Archive
- 2022 (3)
- 2021 (1)
- 2020 (2)
- 2018 (8)
- 2017 (1)
- 2016 (3)
- 2015 (13)
-
2014
(42)
- December (2)
- November (3)
-
October
(9)
- CT Tut for Wendy Gerber *Disturbed*
- CT Tut for Scrap Candy *Boo Halloween*
- CT Tut for The PSP Project *Zombie Birthday*
- CT Tags and Clustor Frames for Scrapping Krazy Des...
- CT Tags and Snags for Tasha's Playground and Wendy G.
- Mixed CT for Tasha Playground using *Jennifer Jane...
- CT Tag using Scrapping Krazy Designs PTU kit Fanta...
- CT Tags for Scrap Candy using Wicked Creations kit...
- CT Tags for Rissa's Designs using *Spooks in the N...
- September (3)
- August (8)
- July (8)
- June (4)
- May (2)
- January (3)
- 2013 (63)
- 2012 (47)
- 2011 (19)
Saturday, October 25, 2014
This tut was made using PSPx5.
And knowledge of PSPx5.
Supplies needed
Tube of choice. I used one by Wendy Gerber.
You need a license to use her work. You can get it
and her work here at Mystical Scraps.
She also has her own store called Tubes 4 Taggers.
FTU kit Evil Ann and Andy by Wicked Princess Scraps.
Mask of choice. I used Mask 56 MB and SW by Moonbeams and Spiderwebs.
Font of choice. I used Angry Blue.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Mask 56 MB and SW
WP_EAA_PP10 - 75%
WP_EAA_BARBEDWIREFRAME - 65%
WP_EAA_CHAINEDBLEADINGHEARTS - 50%
Tube - 15% or resize to fit
WP_EAA_CORNER - 65%
WP_EAA_DISTURBEDWORDART - 50%
WP_EAA_SKELOTONHANDSINCAN - 35%
WP_EAA_BOTTLES - 35%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste WP_EAA_PP10 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group. Dupicate, Merge
down.
Copy and paste WP_EAA_BARBEDWIREFRAME as new layer. Add drop shadow.
Copy and paste WP_EAA_CHAINEDBLEADINGHEARTS as new layer. Move to top
left of frame.** Add drop shadow.
Copy and paste Tube as new layer. Add drop shadow.
Copy and paste WP_EAA_CORNER as new layer. Move to bottom
right of tag.** Add drop shadow.
Copy and paste WP_EAA_DISTURBEDWORDART as new layer. Move to
top of tag.** Add drop shadow.**
Copy and paste WP_EAA_SKELOTONHANDSINCAN as new layer. Move to
bottom right of tag.** Add drop shadow.
Copy and paste WP_EAA_BOTTLES as new layer. Move to bottom
left of tag.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 10/25/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Disturbed in the subject line
Can't wait to check them out!
Friday, October 24, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Barbara Jensen.
You need a license to use her work. You can get it
and her work here at Barbara Jensen Tubes.
PTU kit Cheeky Trixster by Toxic Desires.
You can get it Scrap Candy Store.
Font of choice. I used Brush Script STD.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Moon
Frame 2 - 75%
tube - 75% or resize to fit
Splatter
Spider - 50%
Bat - 40%
Bat in a Box - 40%
Wordart - 50%
Sparkles
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste Moon as new layer. Add drop shadow.
Copy and paste Frame as new layer. Add drop shadow.
Copy and paste Tube as new layer. Move to right of tag.**
Add drop shadow.
Copy and paste splatter and move to upper left. Duplicate
Move to right of tag. Merge down, Duplicate Move down to
bottom of tag.**
Copy and paste Spider as new layer. Move to top left.**
Add drop shadow.
Copy and paste Bat as new layer. Move to bottom left of tag.**
Add drop shadow.
Copy and paste Bat in a Box as new layer. Move to bottom
right of tag.** Add drop shadow.
Copy and paste Wordart as new layer. Move to bottom of tag.**
Add drop shadow.
Copy and paste Sparkles as new layer.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 10/24/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Boo Halloween in the subject line
Can't wait to check them out!
Thursday, October 23, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Zombie Birthday by Joahannah von Frankenstein.
You need a license to use her work. You can get it
and her work here at The PSP Project.
Also Using the matching PTU kit Zombie Birthday by Wicked Princess Scraps.
Also available at The PSP Project.
Template of Choice. I used by Timeline Banner #2 made by ME Designz by BabyDragon.
Font of choice. I used ZOMBIFIED.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Timeline Banner Template #2
tube - 75%
WP_ZB_PP6
WP_ZB_PP5
WP_ZB_PP9 - 50%
WP_ZB_PP1
WP_ZB_CANDY3 - 30%
WP_ZB_HANDS1
WP_ZB_GIFT1 - 20%
WP_ZB_GIFT2 - 20%
WP_ZB_BEAR - 40%
WP_ZB_CUPCAKE1 - 40%
WP_ZB_BOW - 75%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open the template and hit shift+d to duplicate.
