This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used Barbara Jensen.

You need a license to use her work. You can get it 

and her work at her store HERE.

PTU kit Rockabilly Wedding by Scrappin Krazy Designs.

Mask MB and SW Mask 39 from Moonbeams and Spiderwebs.

Font of choice I used AdineKirnberg. 

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

Tube - 80%

MB and SW Mask 39

ele24 - 90%

ele37 - 90%

ele56 - 50%

ele59 - 50%

ele61

ele25

ele09 - 50%

p18 - 75%

p09

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.75.7 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste ele24 as new layer

Using magic wand click inside each 

square of frame. Selections, expand by 2

invert On paper delete selections none

Copy and paste tube as new layer.

Move to left of tag.

Copy and paste ele37 as new layer.

Move to bottom left of frame. 

Just over tube.** Add drop shadow.

Copy and paste Close up of tube as 

new layer. Image Flip Horizontal.

Place under the frame and to the right.** 

On the Paper layer Selections all, float, 

defloat, invert. On the close up of tube 

delete, selections none. Blend mode Hardlight 

On frame, add drop shadow.

Copy and paste ele56 as new layer. Place to the left

and bottom of frame over the flowers.** Add drop shadow.

Copy and paste ele59 as new layer. Place just to right 

of the heart** Add drop shadow.

Copy and paste ele61 as new layer. Image, free rotate,

90 degrees to the right, Image, flip horizontal.

Move to upper right hand corner of frame.**

Add drop shadow.

Copy and paste ele25 as new layer. 

Move to bottom layer.

Copy and paste ele09 as new layer. 

Move to top right of frame.**

Copy and paste p09 as new layer. Move to very bottom layer.

Layers, New mask layer, from image, find the mask in the list

click ok. Merge group.

Add proper copyright. url and Lic if required.

Add name Inner Bevel, Bevel 2, width 1

Smoothness 50, Depth 11, Ambience -4, Shineness 71

color (same you used for font), Angle 0, Intensity 28, 

Elevations 42. Add drop shadow settings 2.2.100.6 Color white.

This tutorial was written by Rebecca Townsley on 2/28/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Passions in the subject line

Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used Henning Ludvigsen.

You need a license to use his work. You can get it 

and his work here at The PSP Project.

PTU kit This Love by Rabid Designs. 

Mask StaciMisfitAutumnFallMask1 from Creative Misfits Blog.

Font of choice I used Times New Romance. 

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

Tube

Mask

frame1 - 85%

ele8

ele9 - 50%

ele45 - 50%

ele50 - 75%

Paper11 - 75%

Paper4

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste frame1 as new layer. Image free rotate,

to the right by 45 degrees all layers NOT checked.

Using Magic Wand Click inside each part of frame.

Selections, expand by 15, invert.

Copy and paste Paper11 as new layer.

Delete Selections none.

Copy and paste tube as new layer. Using pick tool 

rotate to the left.** Add drop shadow. On Frame Selections

all, float, defloat, on tube erase part at bottom of frame.**

Add drop shadow to frame.

Copy and paste ele8 as new layer. Move to bottom layer.

Add drop shadow.

Copy and paste as new layer. Move to bottom left

of tag.** Add drop shadow.

Copy and paste ele45 as new layer. Move to bottom right.

and under the roses.** Add drop shadow.

Copy and paste Paper4 as new layer. Layers, new mask layer,

from image, find name in list click ok. Merge group.

Add proper copyright. url and Lic if required.

Add name Inner Bevel, Bevel 2, width 8

Smoothness 0, Depth 12, Ambience 0, Shineness 0

color white, Angle 315, Intensity 30, Elevations 60

Add drop shadow and your done.

This tutorial was written by Rebecca Townsley on 2/14/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Pink Love in the subject line

Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used Kiwi Fire Storm's Chantelle.

You need a license to use his work. You can get it 

and his work here at The PSP Project.

PTU kit Marry The Night by Killer Kitty.  

Which is not Available for at least a Couple of weeks.

Will add here when it is Available.

Font of choice I used Allegro. 

