-44-and-forum-mask-25.html
Font of choice. I used Ravie.
http://fontzone.net/font-details/ravie
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Mask 44 MB and SW
p17 - 75%
ele39 - 85%
Tube - 90% or to fit
ele37 - 75%
ele24 - 85%
ele26 - 50%
ele29 - 40%
ele12 - 50%
ele04 - 50%
ele05 - 35%
ele32 - 20%
ele35
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste p17 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste ele39 as new layer. Add drop shadow.
Copy and paste tube as new layer and move to under frame layer.**
Add drop shadow. Seletions all, Float, Defloat. Go to frame layer
and erase the part over her arms and head. Seletiond none.
Copy and paste ele37 as new layer. Move to bottom right of tag.**
Add drop shadow.
Copy and paste ele24 as new layer. Move to bottom left of tag.**
Copy and paste ele26 as new layer. Move to top right of frame.**
Copy and paste ele29 as new layer. Move to bottom of frame.
Copy and paste ele12 as new layer. Move to bottom right of tag.**
Add drop shadow.
Copy and paste ele04 as new layer. Images Flip Horizontal. Move to
bottom right of tag.** Add drop shadow.
Copy and paste ele05 as new layer. Move to top left of frame.**
Add drop shadow.
Copy and paste ele32 as new layer. Move to infrom and left of bunny.**
Add drop shadow.
Copy and paste ele 35 as new layer.
I used Inner Bevel on the name settings are
Bevel #7 width 31
Smoothness - 44
Depth - 2
Ambience - -8
Shininess - 17
Angle - 315
Intensity - 69
Elevation - 21
Color - White
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/31/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Rainbow Kazuki in the subject line.
Can't wait to check them out!
Thursday, July 10, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Selina Fench.
You need a license to use her work. You can get it
and her work here at Fairies and Fantasy.
PTU kit Pirates Ahoy by Scrappin Krazy Designs.
Mask of choice. I used Mask 41 MB and SW by Moonbeans and Spiderwebs.
Font of choice. I used BadDog.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Mask 41 MB and SW
p04 - 75%
tube - to fit
frame - ele03 - 80%
anchor - ele68
sand - ele39 - 85%
flat money - ele15 - 50%
plant - ele26 - 50%
flag - ele64 - 35%
rock - ele42 - 35%
rocks - ele50 - 35%
steering w ele89 - 35%
shells - ele80 - 35%
spyglass - ele91 - 35%
map - ele92 - 35%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste p04 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste tube as new layer.
Copy and paste ele03 as new layer.
Copy and paste ele68 as new layer. Move to right of frame.
On the tube selections all, float, defloat. Erase frame and
anchor from top over mermaid. Selections none. add drop
shadow to frame, tube and anchor.
Copy and paste ele39 as new layer. Move to bottom of tag.**
Copy and paste ele15 as new layer. Move slightly yo right.**
Add drop shadow.
Copy and paste ele26 as new layer. Move to right of tag.**
Add drop shadow
Copy and paste ele64 as new layer. Move to over plant.**
Add drop shadow.
Copy and paste ele42 as new layer. Move to right of tag.**
Add drop shadow.
Copy and paste ele50 as new layer. Move just to left of
Big rock.** Add drop shadow.
Copy and paste ele89 as new layer. Move to bottom left
of tag.** Add drop shadow.
Copy and paste ele80 as new layer. Move just to right of
the Wheel** Add drop shadow.
Copy and paste ele91 as new layer. Move over sheels and
wheel.** Add drop shadow.
Copy and paste ele92 as new layer. Move to right over
rocks.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/10/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Pirate Mermaid Ahoy! in the subject line
Can't wait to check them out!
Wednesday, June 11, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Barbara Jensen .
You need a license to use her work. You can get it
and her work here at Barbara Jensen Tubes.
PTU kit Sweet Natalie by Scrappin Krazy Designs.
Template used 116 by Blissfully Beth.
Mask of choice. I used Mask 47 MB and SW
Font of choice. I used Dobkin.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Template 116
p08
p02
p10
ele55
ele75
ele80
ele78
ele67
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open Template Shift+D to duplicate close original.
Delete the credits and background layer.
