Showing posts with label St. Patricks Day. Show all posts
Showing posts with label St. Patricks Day. Show all posts
Tuesday, March 26, 2013
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used Erica Leigh Currey.
You need a license to use her work. You can get it
and her work at The PSP Project.
FTU kit Never too Green by Scraps Dimensions.
Mask 42 MB and SW from Moonbeams and Spiderwebs.
Font of choice I used Dobkin.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Tube - Resize to fit
SD NTG FRAME 4 - 65%
SD NTG PAPER 2 - 75%
SD NTG GLITTER SWIRL 1 - 75%
SD NTG LEAVES - 70%
SD NTG FLOWER 2 - 25%
SD NTG FLOWER 2 - 25%
SD NTG BOW 1 - 25%
SD NTG PAPER 8
Mask 42 MB and SW
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste SD NTG FRAME 4 as new layer.
Using magic wand click inside frame. Selections Modify
Expand by 2, invert. Copy and paste SD NTG PAPER 2 as new layer.
Delete Move to under frame layer.
Copy and paste SD NTG GLITTER SWIRL as new layer.
Move to left of frame.** Selections none.
Add drop shadow to frame.
Copy and paste tube as new layer. Resize to fit.
Move to the right of frame.** Add drop shadow.
Copy and paste SD NTG LEAVES as new layer.
Move to bottom of tag.** Add drop shadow.
Copy and paste SD NTG FLOWER2 as new layer. Move to bottom
left.** Add drop shadow. Duplicate resize by 85%. Move slightly
to right of first flower and down a bit.** Merge Down.
Duplicate Image Flip Horizontal Move to right of
tag.**
Copy and paste SD NTG FLOWER 2 as new layer.
Move to center of other flowers.** Add drop shadow.
Copy and paste SD NTG BOW 1 as new layer.
Move to over frame layer and to the left top of frame.**
Add drop shadow.
Copy and paste SD NTG PAPER 8 as new layer.
Move to bottom. Layers, New mask layer, from Image.
Find the mask in the list click ok Merge group.
Add proper copyright. url and Lic if required.
Add name drop shadow and your done.
This tutorial was written by Rebecca Townsley on 3/26/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Never too Green in the subject line.
Can't wait to check them out!
Wednesday, March 20, 2013
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
Tube of choice. I used Alena Lazareva.
You need a license to use her work. You can get it
and hoer work at The PSP Project.
PTU kit Lucky Clover by Irish Princess Designs.
Mask mythmask45 by Mythical from Creative Misfits Blog.
Font of choice I used Sloop.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Tube - 75 luminance duplicate hardlight
tube background
IBD_LC_Frame3 - 85
IBD_LC_Banner
IBD_LC_Rose1 - 50
dup 75 dup 75
IBD_LC_Doodle
IBD_LC_Bouquet - 50
IBD_LC_Paper5
mask
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.75.7 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open new Image 600x600.
Copy and paste IBD_LC_Frame3 as new layer.
Copy and paste the background layer of the tube as new layer.
Images Flip horizontal. Move down and to left just a tad.**
Make bottom layer.
Using magic wand click inside frame.
Selections modify expand by 2 Selections invert,
delete, Selections none. Add drop shadow to frame.
Copy and paste IBD_LC_Banner as new layer.
Move to top of frame.** Add drop shadow.
Copy and paste tube as new layer.
Move to right of frame and up to
look like sitting on it.** Blend Luminance(L)
Duplicate blend hardlight. Add drop shadow to first layer.
Copy and paste IBD_LC_Bouquet as new layer.
Move to bottom right of tag.** Add drop shadow.
Copy and paste IBD_LC_Rose1 as new layer.
Move to bottom left of tag.** Duplicate resize by 75%
Move to right a bit.** Duplicate that one resize by 75%
Move to right a bit.**
Copy and paste IBD_LC_Doodle as new layer.
Move to top of tag and place as bottom layer.**
Add drop shadow.
Copy and paste IBD_LC_Paper5 as new layer.
Move to bottom layer.
Layers, New mask layer, Find mask in list, click ok.
Merge group.
Add proper copyright, url, and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 3/20/13.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Lucky Fairy in the subject line
Can't wait to check them out!
Friday, July 13, 2012
This tut was made using PSPx4
And knowledge of PSPx4.
Supplies needed
FTU Rockin' Irish from Irish Princess Designs HERE.
Tube of Choice. I am using Susan Justice.
You need a lic to use her work. You can get it and her work at *Coming Soon*
Font Of Choice I used space pontiff. You can get it HERE.
Template used Template 69 from Melissaz Creationz HERE.
Mask is GrungeMask4byJenny from Creative Misfits blog HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template shift+d to duplicate close original.
Delete the Info layer on top.
On Rastor 3 select all - float - defloat - invert.
Open paper13 resize by 60% copy and paste as new layer
delete - selections none.
On Rastor 4 select all - float - defloat - invert.
Open paper2 resize by 60% copy and paste as new layer
delete - selections none.
Pick a color from the tube. Using change to target brush
On Rastor 8, Rastor 5, and the top small dark rectangle boxes.
On Rastor 5 - Adjust - Add/remove noise - add noise.
Effects - Inner Bevel to your liking add drop shadow.
Add drop shadow to Rastor 8 as well.
On the small dark rectangles go to effects - textures
weave using gap size 6, width 6, Opacity 100 color for weave
a color from tube. Click ok. Add drop shadow.
On Rastor 2 and the two long rectangle frames
I used a color from the skin of the tube
and change to target brush then added a drop shadow to both.
On Rastor 6 useing a color from the tube and change to target brush.
Repeat for the merger dots. add drop shadow to dots.
Open tube copy and paste as new layer on top. Move to left of tag.**
Add drop shadow.
Open Frame resize by 65% copy and paste as new layer under the tube layer.
Open Guitar resize by 45% copy and paste as new layer.
Place to right of tag.** Add drop shadow.
Open Music 1 resize by 25% copy and paste over the square layer. using pick tool
turn it a bit. Add drop shadow Duplicate using pick tool turn in oppisite direction.
On the square layer - Effects - tectures - fur using
blur 0, length 100, density 100, trans. 0. Repeat.
Open flames resize by 55% copy and paste as new layer. Add drop shadow.
Move to very bottom layer. and then up to top of tag a bit. Duplicate
Image flip vertical move to bottom of tag.
For mask open paper 16 and paste as new layer. Move to bottom layer.
Layers - New mask layer - from image - find the mask on the list and click ok.
Merge group. Opacity to 50%
Add proper/clear copyright and Lic.# (If Needed)
Add name and were done. For the name i used an inner bevel as
First row going down 2, 24
Second Row gowing down 30, 18, 4, 31
Third row going down color white, 298, 40, 40
add drop shadow done.
This tutorial was written by Rebecca Townsley on 7/13/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Irish Chick Result in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)