Thursday, November 22, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit Lolliepop Guild by Irish Princess Designs
Which is an Exclusive kit at Scrap Candy HERE.
Tube of Choice. I am using Jasmine Becket-Griffith.
You need a lic to use her work. You can get it and her work HERE.
Mask used MB and SW Mask 20 from Moonbeams and Spiderwebs.
You can get it HERE.
Font of choice I used . You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
New image 600x600
Open IBD_Frame2 Resize by 83%. Copy and paste as new layer.
Using magic Wand Click inside frame. Selections - expand by 2- invert.
Open paper of choice Resize by 69% Copy and paste as new layer.
Move to under frame layer, delete selections none.
Add drop shadow to Frame.
Open tube copy and paste as new layer. You may or may not need to resize.
This tube I did not have to resize. Place in center of Frame**
Duplicate Blend Hard light. Add drop shadow.
On frame Selections all , float, defloat.
On tube erase bottom to look like she is coming out of the frame.**
There will be over hang at the bottom.
Leave it :).
Open IBD_Bowlolly resize by 50% Copy and paste as new layer.
move to left of tag erase bottom to look like is it coming out
of the frame.** Selections none. Add drop shadow
Open IDB_HeartRibbon Copy and paste as new layer.
Move to bottom layer** add drop shadow.
Open IBD_CandyBox Resize by 30% Copy and paste as new layer.
Image - Flip horizontal Move to bottom right of tag. Add drop shadow.
Open IBD_Bonbon resize by 10% copy and paste as new layer.
Move to candy box.** Add drop shadow, duplicate 2 times and move them
around just a tad.**
Open IBD_Paper3 copy and paste as new layer.
Move to bottom layer. Open mask.
On Tag Layers, New mask layer, from image. Find the mask in the list
click ok merge layers.
Add proper/clear copyright and Lic.# (If Needed)
I added the saying DelightFall Fairies to it. and then a name.
This tutorial was written by Rebecca Townsley on 11/22/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Sweet Candy in the subject line
Can't wait to check them out!
Thursday, November 15, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
FTU Kit Northern Light by Designs by Vaybs HERE.
Tube of Choice. I am using Steve Baier.
You need a lic to use his work. You can get it and his work HERE.
Font of choice I used Shelly Volante BT. You can get it HERE
Eye Candy 4000 Gradiant Glow.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
New image 600x250
Floodfill with any color Copy
Open DBV_NorthernLightPaper (6) Paste the white layer on it.
Selections all, float, Defloat, Select the paper layer and copy
Paste as new layer on the Sig tag. Delete white layer.
Open DBV_NLElement Resize by 75% Copy and paste as new layer.
Move to the left of tag and down.** Add drop shadow.
Open DBV_NLElement (32) Copy and paste as new layer.
Move to bottom left of tag.** Add drop shadow.
Now you want to Hide the white layer and Merge Visable.
Name this layer Background layer.
Open tube copy and paste as new layer. You may or may
not have to resize depending on the tube use. This one I used
I did not have to resize. Move to the right of the tag and down.**
Add drop shadow.
One the background Selections All. Select tube layer, then Selections invert
Delete. This will get rid of the over hang tube. Selections none.
Back on the background Selections All, Modify Contract by 5, invert
Add new rastor layer. Move this layer to the top. Invert, flood fill
with a color from tag. Selections none. Adjust, Add/remove noise,
add noise Gaussian, 50% Monochrome checked. ok. Add drop shadow.
Now go ahead and add proper/clear copyright and Lic.# (If Needed)
If you wish to add the Baby Its Cold Outside add it now. Then your name.
I used eyecandy 400 gradiant glow on the quote and the name.
Settings glow 3, soft corners 0, overall opacity 100, Draw only on outside checked.
Added a drop shadow of 2, 2, 100,5.
If you do not plan on animating then you are done with this part
of the Signature.
