These tags were made using the wonderful winter kit by Freeks creations called Snow Much Fun. 

It has 61 elements and 11 papers of wonderful winter fun! You can get this kit at the following stores. 

Mystical Scraps

Scraps N Company

And you can find more of her stuff at those stores and her other store.

Dances in the Rain

You can also find more information about her items and check for new and upcoming stuff on her blog. 

Freeks Creations

This tut was made using PSPx7.
And knowledge of PSPx7.

Supplies needed

PTU kit "Amok Amok Amok" by "Creative Scraps by Crys".
Sold at the following Stores.

Mystical Scraps

Scraps and Company

Mask "MB and SW Mask 84" by "Moonbeams and Spiderwebs".
Font of choice. I used "Vladimir Script".

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

AAA_Paper_2 = 75%
MB and SW Mask 84
AAA_Element_28 (tree) = 90%
AAA_Element_3 (black hair sister) = 50%
AAA_Element_2 (blonde hair sister) = 50%
AAA_Element_1 (red hair sister) = 50%
AAA_Element_12 (cauldron) = 75%
AAA_Element_40 (sparkles)


When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600x600.

Copy and paste AAA_Paper_2 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group.

Copy and paste AAA_Element_28 (tree)as new layer.

Copy and paste AAA_Element_3 (black hair sister) as new layer and move to left.** Add drop shadow.

Copy and paste AAA_Element_2 (blonde hair sister) as new layer and move to right.** Add drop shadow.

Copy and paste AAA_Element_1 (red hair sister) as new layer. Make sure she is center of the other two.** Add drop shadow. 

Copy and paste AAA_Element_12 (cauldron) as new layer. Move down a bit.**

Copy and paste AAA_Element_40 (sparkles) as new layer.

Shadow I used on words is as follows 2.2.100.3

Add proper copyright. url and Lic if required.
With just using a kit like I did with this one, you would put
Kit "Amok Amok Amok" by Creative Scraps by Crys www.sinfullycreativescraps.blogspot.com
Add name and your done.

This tutorial "I put a Spell on you" was written by Rebecca Albertson on 10/24/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"I put a Spell on you" tut in the subject line.
Can't wait to check them out!

This wonderful Autumn kit called Painted Leaves by Freeks Creations has 82 Elements and 14 Papers! So much that you can make a multitude of tags with it. As you can see above, I have these two tags made with her kit. You can get this kit at the following stores!

Mystical Scraps

Scraps and Company

For more of her products also check out those stores, her other stores, and her blog!
Dances in the Rain Scraps
Freeks Creations

These tags were made using the Awesome kit "My Happy Ending" made by Creative Scraps by Crys. This kit has 77 Elements and 14 Papers. You can get this kit at the following stores...

Scraps & Company

Dance in the Rain

You can also get many more of her wonderful creations there and at Mystical Scraps.

For more information on all her products just go check out her Blog!

Creative Scraps By Crys Blog.

This tut was made using PSPx7.
And knowledge of PSPx7.

Supplies needed

PTU kit "Fantasy Forest" by "Freeks Creations". You can get it at the following stores.

Mystical Scraps
Scraps and Company
Dance in the Rain Scraps

Tube of choice, I used "Hedgies in Love" by "Laguna".
You can get it at Pics For Design.
Mask "Sparkle Floral Mask 2017 LNL" by "Leather and Lace Ads".

Font of choice. I used "Country Side" by Billy Argel.
This is a personal use only font. 

Must contact designer for Commercial Use.
You can get font at Font Space.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Paper5- 75%
Splash
Path
Swing
Vines- 60%
Mushroom- 30%
Mushroom2- 20%
Fairy- 50%
Tube- Resize to fit
Light
Glitter
Wordart

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600x600.

Copy and paste Paper5 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group.

Copy and paste Splash as new layer.

Copy and paste Path as new layer. Move down just a tad.**

Copy and paste Swing as new layer. Move to the right just a tad.**
Add a drop shadow.**

Copy and paste Vines as new layer. Image- Flip- Horizontal.
Move to in front of the swing.**
Add a drop shadow.

Copy and paste Mushroom as new layer.
Move to bottom right in front of vines a tad.**
Add a drop shadow.