EyeCandy 4000 Gradiant Glow

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

Tube - 70%

K4-MarryTheNight-Frame02

K4-MarryTheNight-CityScape01

K4-MarryTheNight-Charm02 - 75%

K4-MarryTheNight-Diamonds

K4-MarryTheNight-GlitterDoodle

K4-MarryTheNight-JeweledFlower - 75%

K4-MarryTheNight-Mask01 - 30%

K4-MarryTheNight-Hearts

K4-MarryTheNight-Sparkles - 96%

K4-MarryTheNight-Paper05 - 67%

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open new Image 600x600.

Copy and paste K4-MarryTheNight-Frame02 as new layer.

Using Magic Wand Click inside the frame. Even in the outside corners.

Selections, Modify, Expand by 2, Invert.

Copy and paste K4-MarryTheNight-Paper05 as new layer.

Delete Move to bottom layer, selections none.

Add drop shadow to Frame.

Copy and paste tube as new layer. 

Add drop shadow.

Copy and paste K4-MarryTheNight-CityScape01 as new layer.

Move to under frame and down a bit. Erase the sides that hang

out from frame.** 

Copy and paste K4-MarryTheNight-Charm02 as new layer.

Move to upper right corner of frame and place under tube layer.**

Add drop Shadow.

Copy and paste K4-MarryTheNight-Diamonds as new layer.

Move to very bottom layer.**

Copy and paste K4-MarryTheNight-GlitterDoodle as new layer.

Move to under paper layer, up and to left a bit.**

add drop shadow.

Copy and paste K4-MarryTheNight-JeweledFlower as new layer.

Move to bottom right of tag.**

Add drop shadow.

Copy and paste K4-MarryTheNight-Mask01 as new layer.

Using Pick tool rotate a bit to the left. 

Move to Upper left corner.**

Add drop shadow.

Copy and paste K4-MarryTheNight-Hearts as new layer.

Move to above frame layer and to the left a bit.**

Add drop shadow.

Copy and paste K4-MarryTheNight-Sparkles as new layer.

Add proper copyright. url and Lic if required.

Add name. For name you will use color from tube and 

for stroke 1.0 color black. Use EyeCandy Gradiant Glow.

Color white width 8 soft 25 overall 100 draw on outside checked.

Add drop shadow of 2, 2, 100, 5. And your done.

This tutorial was written by Rebecca Townsley on 2/14/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Marry the Night in the subject line

Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed

Tube of choice. I used Joel Adams.

You need a license to use his work. You can get it

and his work here at CDO.

PTU kit Rock My World  by Eclipse Creations at The PSP Project.

Mask DBVGrungeMisfitmask2 from Creative Misfits Creations Blog.

Font of choice I used Skinny Cap Kick.

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

Mask

Tube

Template

EC_RMW_P5 - 75%

EC_RMW_P8 - 75%

EC_RMW_P7 - 75%

EC_RMW_P2 - 75%

EC_RMW_P1

EC_RMW_Cupcake1 - 75%

EC_RMW_Flame2

EC_RMW_Glitter

EC_RMW_SkullGitar - 75%

EC_RMW_Clip - 75%

EC_RMW_Musicalnotes2 - 75%

EC_RMW_Lilly2 - 75%

EC_RMW_Lilly - 65%

EC_RMW_HeadPhones2

When you see ** look at tag to see placement for Elements.

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag.

I have made a tag or to and not check and when I got done

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Open Template Shift+D to duplicate.

Close original resize by 75%

Delete CR Info layer.

On Drk. Plum Circle2 layer. Selections, all

float, defloat, invert. Copy and paste EC_RMW_P5

as new layer. Delete.Selections none. Add drop shadow.

Repeat for Drk. Plum Circle1.

On Dotted Circle1 Pick a color from tube,

Using Change to target brush go over the dots.

Add drop shadow. Repeat for Dotted Circle2, Dotted Square1,

Dotted Square2, Dotted Rect Frame, Plum Rect,

Drk. Plum Rect, Dotted Circle, and word art.

On Violet Circle2 layer. Selections All,

float, defloat, invert. Copy and paste EC_RMW_P8

as new layer. Delete. Selections none. Add drop shadow.

Repeat for Violet Circle2.

On Plum Circle layer. Selections all, float,

defloat, invert. Copy and paste EC_RMW_P7 as new layer.