For the animation
Hide the background layer and your name Merge Visable.
Unhide the other layers. Over the background layer add new layer
floodfill with black. Duplicate 2 times. First layer name Snow 1
Middle Snow 2 and the top one snow 3.
Go to Snow 1 Adjust add/remove noise Add noise settings are
Random, 100%, Monochrome checked. Adjust, Blur, Blur.
Adjust, Brightness and contrast, levels, Settings are
RGB, 37, 58, 85 click ok Blend mode Screen.
Repeat on Snow 2 and Snow 3.
Hide the merged layer with the tube, Snow 2 and snow 3.
Copy merged. Open animation shop paste as new animation.
Hide Snow 1 and unhide Snow 2 Copy Merged and in animation
shop paste after current frame. Hide Snow 2 and unhide Snow 3.
Copy merged and paste after current frame. Edit select all.
You have your snowy background now.
In psp hide background and snow layers. Unhide the merged layer
with the tube. It should consist of Quote, Tube, and frame and copyright.
Paste in animation shop. Edit duplicate selected, repeat.
Edit Select all.
Now you want to make sure you are on F:1 Click and Drag it to F:1
of your snowy background making sure it is all in right place before
you let go.
If you plan on making this for more then one person I sugest you save it now
in animation. Then all you have to do is open it and add name like this..
Back in psp copy your name and repeat same steps and you did before
with the frame, tube, quote, copyright layer.
For the Avitar in PSP
On the sig tag (after you save it for a blank if your gonna save it)
Delete the top layer, name and the snow layers.
Using crop tool set it to W 150, H 150 Move to a part of
the background you want in the avi. Click on the check.
Image Flip Horizontal. Selections all, Modify, contract by 4, invert.
Add new rastor layer flood fill with same color used on Sig.
Selections none.
Adjust Add/remove noise, add noise, Settings
Gaussian, 50% Monochrome checked. ok. Add drop shadow.
Using same font as before add your First letter or if it fits
name which ever you prefer and save. Settings for gradiant glow
and drop shadow for this are the same as used on the name
and quote in the Sig.
This tutorial was written by Rebecca Townsley on 11/15/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Baby It's Cold Outside in the subject line
Can't wait to check them out!
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU kit DelightFall by Tasha's Playground HERE.
Tube of Choice. I am using Carrie Hall.
You need a lic to use her work. You can get it and her work *Coming Soon*
Mask used MB and SW Mask 47 from Moonbeams and Spiderwebs.
It says 46 but it is really 47. You can get it HERE.
Font of choice I used Saliere. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
New image 700x600
Open frame 1 copy and paste as new layer.
Using magic wand click on inside of frame. Selections, modify
expand by 2, invert.
Open paper8 resize by 76% Copy and paste as new layer.
Delete, Selections none move to under frame layer.
Copy tube and paste as new layer.Move to right a bit.
She will look like she is sitting on the frame.**
Add drop shadow. On frame Selections, all, float, defloat,
invert. On tube layer erase the part at bottom.**
Open berries2, resize by 75% copy and paste as new layer.
Move to left of frame.** Add drop shadow.
Open lights copy and paste as new layer. Move to under frame layer
and up a bit.** Add drop shadow of 0,0,50,5.
Open mushroom house resize by 50% copy and paste as new layer.
Move to top layer, down and over to right of frame.**
Add drop shadow.
Open sparkle 2 copy and paste as new layer on top.
Move to right of frame.** Duplicate, Image, flip horizontal.
Move to left of frame. Add drop shadow to Frame.
Open paper3 copy and paste as new layer move to bottom layer.
Open mask. Layers, new mask layer, from image click ok.
Merge group. Resize ALL layers by 86%.
Add proper/clear copyright and Lic.# (If Needed)
I added the saying DelightFall Fairies to it. and then a name.
This tutorial was written by Rebecca Townsley on 11/15/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU DelightFall Fairies in the subject line
Can't wait to check them out!