On Vert Line 1 Selections all Float Defloat invert.
Copy and paste p08 as new layer over that, Delete
Selections none. Add drop shadow. Delete Vert line 1 repeat same for
vert line 2 and 3 layers of template.
Using p02 repeat same process on pink 1, 2 and 3 layers of
template.
On Pink Oval layer of template add drop shadow.
On WARNING layer Seletions all float defloat invert.
Paste p10 over that and then delete. Selections none.
Copy and paste tube as new layer just over the white oval.
Move to righ.** Add drop shadow.
From top layer in template
Copy and paste ele55 as new layer. Move to bottom right.
Copy and paste ele75 as new layer. Move to under ele55.**
Add drop shadow.
Copy and paste ele80 as new layer. Move to under tube.
Place at top part of ovals.** Add rop shadow.
Copy and paste ele78 over WARNING layer. Image Free roatate
45 to the right. Move to the left just over bow.**
Add drop shadow.
Copy and paste ele67 as new layer. Move to over Pink
background layer.
Copy and paste ele51 as new layer. Move to under white oval
and to the left. Images Flip Horizontal. ** Add drop shadow
to it and the white oval.
Copy and paste p10 as new layer. Move to bottom layer.
Layers, New Mask layer. Find the mask in the list Click ok.
Merge group. Resize all layers to 600x600
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 6/11/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
WARNING in the subject line
Can't wait to check them out!
Wednesday, November 6, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Pris by Eos Sparks.
You need a license to use her work. You can get it
and her work at The Psp Project.
PTU kit Revamped *The Raven* by Scrappin Krazy Designs.
Mask of Choice I used Mask 50 MB and SW by Moonbeams and Spiderwebs.
Font of choice I used Typewriter Oldstyle.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
p01
Mask 50 MB and SW
ele12
p07 - 75%
p13 - 75%
p04 - 75%
ele59 - 85%
ele25 - 95%
ele07
ele40
ele19 - 65%
ele43 - 75%
ele22
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste p01 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.
Copy and paste ele12 as new layer.
Add drop shadow settings 0,2,100,9.
Copy and paste p07 as new layer. Move to under frame layer.
Using magic wand Click inside the top part of the frame, selections,
modify, expand by 10, invert, on the paper layer delete, selections none.
Repeat same with p13 , middle frame and p04 and top frame.
Copy and paste tube as new layer. Move to under frame layer just
tha paper for top frame. Place what part you want showing in the
frame and erase what is showing on outside of frame. Repeat for
middle frame.
Copy and paste Tube as new layer. Move to above frame layer.
Add drop shadow. Selections all, float, defloat. On frame layer erase
part of frame that is over top and middle part of tube. Erase bottom
of tube. This will make it look like she is standing out of the frame.
Copy and paste ele59 as new layer. Move to bottom right of tag.**
Copy and paste ele25 as new layer. Move to left of tag.**
Add drop shadow
Copy and paste ele27 as new layer. Move to upper right of tag,
and make first layer.**
Copy and paste ele40 as new layer. Make top layer and move to top
of tag.** Add drop shadow.
Copy and paste ele19 as new layer. Move to bottom left of tag.**
Add drop shadow.
Copy and paste ele43 as new layer. Using pick tool rotate a bit to
the right, move to above frame layer and just to top of the middle
frame.** Add drop shadow.
Copy and paste ele22 as new layer. Move to top duplicate move to middle
duplicate and move that one to bottom.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on //13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Raven in the subject line.
Can't wait to check them out!
Saturday, November 2, 2013
I know Halloween is over so I tried to make this look
more Gothic using a Halloween kit!
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Susan Justice.
You need a license to use her work. You can get it
and her work at *Coming Soon*
PTU kit Wytchs Night by Scrappin Krazy Designs.
Mask of Choice I used Mask Creative misfits week 5 grunge masks.
grungemask2byjenny. You can get it Here.
Font of choice I used Trinigan FG.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
p13 - 75%
Mask Creative misfits week 5
grunge masks - grungemask2byjenny
tube - 85%
ele48
ele52 - 50%
ele03 - 75%
ele43 - 50%
ele20 - 75%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste p13 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.