Close original. Delete the Info layer and on the Avitar
spot change opacity to 25 for now so you can still see it
but under it as well. This will be deleted when done.
Delete word layer.
Change forground to pattern using WP_ZB_PP6 and flood fill
Background layer.
Now chsnge pattern to WP_B_PP5 and flood fill layer 1.
Add drop shadow.
Merge Layer 5 down to 4 and merge that layer down as well
so all three circles are on same layer. Selections all - Float
defloat - invert.
Copy and paste WP_ZB_PP9 as new layer. Move to ovet the circles.
Delete, Selections none. Add drop shadow.
Change forground to pattern using WP_ZB_PP1 and flood fill
Layers 6 and 7. Add drop shadow.
Copy and paste Tube as new layer. Move to the right of template
and place as top layer. Add drop shadow.
On the balloon layers using Manual Color Correction change color
of ballons to a color from the tube. Duplicate, Effects 3D, Cut out
Settings Offset Vertical 0 Horizontal 0 Opacity 100 Blur 36
Color a darker color then what the balloon is. Hit ok Merge down.
Add drop shadow to both.
Copy and paste WP_ZB_HANDS1 as new layer over the stripes layer.
Add drop shadow.
Copy and paste WP_ZB_BOW as new layer over the hands. Move down
a bit.** Add drop shadow.
Copy and paste WP_ZB_BEAR as new layer over the tube layer. Move
to the right of tag.** Add drop shadow.
Copy and paste WP_ZB_GIFT2 as new layer. Move to left of bear.**
Add drop shadow.
Copy and WP_ZB_CUPCAKE1 as new layer and move just to the right of
the grey avi square.** Add drop shadow.
Copy and paste WP_ZB_GIFT1 as new layer and move to the right
of the cupcake.** Add drop shadow.
Copy and paste WP_ZB_CANDY3 as new layer. Move to just over the grey
avi square to look like it it sitting on top of it.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 10/23/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Zombie Birthday in the subject line
Can't wait to check them out!
Sunday, October 19, 2014
Saturday, October 11, 2014
Mixed CT for Tasha Playground using *Jennifer Janesko 97-2 CDO Inspired by Kit* and Wendy G FTU tube
Both tags made using
Jennifer Janesko 97-2 CDO Inspired by Kit
made by Tasha's Playground and available at
.And the tube on bottom is a FTU tube by
Wendy G.
Was made in honor of Susan Justice's daughter
who passed away.
Tube can be found at
Saturday, October 4, 2014
Wednesday, October 1, 2014
Wonderful kit by Rissa's Designs Called
Spooks in the Night
For info on how and where to get
this kit just click HERE!
Subscribe to:
Posts
(Atom)
Blogroll
Categories
- *Coming Soon*
- 4th of July
- American
- Animals
- Animation
- Arthur Crowe
- Barbara Jensen
- BCA
- Blabs
- CDO
- Charles Bristow
- Christmas
- Clustor Frames for CT
- Creative Design Outlet
- Creative Scraps CT
- CT Facebook Banner
- CT Snags
- CT Tags
- DBV Masks
- Dragons
- DreamScape Imaging
- Elegant Inspirations
- Elias Chatzoudis
- Elizabeth Austin
- FaceBook Timeline
- Fairytale
- Fall
- Fantasy
- Forum Set
- FourXDesigns
- Foxys Designz
- Freeks Creations CT
- FTU
- Goth
- GraphFreaks
- Halloween
- Irish Princess Designs CT
- Joel Adams
- Jose Cano
- June 2018
- Justice Howard
- Keith Garvey
- Mellows Graphics
- Millies PSP Madness
- Moonbeams and Spiderwebs masks
- Mystical Scraps
- Mystical Scraps CT
- New Years
- No Flutter
- No Kit
- No Tube
- PFD Kit
- PicsforDesign
- Pink Kit CT
- Pinup Toons
- PSP 2022 Ultimate
- PTU
- PTU now FTU
- PTU tutorial
- PU Only
- Rabid Designs CT
- Rachael Tallamy
- Red White and Blue
- Rissa's Designs
- Rissa's Designs CT
- Scrap Candy CT
- Scrappin Krazy Designs CT
- Scrapping With Friends
- Selina Fench
- Simple Blog Tuts
- Snag Set
- SoulDesigner CT
- Spring
- St. Patricks Day
- Summer
- Sunny Rose
- Sybile Art
- Tashas Playground CT
- The Hunter
- The PSP Project
- The PSP Project CT
- Tony T
- Tubes 4 Taggers
- Twyzted T's Playroom
- Valentines
- Veterans Day
- Video Tutorial
- Vineger
- Wendy Gerber
- Wendy Gerber CT
- Wicked Princess Scraps
- Wicked Princess Scraps CT
- Winter
- XeracX
- Zindy Nielson