Wednesday, November 7, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
FTU Kit The Red White and Blue by Tasha's Playground HERE.
Tube of Choice. I am using Pin Up Toons.
You need a lic to use his work. You can get it and his work HERE.
Mask used MB and SW Mask 35 from Moonbeams and Spiderwebs.
You can get it HERE.
Font of choice I used TheNautiGal. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
New image 600x600
Open frame3 copy and paste as new layer resize by 90%.
Click inside of frame withmagic wand. Selections - Expand by 2
Selections invert.
Open paper10 resize by 86% copy and paste as new layer. Delete
Move to under frame layer Selections none. Add drop shadow to frame.
Open swirl2 Resize by 90% copy and paste as new layer. Place over the frame layer.
will be to right of tag and down a bit.** Add drop shadow.
Open Tube copy and paste as new layer. Depending on the tube it may or may
not need to be resized. The one I am useing did not have to be.
Move to right of tag and over the swirl to look like she is sitting on the swirl.
Add drop shadow.
Open butterfly2 copy and paste as new layer. Move to top left of tag.**
Add drop shadow. Duplicate Resize by 50% Image Flip Horizontal move down just a tad.**
Open mask
Open paper7 copy and paste as new layer. Move to bottom layer.
Layers New mask layer find the mask in the list and click ok.
Merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add a Veterans day Quote if you wish, Your name,
and drop shadow.
This tutorial was written by Rebecca Townsley on 11/07/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
FTU Land of the Free in the subject line
Can't wait to check them out!
Tuesday, October 30, 2012
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU Kit Wild One by Rissa's Designs HERE.
Tube of Choice. I am using Elias Chatzoudis.
You need a lic to use his work. You can get it and his work HERE.
Mask used MB and SW Mask 20 from Moonbeams and Spiderwebs.
You can get it HERE. I love her masks!
Template used PunkyPookerCollabTemp1 from Elegant Insperations.
You can get the template HERE.
Font of choice I used Ravie. You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open Template Shift+D to duplicate close original.
Delete the CR info layer.
Adjust - Add/Remove noise - Add Noise Settings
Gaussian 50% Monochrome Checked On the following layers..
Black Squares
Left Cirlce Frame
Right Circle Frame
Middle Circle Frame
Left Square Frame
Right Square frame
Lil Black Circle
Black Rectangle
Purple Circle Back1
Purple Circle Back2
Purple Rect1
Purple Rect2
Add Drop Shadow to those layers as well.
Open RD_Paper12 Make it your pattern and using floodfill
Match mode RGB Value, Tolerance 10, Use all layers unchecked,
Blend mode normal, opacity 100 Flood fill Following layers
Left Square
Right Square
Repeat that step with the following papers and layers.
Open RD_Paper8 on Black Circle. Add Drop Shadow
Open RD_Paper2 use on White circle2 and White Circle3
Open RD_Paper9 use on Pink Rectangle, Pink Rect1, and Pink Rect2
Open RD_Paper7 use on Left Circle, Right Circle, and Middle Circle
Open RD_Paper6 Use on White Circle1
On to the Elements.
Open RD_Bones String 1 Copy and paste as new layer
over the Dotted lines layer and move to top right of tag.**
Add Drop shadow.
Move Black Squares down to over left square frame.
Open RD_Swirlie 1 Copy and paste as new layer over the Black Squares.
Move to left of tag.** Add drop shadow.
Open RD_Case Resize by 75% Copy and paste as new layer.
Move to bottom left of tag.** Add drop shadow.
Open Barbed Heart 3 resize by 75% Copy and paste as new layer.
Move to bottom right of tag.** Add drop shadow.
Open RD_Speakers Copy and paste as new layer. Place under the heart layer.
Move to bottom Right of tag.** Add Drop Shadow.
Resize all layers by 67%.