Copy and paste tube as new layer. Move slightly to the left.**
Add drop shadow of 2,2,100,7.
Copy and paste ele48 as new layer.
Add drop shadow.
Copy and paste ele52 as new layer. Move to upper right.**
Add drop shadow.
Copy and paste ele03 as new layer. Move him to the right a bit.**
Add drop shadow.
Copy and paste ele43 as new layer. Move to bottom right of the reaper.**
Add drop shadow.
Copy and paste ele20 as new layer. Move to
bottom of tag.** Add drop shadow.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 11/02/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Wytchs Night in the subject line.
Can't wait to check them out!
Thursday, August 29, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one Cris Delara.
You need a license to use her work. You can get it
and her work at The PSP Project.
PTU Kit Rockin Angel by Scrappin Krazy Designs.
Mask of Choice I used MB and SW Mask 17 from Moonbeams and Spiderwebs.
You can get it Here.
Font of choice I used BlackChancery.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
p17 - 75%
MB and SW Mask 17
ele57
ele01
ele03
tube - 80% or resized to fit
ele07
ele50 - 50%
ele13
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste p17 as new layer. Layers, new mask layer
choose the mask from the list click ok Merge group.
Copy and paste ele57 as new layer.
Add drop shadow.
Copy and paste ele01 as new layer.
Copy and paste ele03 as new layer.
Add drop shadow.
Copy and paste Tube as new layer.
Add drop shadow.
Copy and paste ele07 as new layer. Move to bottom of tube.
Add drop shadow. On tube Selections all, float, defloat,
On Speakers layer using eraser tool erase only the part
over her hand and arm. Selections none.
Copy and paste ele50 as new layer. Using pick tool rotate
it just a tad to the left and move to bottom right of the
speakers.** Add drop shadow.
Copy and paste ele13 as new layer. Move to bottom left of
tag.** Add drop shadow.
Add proper copyright. url and Lic if required
and your name. And were done.
This tutorial was written by Rebecca Townsley on 8/29/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Rockin DJ in the subject line.
Can't wait to check them out!
Tuesday, August 20, 2013
Tuesday, July 23, 2013
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Keith Garvey.
You need a license to use his work. You can get it
and his work at Garv Girls PSP Tubes.
PTU kit American Beauty by Scrapping Krazy Designs.
Mask of Choice I used Mask 44 MB and SW from Moonbeams and Spiderwebs.
Fonts of choice.
Used for words - AdimeKirnberg.
Used for name - Adorable.
Eyecandy 4000 Gradient Glow
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
p12 - 75%
Mask 44 MO and SW
ele94
tube ds 2,2,86,15
ele61
ele68 - 50%
ele56 - 50%
ele40 - 50%
ele72 - 50%
ele86
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
You do not have to add drop shadow...I just do it for effects.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste p12 as new layer. Layers, new mask layer, from image
Choose your mask in the list, click ok, merge group.
Copy and paste ele94 as new layer.
Copy and paste Tube as new layer. Move to where her hat is just above
the frame.** Add drop shadow settings, 2,2,86,15. On frame selections
all, float, deflaot. On tube erase only some of the bottom to look
like she is coming out of the frame. Selections none.
Copy and paste ele61 as new layer. Move down to bottom of frame.**
Copy and paste ele56 as new layer. Move to bottom right of tag.**
Add drop shadow.
Copy and paste ele68 as new layer. Move to just behind the log.**
Copy and paste ele40 as new layer. Move to over the log.** Add
drop shadow. On the log Selections all float defloat. On horse
erase just tha back legs to make the hors look like it is
standong over the log.
Copy and paste ele72 as new layer. Move to top right of frame.**
Add drop shadow.
Copy and paste ele86 as new layer. Move down just a tad.**
Add proper copyright. url and Lic if required.
If you wish to, Add the words *Winds of Change* to the top of
tag. Eyecandy 4000 gradient glow using these settings from top
to bottom. 6.00, 25, 100 Color white. Click ok. Add drop shadow
settings 2,2,100,8, Blend Luminance(L). Repeat same process for
your name and were done.
This tutorial was written by Rebecca Townsley on 7/23/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Winds of Change in the subject line.
Can't wait to check them out!
Subscribe to:
Posts
(Atom)