Copy and paste Mushroom2 as new layer.
Move to bottom right of first mushroom.**
Add a drop shadow.

Copy and paste Fairy as new layer. Move to left of mushrooms a bit.**
Add a drop shadow.

Copy and paste Light as new layer. Move to left of tag.**

Copy and paste Tube as new layer. Move it to the bottom left of tag.**

Copy and paste Glitter as new layer.

Copy and paste Wordart as new layer. Move to bottom of tag.**
Add a drop shadow of 2.2.100.6.

Add proper copyright. url and Lic if required.
Add name and your done. With the name on this one I used a color from the kit with a white outline stroke of 1. and add a drop shadow of 2.2.100.6

This tutorial "Hedge Hog Magik Love" was written by Rebecca Albertson on 8/1/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Hedge Hog Magik Love" tut in the subject line.
Can't wait to check them out!

This tut was made using PSPx9.
And knowledge of PSPx9.

Supplies needed

 

PTU kit "Country Kitchen" by "Creative Scraps by Crys". 

It has 128 elements and 14 papers and can be found at

Mystical Scraps
Dance in the Rain Scraps
Scraps and Company

 

Tube of choice, I used "199-3" by "Pinup Toons" which can be found at CDO.

Mask "MB and SW Mask 84" by "Moonbeams and Spiderwebs".

Font of choice. I used "Script MT Bold". I think it is one that comes with every computer,
but in case you do not have it a similar font can be gotten HERE.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

CK_Paper (11) - 75%
CG_Element (101) - 96%
CG_Element (106) - 96%
CG_Element (24) - 30%
Tube of choice resized to fit
CG_Element (108) - 70%
CG_Element (5) - 75%
CG_Element (84) - 30%
CG_Element (39) - 15%
CG_Element (33) - 30%

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600x600.

Copy and paste CK_Paper (11) as new layer. Layers, New Mask layer, from image, Choose MB and SW Mask 84, invert mask data unchecked, click ok and then merge group. Find the mask in the list Click ok. Merge group

Copy and paste CG_Element (101) as new layer. Add a drop shadow of 0.0.100.0.

Copy and paste CG_Element (106) as new layer.

Copy and paste CG_Element (24) as new layer. Move to the top left of the tag.** Add a drop shadow.

Copy and paste tube as new layer. Add a drop shadow.

Copy and paste CG_Element (108) as new layer. Move to left of tag.** Add drop shadow. Duplicate image, Image - Mirror Horizontal.

Copy and paste CG_Element (5) as new layer. Images - Free rotate to the left at 90°. Move to bottom of tag.** Add a drop shadow.

Copy and paste CG_Element (84) as new layer. Move to bottom left of tag.** Add a drop shadow.

Copy and paste CG_Element (39) as new layer. Move to in front of tea pot.** Add a drop shadow.

Copy and paste CG_Element (33) as new layer. Move to in front of the mug.** Add drop shadow.

Add proper copyright. url and Lic if required.
Add name and your done.

This tutorial "Tea Time" was written by Rebecca Albertson on 7/23/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"Tea Time" tut in the subject line.
Can't wait to check them out!

This tut was made using PSPx9.

And knowledge of PSPx9.

Supplies needed

PTU kit "America's Birthday" by "Freeks Creations".

You can get it at the following stores.

Mystical Scraps
Scraps and Company
Dance in the Rain Scraps
Follow her on her blog is HERE for updates on new stuff.

Tube of chose was "Lrya" by "Jose Cano".
Fonts of choice. I used "Beautiful Lovers", which is personal use unless you contact the designer for permission and,  "Wakanda", which is also personal use unless you contact the designer for permission. Both which are at Fontspace.com

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

Splash
Confetti
Balloon
Frame2 - 85%
Tube - resized to fit**
Leaves2 
Glitter2
Butterfly - 40%
Eagle - 40%
Firework - 40%
Firework2 - 35%

When you see ** look at tag to see placement for Elements.

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.10 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.

I have made a tag or to and not check and when I got done

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 600x600.

Copy and paste  as new layer. Layers, New Mask layer.

Find the mask in the list Click ok. Merge group

Copy and paste Splash as new layer.