Delete, Selections none, Add drop shadow.

On Violet Circle layer. Selections all, float,

defloat, invert. Copy and paste EC_RMW_P2 as new layer.

Delete, Selections none, Add drop shadow.

On White 3/4 Circle layer flood fill with

a lighter color of what you used on the

dotted circles and squares. Add drop shadow.

Copy and paste EC_RMW_Flame2 as new layer.

Move up a tad and erase habg over from bottom

under the bottom rectangle. Add drop shadow.

Over this layer Copy and paste tube as new layer.

Add drop Shadow.

Copy and paste EC_RMW_Cupcake1 as new layer.

Move to top layer and to the bottom right.**

Add drop shadow.

Copy and paste EC_RMW_Glitter as new layer.

Move to Bottom layer.

Copy and paste EC_RMW_SkullGitar as new layer.

Move to under Tube layer and to the top left a tad.**

Add drop shadow.

Copy and paste EC_RMW_Clip as new layer. Move

to top layer and place to the left of cupcake.**

Add Drop shadow.

Copy and paste EC_RMW_Musicalnotes2 as new layer.

Move to under the cupcake layer and to the bottom left.**

Copy and paste EC_RMW_Lilly2 as new layer.

Place over the musical notes.** Add drop shadow.

Copy and paste EC_RMW_Lilly as new layer. Place down and to right of

first lilly.** Add drop shadow.

Copy and paste EC_RMW_HeadPhones2 as new layer over the

cupcake layer. Place them to look like they are wearing

them.** Add drop shadow. On Cupcake Selections all, float,

defloat, invert. Erase the part of the headphones that are

right of cupcake. Selections none.

Copy and paste EC_RMW_P1 as new layer.

Move to bottom layer. Layers, New Mask layer, from image.

Find the mask in the list Click ok Merge Group.

Add proper copyright. url and Lic if required.

Add name and your done.

This tutorial was written by Rebecca Townsley on 1/29/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Rock My World in the subject line

Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used Barbara Jensen.

You need a license to use her work. You can get it 

and her work at her store HERE.

PTU kit Punktines Day by Amy Marie at Mystic Scraps. 

Mask 41 MB and SW Mask by Moonbeams and Spiderwebs.

Font of choice I used AKMy Prince. 

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

Tube - 85% 

Mask

Elements:

6

7

9 - 55%

15 - 85%

43 - 85% 

44

50

58

76

Papers:

pp1 - 75% 

pp9

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start with New rastor image of 600x600

Copy and paste 43 as new layer.

Copy and paste 44 as new layer and place under the frame.

Use magic wand and click inside of frame. Selections Modify

expand by 2 invert. 

Copy and paste pp1 as new layer under the frame.

Delete selections none. Add drop shadow to Frame.

Copy and paste tube as new layer over the frame.

Move over to right of frame.** Duplicate Blend Hardlight.

Back on First tube Add drop shadow.

Copy and paste 58 as new layer. Place Under frame 

Copy and paste 50 as new layer. Place as bottom layer.

Move slightly up.** Add drop shadow.

Copy and paste 6 as new layer under tube layer.

Move to left of tag.** Add drop shadow.

Copy and paste 76 as new layer. 

Move to left of tag and 6.** Add drop shadow.

Copy and paste 9 as new layer. Move to bottom left of tag.**

Add drop shadow.

Copy and paste 7 as new layer over the tube layer.

Move down to bottom of tag.** Add drop shadow.

Copy and paste 15 as new layer. Move to bottom of tag.**

Add drop shadow.

Copy and paste pp9 as new layer. Move to very bottom.

Layers, New Mask Layer, From image, Find the mask in the list.

Click ok. Merge Group.

Add proper copyright. url and Lic if required.

Add name and your done.

This tutorial was written by Rebecca Townsley on 1/29/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Sweet Love in the subject line

Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

Tube of choice. I used Camilla Drakenborg.

You need a license to use her work. You can get it 

and her work at The PSP Project.

PTU kit A Very Merry Winter by Tashas Playground.  

Mask MB and SW Mask 15 by Moonbeams and Spiderwebs.

Font of choice I used young love es. 