Open Tube copy and paste as new layer.Copy and paste as new layer Just under
the case layer. Place to the left over the Left Circle Frame.** Add drop Shadow.
Use eraser tool erase bottom of tube to look like it is coming out of frame
If using a half tube. If whole place where you think it should be.
Open RD_City Scape 2 Resize by 90% Copy and paste as new layer over the
White Dotted layer.
Open RD_Paper6 paste as new layer move all way to bottom layer.
Open mask Layers - new mask layer - From Image Select the mask in the list
Click ok Merge Group. Change Opacity to 50.
Add proper/clear copyright and Lic.# (If Needed)
Add name. Using the following Settings Add drop shadow
and your done.
This tutorial was written by Rebecca Townsley on 10/23/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU I'm a Wild One Result in the subject line
Can't wait to check them out!
Tuesday, October 23, 2012
This tut was made using PSPx
And knowledge of PSPx5.
Supplies needed
PTU Kit Tropical Peach by Scrappin Krazy Designs HERE.
Tube of Choice one with a close up. I am using Tony Tzanoukakis.
You need a lic to use his work. You can get it and his work HERE.
Mask used Mask 43 MB and SW from MoonBeams and Spiderwebs.
You can get it HERE.
Font of choice I used Sloop . You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Startoff with a new image 600x600
Open ele19 copy and paste as new layer.
Open p14 resize by 75% Using magic wand click inside the frame.
Selections - Expand by 4 Selections invert.
On the paper layer Delete. Selections none.
Open ele23 copy and paste as new layer. Move to bottom right
of frame** add drop shadow.
Open ele37 copy and paste as new layer. Move to bottom right
of frame** add drop shadow.
Open ele44 copy and paste as new layer. Place under the frame layer
and to the bottom of tag.** Add drop shadow.
Open ele51 resize by 50% copy and paste as new layer on top move to
right of tag over the flowers.** Add drop shadow.
Open ele56 resize by 75% copy and paste as new layer. Image -
Flip horizontal move to top left of frame.** Add drop shadow.
Open ele16 copy and paste as new layer. Move to above paper layer.
Add a drop shadow to the frame. Open tube the one I used did not
need to resize it. It was the perfect size for how was used.
Copy and paste the tube as new layer. I moved it to where the face
was main veiw of frame and placed under the frame layer.Duplicate
Blend hard light. Merge down. Add droop shadow. Using eraser tool
erase any over hang from under the frame.
Open p04 copy and paste as new layer move to bottomlayer.
Open mask - layers, new mask layer from image Find the mask
in the kist click ok merge group.
Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
This tutorial was written by Rebecca Townsley on 10/23/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Pretty In Peach Result in the subject line
Can't wait to check them out!
Sunday, October 21, 2012
This will be a short and sweet tut.
This tut was made using PSPx5
And knowledge of PSPx5.
Supplies needed
PTU Kit Rainbows -N- Stuff by Rabid Designz HERE.
Tube of Choice one with a close up. I am using Ismael Rac.
You need a lic to use his work. You can get it and his work HERE.
Font of choice I used Space Pontiff. You can get it HERE.
Cluster Frame RNS Cluster 01 I made using her kit.
You can get it HERE.
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open RNS CLuter 01
Using Selections Tools pick Square shape. Make a square just a bit bigger
then the inside of the frame.
Open Paper_9 resize by 87% Copy and paste as new layer.
Seletions invert - on paper layer delete..move paper to under frame layer.
Open close up of tube Copy and paste as new layer just over the paper
layer. Place it how you want it. Erase any part of the tube outside of the
frame. Blend mode Screen.
Resize all layers by 85%.
Add proper/clear copyright and Lic.# (If Needed)
Add name. and your done.
on the name I used Inner Bevel Play with the settings till
you have something you like.
This tutorial was written by Rebecca Townsley on 10/21/12.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
PTU Colors of the Rainbow Result in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)