Copy and paste Confetti as new layer.

Copy and paste Balloon as new layer and add a drop shadow.

Copy and paste Frame2 as new layer and add a drop shadow.

Copy and paste tube as new layer, resized to fit.** Move to behind the frame layer. Selections - select all, Selections - float, Selections - defloat. Click on the frame layer and using eraser tool, only erase the part of the frame to make it look like she is coming out of the frame.** Selections - none and add a drop shadow.

Copy and paste Leaves2 as new layer and move to the bottom.** Add a drop shadow Duplicate layer, Images - flip - horizontal.

Copy and paste Glitter2 as new layer.

Copy and paste Butterfly as new layer, moving to the bottom of the tag.** Add a drop shadow.

Copy and paste Eagle as new layer and move to the top left of the tag.** Add a drop shadow.

Copy and paste Firework as new layer and move to the top right of tag.**

Copy and paste Firework2 as new layer and place just below and to the left of the first Firework.

Erase any hang over of tube you see at bottom. If using same tube as me, it was a little bit of her legs.

Using the Beautiful Lovers font I have typed out "Proud to be an American" With the font centered, leading -0.500. You can place it how and where you want if you choose to add it.

Add proper copyright. url and Lic if required.

Add name and your done. I used the Wakanda font for the name with a drop shadow of 2.2.100.10 on word art and name.

This tutorial "Proud to be An American" was written by Rebecca Albertson on 7/18/18.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

"Proud to be an American" tut in the subject line.

Can't wait to check them out!

This tut was made using PSPx9.
And knowledge of PSPx9.

Please bare with me as I have not written a tut in almost a year,

if not in over a year.

Supplies needed

PTU kit Attitude Adjustment by Creative Scraps by Crys. 

You can get it at these stores.
Mystical Scraps 

Scraps and Company 

Dance in the Rain Scraps 

Font of choice. I used Unicorns are Awesome which is PU only unless you contact the designer.

Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.

AA_Paper_3
AA_Element_28 (Colored Swirl Clouds)
AA_Paper_2
AA_Element_18
AA_Frame_2
AA_Element_28
AA_Element_2 - 75%
AA_Element_57 - 50%

When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.10 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start off with New image 851 x 315 as we are doing a Facebook timeline banner.

 Using the AA_Paper_3, go to your image you are working on. Click on your flood tool. In materials section, change it from color to pattern, right click on the pattern box and click other, than find the paper in the choices and click on it, then click ok. Now using your flood tool, just click inside the image and it will fill the image with the paper.  

 

Copy and paste, AA_Element_28(Colored swirl clouds), as a new layer and then move to the bottom left.** Add drop shadow.

 

Copy and paste AA_Paper_2 as a new layer.

Copy and paste AA_Element_18(Colorful see through stars) as a new layer.

Copy and paste AA_Frame_2(3 joined circles) as a new layer. Move up just a tad.** Using your magic wand, (Mode- Add(shift); Match Mode- Color; tolerance- 20) and click inside each circle. Now go to selections- modify- expand by 3; Selections- invert and on the AA_Paper_2 layer, hit delete on your keyboard. Selections- none. All that should be left of the paper is what you see inside each circle. Now add a drop shadow to the frame.

 

Copy and paste AA_Element_28(Colored swirl clouds) as a new layer and move to bottom right corner.** Add drop shadow.

Copy and paste AA_Element_2(Black Unicorn) as a new layer. click on Image- flip horizontal, and move to the right to look like it is standing on cloud some.** Add drop shadow.

Copy and paste AA_Element_57(The unicorns made me do it word art) as a new layer and add drop shadow.

On top layer - Layers - New raster layer; selections, select all; selections, modify, contract by 6; selections, invert. Using flood tool pick a color from your banner. I chose a yellow (#fff6ac) Selections- none. Add drop shadow

Add proper copyright. url and Lic if required.
With just using a kit and this being a Facebook banner you would put
Kit "Attitude Adjustment" by Creative Scraps by Crys
Add name and your done.

This tutorial "The Unicorns Made Me Do It" was written by
Rebecca Albertson on 6/28/18.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this  tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.

I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
"The Unicorns Made Me Do It" tut in the subject line.
Can't wait to check them out!