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

tube - 80%

frame2

paper10 69%

paper2 75%

snow mound 65%

branch

bird

berries 50%

wordart

MB and SW Mask 15

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start with New rastor image of 600x600

Copy and paste frame2 as new layer.

Move to right and up just a tad.**

Copy and paste tube as new layer.

Place behind frame.** Erase any overhang

from behind frame. Add drop shadow.

Copy and paste paper10 as new layer.

Place behind tube.** Erase any overhang

from behind frame.

Copy and paste snow mound as new layer.

Place over and move to bottom of frame.**

Copy and paste dots as new layer.

Place over the snow mound.**

Copy and paste branch as new layer.

Place over the dots and snow mound.**

Add drop shadow.

Copy and paste bird as new layer.

Move to right of branch.**

Add drop shadow.

Copy and paste berries as new layer.

Place to bottom left of the tag.**

Copy and paste wordart as new layer.

Place kinda to the top.**

Add drop shadow.

Copy and paste papaer2 as new layer.

Move to bottom layer.

Layers, New mask layer, Find the mask in 

the list click ok merge group.

Add proper copyright. url and Lic if required.

In this case I just used a kit. So the proper

copyright would be whatever the Designer has in their

TOU. ALWAYS read the TOU of a designers products.

Add name and your done.

This tutorial was written by Rebecca Townsley on 1/20/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Bee My Honey in the subject line

Can't wait to check them out!

This tut was made using PSPx5

And knowledge of PSPx5.

Supplies needed 

PTU kit Queen Beeatricw by Wicked Princess Scraps.  

Font of choice I used TheNauti Gal. 

Go ahead and open list of Things here used and go ahead and resize them

by the percentage by each item. If there is no number no need to resize.

WP_QB_FLOWERVINE8

WP_QB_BEECOUPLE - 50%

WP_QB_FLOWERSPRAY

WP_QB_FLOWER2

WP_QB_RIBBON 75%

WP_QB_CIRCLESFRAME

WP_QB_PP4

WP_QB_PP8

When you see ** look at tag to see placement for Elements. 

Sometimes it is hard to say just how to place it.

Drop shadows added are 0.0.100.4 unless otherwise stated.

It is always good to check for overhang of shadow on edges of tag. 

I have made a tag or to and not check and when I got done 

I would post it and see the over hang on the sides and think MAN!! lol

Remember to save often.

Start with New rastor image of 800x300

Use paper WP_QB_PP4 as a pattern and floodfill the layer.

Copy WP_QB_FLOWERSPRAY paste as new layer.

Add drop shadow. Move to top of tag.**

Duplicate image flip vertical move 

to bottom of banner.**

Copy WP_QB_FLOWERVINE8 paste as new layer.

Move to left and up a bit.** Add drop shadow.

Copy WP_QB_CIRCLESFRAME paste as new layer.

move to left of banner.** Add drop shadow.

Copy WP_QB_FLOWER2 paste as new layer.

move to bottom right** Add drop shadow

Copy WP_QB_RIBBON paste as new layer.

Move to bottom right over flowers.**

Add drop shadow. On Banner Selections 

all float defloat. 

Erase part of the vine and flower to left

of ribbon. 

Copy WP_QB_BEECOUPLE paste as new layer.

Move to left of banner. ** Add drop shadow.

Selections, all, float, defloat, modify,  

contract by 5, invert.

New layer use WP_QB_PP8 as pattern

floodfill, selections none.

Add drop shadow of 3, 3, 100, 11

Add another drop shadow of -3, -3, 100, 11.

Add proper copyright. url and Lic if required.

In this case I just used a kit. So the proper

copyright would be whatever the Designer has in their

TOU. ALWAYS read the TOU of a designers products.

Add name and your done.

Remember with Facebook Timelines you are no longer allowed to use the URL of the Artist.
AND also no long allowed to use the URL of the Designer if just using a kit.
Just give the proper credit for a facebook timeline banner.

This tutorial was written by Rebecca Townsley on 1/10/13.

Any similarity to any other tutorial is purely coincidental.

Any creations you make following this  tutorial is yours

to do with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

I would love to see your results!

If you would like them shown on my blog

Send them to dragonsfairy_25@hotmail.com with

PTU Bee My Honey in the subject line

Can't wait to check them out!